Investigation on the fabrication techniques of the rapidly solidified amorphous ribbons of Fe-B-Si alloys

Investigation on the fabrication techniques of the rapidly solidified amorphous ribbons of Fe-B-Si alloys

碩士 === 國立交通大學 === 機械工程研究所 === 74 ===

Bibliographic Details
Main Authors:	WU, LIAN-FU, 吳連福
Other Authors:	GUO, ZHEN-CI
Format:	Others
Language:	zh-TW
Published:	1986
Online Access:	http://ndltd.ncl.edu.tw/handle/42349032108132368417

Similar Items

Study on Fe-Si-B amorphous ribbon of annealed
by: Guan- Xuan Chen, et al.
Published: (2013)

The Development of Rapidly Solidified Magnesium – Copper Ribbons
by: Pastuszak M., et al.
Published: (2016-06-01)

Effects of Boron Content on Magnetic Properties of Fe-Si-B Amorphous Ribbons
by: Yu-Chan Wu, et al.
Published: (2014)

Aspects of Characterizing Rapidly-Solidified Al Alloy Powders and Ribbons for High-Temperature Usage
by: Ming-Shuing Chuang, et al.
Published: (1995)

Effect of carbon and aluminum on the formation of Fe-Si-B amorphous ribbon
by: Chen, Meng Wei, et al.
Published: (2014)

Nanocrystallization in Co67Cr7Fe4Si8B14 Amorphous Alloy Ribbons
by: Zahra Jamili-Shirvan, et al.
Published: (2013-12-01)

Hot Working Of Heat Resistant Rapidly Solidified AI-Fe-V-Si Alloy
by: Shimansky, D., et al.
Published: (1999-04-01)

Microstructural development during processing of rapidly solidified Al-Fe-(V,Si) alloys
by: Tongsri, Ruangdaj
Published: (2000)

Study of microstructures-properties evolution inannealed Fe-Si-B-C amorphous ribbons
by: Po-Yu Chen, et al.
Published: (2016)

Magnetoimpedance and Stress-Impedance Effects in Amorphous CoFeSiB Ribbons at Elevated Temperatures
by: Dmitriy A. Bukreev, et al.
Published: (2020-07-01)

Magnetic characterization of Fe-Al-B amorphous ribbons obtained by the melt spinning technique
by: Crespo R.D., et al.
Published: (2011-05-01)

The Fabrication and Properties of Rapidly Solidified Al-Cr- Zr- Ti Aluminum Alloys
by: Cheng San Wu, et al.
Published: (1994)

The influence of Si and V on the kinetics of phase transformation and microstructure of rapidly solidified Al-Fe-Zr alloys
by: Karpe B., et al.
Published: (2013-01-01)

Studies On Rapidly Solidified Al-Mn-Cr-Si And Al-Fe-V-Si Alloys : Processing - Microstructure Correlation
by: Srivastava, Avanish Kumar
Published: (2013)

The magnetocaloric effect of FeZr-based amorphous ribbons
by: Chia-chun Yeh, et al.
Published: (2008)

Creep strain recovery of Fe-Ni-B amorphous metallic ribbon
by: Juríková Alena, et al.
Published: (2007-06-01)

Structure and magnetic properties of Si-Fe ribbons produced by rapid solidification
by: Cunha, M. A. da
Published: (1988)

High MB Solution Degradation Efficiency of FeSiBZr Amorphous Ribbon with Surface Tunnels
by: Qi Chen, et al.
Published: (2020-08-01)

Microstructures and properties of rapidly solidified Al-Cr-Fe alloys for aerospace applications
by: Goodwin, Paul S.
Published: (1992)

Structure and Martensitic Transformation in Rapidly Solidified CoNiAlFe Alloy
by: Huiling Chen, et al.
Published: (2017-11-01)

Thermal effect on structural and magnetic properties of Fe78B13Si9 annealed amorphous ribbons
by: Soltani Mohamed Larbi, et al.
Published: (2017-01-01)

Effect of level of alloying and initial condition on stability of rapidly solidified A1-Fe-V-Si alloys at very elevated temperature
by: Solis-Ramos, Euripides
Published: (2005)

Phase equilibria and elastic moduli of rapidly solidified Fe-Cr-Mo-B and Fe-Cr-Ni-B alloys
by: Pan, Li-Mei
Published: (1992)

Structural Analyses on AlSi26Ni8 Rapidly Solidified Alloys
by: Orolinova, Maria, et al.
Published: (2008-02-01)

On the magnetic anisotropy in Fe78Si9B13 ingots and amorphous ribbons: Orientation aligning of Fe-based phases/clusters
by: X. Wang, et al.
Published: (2017-01-01)

Local Melting in the Catastrophic Shear Band of Amorphous Alloy Ribbons
by: Bengus(a), V.Z., et al.
Published: (1994-06-01)

Dendrite growth and micromechanical properties of rapidly solidified ternary Ni-Fe-Ti alloy
by: Ying Ruan, et al.
Published: (2017-10-01)

Structural transformation and property improvement of Fe78Si9B13 amorphous ribbon by pulsed laser processing
by: L.Y. Guo, et al.
Published: (2018-12-01)

Response of monocyte-derived dendritic cells to rapidly solidified nickel-titanium ribbons with shape memory properties
by: S Tomić, et al.
Published: (2012-01-01)

The effect of annealing treatment on the magnetic properties of Fe74Co3Si8B10Al1Nb4 amorphous alloy ribbon
by: Chien-Fan Chiang, et al.
Published: (2013)

Structure and properties of rapidly solidified magnesium alloys
by: Garboggini, Araripe do Amaral
Published: (1993)

Rapidly solidified aluminium-high silicon alloys
by: Alshmri, Faraj D. F.
Published: (2010)

The fabrication and characterization of rapidly solidified Cu-Zu-Al shape memory alloy wires
by: JIANG, MING-ZHI, et al.
Published: (1989)

Effect of solidification rate on the coarsening behavior of precipitate in rapidly solidified Al-Si alloy
by: Zhiyong Cai, et al.
Published: (2016-08-01)

Amorphous Fe72Cu1V4Si15B8 ribbon as magneto-impedance sensing element
by: Surla Radoslav, et al.
Published: (2016-01-01)

Power loss of amorphous ribbons
by: Price, M. H.
Published: (1983)

A study on the microstructures and characteristics of casting and rapidly-solidified Co-Fe-Ni-Ti alloys
by: chiu chin ju, et al.
Published: (2006)

Numerical Investigation of the Air Flow Effects on Amorphous Alloy Ribbon Formation
by: Li Yongpeng, et al.
Published: (2017-01-01)

Simulation and Analysis of Amorphous Alloy Ribbons by Planar Flow Casting Process
by: Shiuh-Wen Chang, et al.
Published: (2012)

Precipitation in rapidly solidified aluminium-chromium-iron alloys
by: Shollock, B. A.
Published: (1989)