Modeling non-basal deformation modes in Mg-Y and other Mg-RE alloys

Modeling non-basal deformation modes in Mg-Y and other Mg-RE alloys

Bibliographic Details
Main Author:	Buey, Daniel
Language:	English
Published:	The Ohio State University / OhioLINK 2018
Subjects:	Materials Science Magnesium automotive industry aerospace industry materials science
Online Access:	http://rave.ohiolink.edu/etdc/view?acc_num=osu1532081086077038

Similar Items

ISOTHERMAL DEFORMATION AND MODELING OF Ti-6Al-4V
by: Vempati, Vamsi Krishna
Published: (2012)

Thermal Analysis, Phase Equilibria, and Superconducting Properties in MgB2 and Carbon Doped MgB2
by: Bohnenstiehl, Scot D.
Published: (2012)

STUDY OF HOT TEARING EVALUATION METHODS AND QUANTIFICATION OF CONTRACTION FORCES IN DIE CASTING ALLOYS
by: Dubey, Shri Nath
Published: (2015)

Corrosion and Passivation of Mg-Al and Ni-Cr Alloys
Published: (2018)

Novel Ternary Magnesium-Tin Alloys by Microalloying
by: Behdad, Sadegh
Published: (2015)

Precipitation in MgO.
by: Henriksen, Anders Finn
Published: (2005)

Analysis of Microstructure and Macrosegregation for Directional Solidification of Al-7 wt% Si Alloy with a Cross-Section Change at Growth Speeds of 10 and 29.1 μm/s
by: Johnson, Luke N.
Published: (2013)

MATERIAL AND ECONOMICAL ASPECT OF SOME PLASTICS USING IN AUTOMOTIVE INDUSTRY
by: Lucia Knapčíková, et al.
Published: (2016-12-01)

Deformation of semi-solid aluminium alloys
by: Han, Do-Suck
Published: (2000)

Corrosion Inhibition by Inorganic Cationic Inhibitors on the High Strength Aluminum Alloy, 2024-T3
by: Chilukuri, Anusha
Published: (2012)

Effects of Manufacturing Defects on the Corrosion of Additively Manufactured AlSi10Mg
by: Bogen, Daniel J.
Published: (2020)

Effect of Hydroxyapatite on the Mechanical Properties and Corrosion Behavior of Mg-Zn-Y Alloy
by: Chun Chiu, et al.
Published: (2017-07-01)

Wire Arc Additive Manufacturing (WAAM) of Aluminum Alloy AlMg5Mn with Energy-Reduced Gas Metal Arc Welding (GMAW)
by: Maximilian Gierth, et al.
Published: (2020-06-01)

Effects of Microstructure and Alloy Concentration on the Corrosion and Tribocorrosion Resistance of Al-Mn and WE43 Mg Alloys
by: Mraied, Hesham Y. Saleh
Published: (2017)

Structure and properties of three powder metallurgically processed Al-Cu-Mg alloys
by: Petit, Jocelyn Irene
Published: (2005)

Experimental study of consistency degradation of different greases in mixed neutron and gamma radiation
by: Matteo Ferrari, et al.
Published: (2019-09-01)

Investigating Surface Finish, Burr Formation and Tool Wear During Sustainable Machining of 3D Printed Carbon Fiber Reinforced Polymer (CFRP) Composites
by: Cococcetta, Nicholas Michael
Published: (2020)

Properties enhancement of Al-Zn-Mg alloy by retrogression and re-aging heat treatment
by: Zaid H.R., et al.
Published: (2011-01-01)

Microstructure Evolution Mechanism and Fracture Characteristic of Bimodal Size SiC<sub>p</sub>/Mg Composite
by: Mingjie Shen, et al.
Published: (2019-01-01)

Mechanical Performance and Structure-Property Relations in6061B Aluminum Metal Matrix Composites
by: Park, Conrad
Published: (2019)

Investigating and Understanding the Role of Transformation Induced Residual Stress to Increase Fatigue Life of High Strength Steel Used in Transmission Gears
by: Freborg, Andrew M.
Published: (2013)

An Understanding of the Quasi-static Behavior, High Cycle Fatigue and Final Fracture Behavior of a Titanium (Ti- 4 Al-2.5 V-1.5 Fe-0.25 O2) Alloy
by: Kuruvilla, Mithun
Published: (2008)

Thermoset recycling via high-pressure high-temperature sintering: Revisiting the effect of interchange chemistry
by: Morin, Jeremy Edward
Published: (2002)

Biomimetic Composite T-Joints
by: Thummalapalli, Vimal Kumar
Published: (2011)

An investigation of fretting wear in aerospace applications
by: Nortje, Hermann
Published: (2011)

Effect of Li Addition on the Plasticity of AZ31 Mg-Alloy
by: Govind, *
Published: (2017)

EXPERIMENTAL VALIDATION OF THE CALPHAD APPROACH APPLIED TO MULTI-PRINCIPLE ELEMENT ALLOYS
by: Bryant, Nathan J.
Published: (2015)

The Influence of MgH2 on the Assessment of Electrochemical Data to Predict the Degradation Rate of Mg and Mg Alloys
by: Wolf-Dieter Mueller, et al.
Published: (2014-06-01)

Diffusion study of Mg-based alloys: an experimental and modeling approach
by: Das, Sazol
Published: (2014)

Sintering and reactions MgO and Cr₂O₃ /
by: Hench, Larry L.
Published: (1964)

Development of Mg-Al-Sn and Mg-Al-Sn-Si Alloys and Optimization of Super Vacuum Die Casting Process for Lightweight Applications
by: Klarner, Andrew Daniel
Published: (2018)

Dependence of Microstructure Evolution, Texture, and Mechanical Behavior of A Mg Alloy on Thermo-Mechanical Input during Friction Stir Processing
by: Yu, Zhenzhen
Published: (2010)

Assessing Blockchain Investments through the Learning Option: An Application to the Automotive and Aerospace Industry
by: Ana María Sánchez Pérez, et al.
Published: (2020-12-01)

A novel biodegradable Mg-1Zn-0.5Sn alloy: Mechanical properties, corrosion behavior, biocompatibility, and antibacterial activity
by: Weikang Zhao, et al.
Published: (2020-06-01)

Properties of Mixing SAC Solder Alloys with Bismuthcontaining Solder Alloys for a Low Reflow Temperature Process
by: Swanson, Tayler John
Published: (2019)

Experiments on the High-Power and High-Temperature Performance of Gear Contacts
by: Olson, Garrett Weston
Published: (2012)

Microstructural development in Mg alloys during solidification: an experimental and modeling study
by: Paliwal, Manas
Published: (2014)

Improvements to Constitutive Material Model for Fabrics
Published: (2011)

Corrosion Behavior of Automotive Al-Mg-Si Alloys and Assessment of the Ability of Accelerated Corrosion Tests to Predict On-road Corrosion of these Alloys
by: Zhang, Dadi
Published: (2020)

Corrosion Resistance Assessment of Pretreated Magnesium Alloys
by: Chen, Xi
Published: (2010)