Effect of Interstitial Elements on the Weldability of Ni-base Alloys

Effect of Interstitial Elements on the Weldability of Ni-base Alloys

Bibliographic Details
Main Author:	Aguilar, Louie
Language:	English
Published:	The Ohio State University / OhioLINK 2019
Subjects:	Engineering Metallurgy Nickel Alloys Solidification Cracking Filler Metal 52M Filler Metal 52MSS-C Cast Pin Tear Test
Online Access:	http://rave.ohiolink.edu/etdc/view?acc_num=osu1563367451520424

Similar Items

Solidification Cracking Performance and Metallurgical Analysis of Filler Metal 82
by: Orr, Michael Romanoff
Published: (2016)

Investigation of Weldability in High-Cr Ni-base Filler Metals
by: Luskin, Timothy Clark
Published: (2013)

The Weld Microstructure and Mechanical Properties of the Alloy 52 and Its Variants with Applied Electromagnetic Stirring during Welding
by: Tai-Jung Wu, et al.
Published: (2021-02-01)

Weldability Evaluation in Autogenous Welds of Alloys 230, 800H, and 825
by: Suh, Sanghyun
Published: (2016)

The Comparison of Cracking Susceptibility of IN52M and IN52MSS Overlay Welds
by: Min-Yi Chen, et al.
Published: (2019-06-01)

Evaluation of the Effect of Tungsten and Boron Additions on the Microstructure and Solidification Cracking Susceptibility of Fe-Mn-C Filler Metals
by: Lenzo, Jansen C., Lenzo
Published: (2016)

GTA Weldability of Rolled High-Entropy Alloys Using Various Filler Metals
by: Hyunbin Nam, et al.
Published: (2020-10-01)

Microsegregation Model Including Convection and Tip Undercooling: Application to Directional Solidification and Welding
by: Thomas Billotte, et al.
Published: (2018-07-01)

Effect of Interface Microstructure on Joint Strength of Zirconia/Titanium Alloy Brazed with Amorphous Zr-Ti-Ni-Cu Active Filler Metal
by: Sung Woo Park, et al.
Published: (2020-05-01)

Eutectic Backfilling: A Fundamental Investigation into Compositional Effects on the Nature of this Crack Healing Phenomenon for Ni-30Cr Weld Applications
by: Wheeling, Rebecca Ann
Published: (2018)

Infrared Brazing of CoCrFeMnNi Equiatomic High Entropy Alloy Using Nickel-Based Braze Alloys
by: Chieh Lin, et al.
Published: (2019-03-01)

Optimization and Application of the Strain-To-Fracture Test for Studying Ductility-Dip Cracking in Ni-base Alloys
by: Kreuter, Verner C., V
Published: (2015)

Research progress in high-entropy alloys used in brazing and surface engineering fields
by: LI Hong, et al.
Published: (2021-08-01)

High Entropy Alloys as Filler Metals for Joining
by: Dan Luo, et al.
Published: (2021-01-01)

Brazing of selected heat-resisting alloys using Ni-Pd filler metal
by: Michał Baranowski, et al.
Published: (2019-11-01)

Joining of AZ31 Magnesium Alloy to 6061 Aluminum Alloy with Sn-Zn Filler Metals Containing Trace Rare Earth Elements
by: Shih-Ying Chang, et al.
Published: (2019-06-01)

Investigation of the Thermal Conductivity of Silicon-Base Composites: The Effect of Filler Materials and Characteristic on Thermo-Mechanical Response of Silicon Composite
by: Giacomo Riccucci, et al.
Published: (2021-06-01)

A study of laser-arc hybrid weldability of nickel-base INCONEL 738 LC superalloy
by: Ola, Oyedele
Published: (2013)

A study of laser-arc hybrid weldability of nickel-base INCONEL 738 LC superalloy
by: Ola, Oyedele
Published: (2013)

Microstructure and Mechanical Property of 3003 Aluminum Alloy Joint Brazed with Al-Si-Cu-Zn Filler Metal
by: LI Xiao-qiang, et al.
Published: (2016-09-01)

Effect of phase formation due to holding time of vacuum brazed AISI 304L/NiCrSiB joints on corrosion fatigue properties
by: Johannes L. Otto, et al.
Published: (2020-09-01)

Research on a Low Melting Point Al-Si-Cu (Ni) Filler Metal for 6063 Aluminum Alloy Brazing
by: Chengyin Peng, et al.
Published: (2021-05-01)

A review paper on effect of the welding process of ceramics and metals
by: Yan Zhang, et al.
Published: (2020-11-01)

Diffusion Brazing of Ti-6Al-4V and Stainless Steel 316L Using AgCuZn Filler Metal
by: R. Soltani Tashi, et al.
Published: (2013-09-01)

A review on filler materials for brazing of carbon-carbon composites
by: Li Shengnan, et al.
Published: (2021-03-01)

Studies On Momentum, Heat And Mass Transfer In Binary Alloy Solidification Processes
by: Chakraborty, Suman
Published: (2007)

Effect of Laser Welding Process Parameters and Filler Metals on the Weldability and the Mechanical Properties of AA7020 Aluminium Alloy
by: Saheed B. Adisa, et al.
Published: (2018-06-01)

Multi-Phase Modeling Of Microporosity And Microstructures During Solidification Of Aluminum Alloys
by: Karagadde, Shyamprasad
Published: (2014)

Effect Of Mould Filling On Evolution Of Mushy Zone And Macrosegregation During Solidification
by: Pathak, Nitin
Published: (2010)

SOLIDIFICATION OF NICKEL-BASE ALLOYS CONTAINING TITANIUM AND ALUMINUM
by: Vaughn, Glen Allen
Published: (1978)

Rapid solidification of metals and alloys
by: Vitta, Satish
Published: (1987)

The Microstructural Evolution of Vacuum Brazed 1Cr18Ni9Ti Using Various Filler Metals
by: Yunxia Chen, et al.
Published: (2017-04-01)

Research Progress in Relation to Composite Brazing Materials with Flux
by: Bo Wang, et al.
Published: (2021-08-01)

Synthesis of silver/copper nanoparticles and their metalmetal bonding property
by: Kobayashi Y., et al.
Published: (2013-01-01)

Recent advances in the synthesis of copper-based nanoparticles for metal–metal bonding processes
by: Yoshio Kobayashi, et al.
Published: (2016-12-01)

Image Processing-Based Analysis of Temperature Dependent Interlayer in Brazed Fe-Cr-Al Alloy (Fecralloy<sup>®</sup>) with Ni-Based Filler Metal
by: Jeong-Heon Shin, et al.
Published: (2019-10-01)

Solidification of undercooled molten Pd-Cu-Si alloy =: 過冷熔融鈀-銅-硅合金的凝固.
Published: (1998)

Micromorphology change and microstructure of Cu-P based amorphous filler during heating process
by: Xu XiangPing, et al.
Published: (2019-02-01)

Micro-Brazing of Stainless Steel Using Ni-P Alloy Plating
by: Shubin Liu, et al.
Published: (2019-03-01)

Initial Weldability of High Entropy Alloys for High Temperature Applications
by: Martin, Alexander Charles
Published: (2019)