Conception and development of improved analytical prediction models for fatigue induced tooth breakage due to cyclic bending in spur gear teeth /

Conception and development of improved analytical prediction models for fatigue induced tooth breakage due to cyclic bending in spur gear teeth /

Bibliographic Details
Main Author:	Daniewicz, Steven R.
Language:	English
Published:	The Ohio State University / OhioLINK 1991
Subjects:	Education
Online Access:	http://rave.ohiolink.edu/etdc/view?acc_num=osu1487687959968335

Similar Items

Conception and development of improved analytical prediction models for fatigue induced tooth breakage due to cyclic bending in spur gear teeth
by: Daniewicz, Steve
Published: (1991)

DEVELOPMENT OF AN EXPERIMENTAL METHODOLOGY FOR SINGLETOOTH BENDING FATIGUE EVALUATION OF SPUR GEARS
by: Srinivasan, Aravind
Published: (2020)

Tooth Root Bending Fatigue Strength of High-Density Sintered Small-Module Spur Gears: The Effect of Porosity and Microstructure
by: Vigilio Fontanari, et al.
Published: (2019-05-01)

Dynamic loads on spur gear teeth.
by: Yeh, Benjamin Hsi-Lu
Published: (2011)

Evaluation of Spur Gear Pair on Tooth Root Bending Stress in Radial Misalignment Contact Condition
by: Lias M.R., et al.
Published: (2014-07-01)

Deformation and stiffness of spur gear teeth and their influence on gear noise
by: Silvia MEDVECKÁ-BEŇOVÁ
Published: (2015-12-01)

An investigation of the dynamic loads in spur-gear teeth
by: Howland, John S
Published: (2005)

The measurement of static deflections in spur gear teeth
by: Furrow, Roger Wayne
Published: (2020)

Tooth Surface Failure of Straight Spur Gears
by: Nadano, Hiromasa
Published: (2017)

Spur Gear Tooth Topology Optimization: Finding Optimal Shell Thickness for Spur Gear Tooth produced using Additive Manufacturing
by: Adis J. Muminovic, et al.
Published: (2019-08-01)

The role of pores and microstructural heterogeneity on the tooth root fatigue strength of sintered spur gears
by: Benedetti Matteo, et al.
Published: (2018-01-01)

Real contact ratio and tooth bending stress calculation for plastic/plastic and plastic/steel spur gears
by: Jabbour Toni, et al.
Published: (2021-01-01)

Research on the problem of spur gear teeth contact in the car gear box
by: Viktor Skrickij
Published: (2010-12-01)

A study of parametric tooth profiles for spur gears and bevel gears
by: ZHANG,HUI-LONG, et al.
Published: (1991)

Investigating bending strength of spur gear: A review
by: Abdul Aziz Ismail Ali, et al.
Published: (2017-01-01)

Dimensioning and Geometrical Modeling of Spur Gears with Asymmetric Teeth
by: Editörden
Published: (2004-04-01)

A study of friction loss for spur gear teeth.
by: Tso, Lu-nien
Published: (2012)

Optimization of Tooth Root Profile Using Bezier Curve with G2 Continuity to Reduce Bending Stress of Asymmetric Spur Gear Tooth
by: Vaghela Priyakant, et al.
Published: (2018-01-01)

Tooth contact analysis of spur gears. Part 2-Analysis of modified gears
by: Pop Nicolae, et al.
Published: (2017-01-01)

EFFECT OF ASYMMETRY ON RADII OF CURVATURE FOR SPUR GEARS WITH NONSYMMETRICAL TEETH
by: Jarmila VOJTKOVÁ
Published: (2014-09-01)

AUTOMATING THE MODELLING PROCESS OF INVOLUTE SPUR GEARS WITH STRAIGHT TEETH
by: Tadeusz Markowski, et al.
Published: (2013-09-01)

A study of dynamic loads on straight spur gear teeth.
by: Umberger, Paul Jay
Published: (2012)

The study of oil films between the teeth of running spur gears
by: Ibrahim, Muhammad
Published: (1962)

Power loss analysis in altered tooth-sum spur gearing
by: Sachidananda H. K., et al.
Published: (2018-01-01)

Power loss analysis in altered tooth-sum spur gearing
by: Sachidananda H. K., et al.
Published: (2018-01-01)

A Mathematical Model for Parametric Tooth Profile of Spur Gears
by: Guodong Zhai, et al.
Published: (2020-01-01)

EFFECT OF RIM THICKNESS ON THE ROOT STRESSES OF SPUR GEAR TOOTH
by: Durmuş GÜNAY, et al.
Published: (1997-01-01)

Tooth contact analysis of spur gears. Part 1-SAM analysis of standard gears
by: Creţu Spiridon, et al.
Published: (2017-01-01)

Gear Root Bending Strength: A New Multiaxial Approach to Translate the Results of Single Tooth Bending Fatigue Tests to Meshing Gears
by: Franco Concli, et al.
Published: (2021-05-01)

Stress tension and deformation study in teeth of a cylindrical spur gears
by: Costică Hogaș, et al.
Published: (2016-12-01)

CALCULATION OF THE STRESSES ON THE WORKING SURFACE OF THE TEETHES OF OBLIQUE ANGLE SPUR GEARS
by: Yu V Belousov
Published: (2015-08-01)

Characteristic study and analysis of internal spur gears with crowned pinion teeth
by: CHEN, ZHENG-YU, et al.
Published: (1989)

A finite element analysis of pinion shaped spur gear teeth
by: Rhomberg, Edward W.
Published: (2019)

A photoelastic study of stress distribution in a spur gear tooth
by: Wang, Kuo Chang, 1924-
Published: (2014)

Spur Gears Static and Dynamic Meshing Simulation and Tooth Stress Calculation
by: Jammal Ali, et al.
Published: (2015-01-01)

Study on stress intensity factors for crack on involute spur gear tooth
by: Jian Cai, et al.
Published: (2015-03-01)

Tribological behavior of coated spur gear pairs with tooth surface roughness
by: Huaiju Liu, et al.
Published: (2018-01-01)

AN EXPERIMENTAL INVESTIGATION ON THE INFLUENCE OF TENSILE MEAN STRESS ON GEAR TOOTH BENDING FATIGUE LIFE
by: Teaford, Zachary Dean
Published: (2020)

Determination of Service Life of Sintered Powder Metallurgy Gears in Regard to Tooth Bending Fatigue
by: Marko Šori, et al.
Published: (2018-01-01)

A parametric study of frictional load influence in spur gear bending resistance
by: Osakue Edward E., et al.
Published: (2020-01-01)