Weldability Evaluation in Autogenous Welds of Alloys 230, 800H, and 825

Weldability Evaluation in Autogenous Welds of Alloys 230, 800H, and 825

Bibliographic Details
Main Author:	Suh, Sanghyun
Language:	English
Published:	The Ohio State University / OhioLINK 2016
Subjects:	Metallurgy Materials Science solidification cracking hot cracking cast pin tear test ss-dta thermo-calc stress relief cracking gleeble nickel based alloys ni based alloys autogenous weld tensile test characterization
Online Access:	http://rave.ohiolink.edu/etdc/view?acc_num=osu1471581194

Similar Items

Investigation of Weldability in High-Cr Ni-base Filler Metals
by: Luskin, Timothy Clark
Published: (2013)

Effect of Interstitial Elements on the Weldability of Ni-base Alloys
by: Aguilar, Louie
Published: (2019)

Development of a gleeble based test for post weld heat treatment cracking in nickel alloys
by: Norton, Seth J.
Published: (2003)

Evaluation and Observation of Autogenous Healing Ability of Bond Cracks along Rebar
by: Choonghyun Kang, et al.
Published: (2014-04-01)

AUTOGENOUS HEALING PROPERTIES OF CONCRETE UNDER FLEXURAL LOADING
by: NAKAMURA, Hikaru, et al.
Published: (2011)

Solidification Cracking Performance and Metallurgical Analysis of Filler Metal 82
by: Orr, Michael Romanoff
Published: (2016)

Autogenous Shrinkage and Crack Resistance of Carbon Nanotubes Reinforced Cement-Based Materials
by: Yanming Liu, et al.
Published: (2020-08-01)

Eutectic Backfilling: A Fundamental Investigation into Compositional Effects on the Nature of this Crack Healing Phenomenon for Ni-30Cr Weld Applications
by: Wheeling, Rebecca Ann
Published: (2018)

Calibration of Steel Rings for the Measurement of Strain and Shrinkage Stress for Cement-Based Composites
by: Adam Zieliński, et al.
Published: (2020-07-01)

Development of a High Chromium Ni-Base Filler Metal Resistant to Ductility Dip Cracking and Solidification Cracking
by: Hope, Adam T., Hope
Published: (2016)

Mechanisms of Cracking in Laser Welding of Magnesium Alloy AZ91D
by: Wei Zhou, et al.
Published: (2021-07-01)

Influence of Alloy Elements on Cracking in the Steel Ingot during Its Solidification
by: Junli Guo, et al.
Published: (2019-07-01)

CRACK TESTING FOR BRAZED ALUMINIUM ALLOYS SPECIMENS
by: Dan NITOI
Published: (2014-05-01)

An investigation of the elevated temperature cracking susceptibility of alloy C-22 weld-metal
by: Gallagher, Morgan Leo
Published: (2008)

Concrete Early-Age Crack Closing by Autogenous Healing
by: Marta Roig-Flores, et al.
Published: (2020-06-01)

Numerical Alloy Development for Additive Manufacturing towards Reduced Cracking Susceptibility
by: Benjamin Wahlmann, et al.
Published: (2021-07-01)

The role of the pulsed-wave laser characteristics on restraining hot cracking in laser cladding non-weldable nickel-based superalloy
by: Zhenlin Zhang, et al.
Published: (2021-01-01)

Cracking susceptibility of aluminum alloys during laser welding
by: Lara Abbaschian, et al.
Published: (2003-06-01)

Liquation Cracking Tendency of Novel Al-Mg-Zn Alloys with a Zn/Mg Ratio below 1.0 during Fusion Welding
by: Di Zhang, et al.
Published: (2020-02-01)

A New Test Method for Evaluation of Solidification Cracking Susceptibility of Stainless Steel during Laser Welding
by: Wenbin Wang, et al.
Published: (2020-07-01)

Micro alloyed steel weldability and sensibility testing on the lamellar cracks appearance
by: S. Stojadinović, et al.
Published: (2011-07-01)

Weldability Evaluation of Alloy 718 Investment Castings with Different Si Contents and Thermal Stories and Hot Cracking Mechanism in Their Laser Beam Welds
by: Pedro Álvarez, et al.
Published: (2021-03-01)

Underwater In Situ Local Heat Treatment by Additional Stitches for Improving the Weldability of Steel
by: Jacek Tomków, et al.
Published: (2020-03-01)

Application of a Novel Chamfered Mold to Suppress Corner Transverse Cracking of Micro-Alloyed Steel Slabs
by: Guoliang Liu, et al.
Published: (2020-09-01)

Modélisation de la fissuration à chaud lors du soudage de l'alliage base nickel IN600
by: Bouffier, Lionel
Published: (2013)

Subcritical crack growth in zirconium alloys
by: ANDRADE, ARNALDO H.P.
Published: (1982)

Subcritical crack growth in zirconium alloys
by: ANDRADE, ARNALDO H.P.
Published: (1982)

Prediction of Cracking Susceptibility of Commercial Aluminum Alloys during Solidification
by: Fan Zhang, et al.
Published: (2021-09-01)

Predicting Susceptibility to Solidification Cracking and Liquation Cracking by CALPHAD
by: Sindo Kou
Published: (2021-09-01)

Identification of Relationships between Heat Treatment and Fatigue Crack Growth of αβ Titanium Alloys
by: Vincent Renon, et al.
Published: (2019-04-01)

Mg and Its Alloys for Biomedical Applications: Exploring Corrosion and Its Interplay with Mechanical Failure
by: Mirco Peron, et al.
Published: (2017-07-01)

Characterization of Surface Fatigue Crack Nucleation and Microstructurally Small Crack Growth in High Strength Aluminum Alloys
by: Robert Fleishel, et al.
Published: (2021-02-01)

Evaluation of the Effect of Tungsten and Boron Additions on the Microstructure and Solidification Cracking Susceptibility of Fe-Mn-C Filler Metals
by: Lenzo, Jansen C., Lenzo
Published: (2016)

Heat-Affected-Zone Liquation Cracking in Welded Cast Haynes<sup>®</sup> 282<sup>®</sup>
by: Sukhdeep Singh, et al.
Published: (2019-12-01)

Fatigue cracking of aluminium alloy AlZn6Mg0.8Zr subjected to thermomechanical treatment
by: A. Kowalski, et al.
Published: (2016-02-01)

Solidification path calculations of Al-Zn-Mg alloys in Al-rich corner
by: Guang-wei Zhao, et al.
Published: (2017-11-01)

Effect of 0.8 at.% H on the Mechanical Properties and Microstructure Evolution of a Ti–45Al–9Nb Alloy Under Uniaxial Tension at High Temperature
by: Qiqi Yu, et al.
Published: (2020-01-01)

Investigation of Stress Corrosion Cracking in Magnesium Alloys by Quantitative Fractography Methods
by: Sozańska M., et al.
Published: (2017-06-01)

Fatigue studies in Al-Mg-Si alloys
by: Guengoeor, Salih
Published: (1990)

Stable crack growth in an aluminium-silicon bronze alloy
by: Phoplonker, M. A.
Published: (1987)