In Vitro Fit and Distortion of CAD/CAM-Fabricated Implant-Fixed Titanium and Zirconia Complete Dental Prostheses Frameworks

In Vitro Fit and Distortion of CAD/CAM-Fabricated Implant-Fixed Titanium and Zirconia Complete Dental Prostheses Frameworks

Bibliographic Details
Main Author:	AL-Meraikhi, Hadi Nasser
Language:	English
Published:	The Ohio State University / OhioLINK 2015
Subjects:	Dentistry
Online Access:	http://rave.ohiolink.edu/etdc/view?acc_num=osu1449063197

Similar Items

Influence of Sequential CAD/CAM Milling on the Fitting Accuracy of Titanium Three-Unit Fixed Dental Prostheses
by: Du-Bin Song, et al.
Published: (2021-03-01)

Comparison of clinical fit of three-unit zirconia fixed prostheses fabricated using chairside and labside CAD/CAM systems
by: Jong-Ju Ahn, et al.
Published: (2020-06-01)

Marginal and Internal Fit of Ceramic Prostheses Fabricated from Different Chairside CAD/CAM Systems: An in Vitro Study
by: Keunbada Son, et al.
Published: (2021-01-01)

Mechanical Properties of Selected CAD/CAM and Conventional Interim Fixed Restorative Materials
by: Alzahrani, Abdulrahman Hassan
Published: (2018)

Prosthetic Complications in Mandibular Fixed-Removable Implant Prostheses Opposed by Complete Dentures: A 5-9 years Analysis
by: Purcell, Bradley Allen
Published: (2005)

A Comparison Study of Marginal and Internal Fit Assessment Methods for Fixed Dental Prostheses
by: Keunbada Son, et al.
Published: (2019-06-01)

Comparison of the accuracy of fit of CAD/CAM crowns using three different data acquisition methods
by: Jokhadar, Hossam
Published: (2013)

CAD/CAM veneers: effect of material and thickness on color masking, bond strength and marginal fit
by: AlDeeb, Laila
Published: (2018)

An evaluation of accuracy of three-unit fixed prostheses using dental CAD/CAM and digital scanning technology
by: Chen-Ya Yang, et al.
Published: (2016)

Health Technology Assessment of CAD/CAM in Dentistry
by: Mohammadreza Mobinizadeh, et al.
Published: (2014-06-01)

Modeling of the Influence of Chemical Composition, Sintering Temperature, Density, and Thickness in the Light Transmittance of Four Zirconia Dental Prostheses
by: Yuri Resende Fonseca, et al.
Published: (2019-08-01)

Marginal and internal fit of zirconia based fixed dental prostheses fabricated with different concepts
by: Florian Beuer, et al.
Published: (2010-02-01)

MILLING MACHINES TOOLS USED IN CAD-CAM TECHNOLOGY OF DENTAL PROSTHESES
by: Alexandru Andrei Iliescu, et al.
Published: (2019-01-01)

Failure load of CAD/CAM-generated all ceramic posterior endocrowns
by: Salah, Fadhela
Published: (2018)

Retentive strength at the zirconia implant abutment and titanium base interface with different surface treatments
by: Arce, Celin
Published: (2016)

Implant-supported zirconia-based fixed dental prostheses - a literature review
by: Fransson, Hannah
Published: (2014)

CAD/CAM-menetelmällä valmistetut suun ulkopuoliset täytteet:preparointiperiaatteet, materiaalit ja saumatiiviys
by: Suopajärvi, V.-P. (Veli-Pekka)
Published: (2019)

Treatment outcome of zirconia single crowns and fixed dental prostheses
by: Pihlaja, J. (Juha)
Published: (2016)

Comparison of peri-implant submucosal microbiota in arches with zirconia or titanium implant-supported fixed complete dental prostheses: a study protocol for a randomized controlled trial
by: Pingyi Jia, et al.
Published: (2020-11-01)

Mechanical properties of CAD/CAM fabricated esthetic orthodontic brackets and introduction of extremely low profile miniature zirconia and shaded brackets
by: Alrejaye, Najla
Published: (2016)

A Study of Cutting Parameter on Dental Zirconia for CAD/CAM application
by: LO, AN-JIE, et al.
Published: (2017)

Comparison of Load-to-Fracture Values and Fracture Characterization of Monolithic Zirconia, Lithium Disilicate, and Zirconia-Reinforced Lithium Silicate Glass-Ceramic CAD/CAM Crowns
by: Kashkari, Afnan
Published: (2016)

Tooth-Colored CAD/CAM Materials for Application in 3-Unit Fixed Dental Prostheses in the Molar Area: An Illustrated Clinical Comparison
by: Angelika Rauch, et al.
Published: (2020-12-01)

Clinical Performance of CAD/CAM All-Ceramic Tooth-Supported Fixed Dental Prostheses: A Systematic Review and Meta-Analysis
by: Babak Saravi, et al.
Published: (2021-05-01)

Critical review about two myths in fixed dental prostheses: Full-Coverage vs. Resin-Bonded, non-Cantilever vs. Cantilever
by: Atsushi Mine, et al.
Published: (2021-11-01)

A systematic review on the accuracy of zirconia crowns and fixed dental prostheses
by: Per Svanborg
Published: (2020-01-01)

Marginal and Internal Fit of CAD/CAM and Slip-Cast Made Zirconia Copings
by: Kianoosh Torabi Ardekani, et al.
Published: (2012-04-01)

Bond strength between veneer porcelains and CAD/CAM ceramic to CP titanium and evaluation of fracture load and effect of aging on low fusing porcelain fired over CP TI and CAD / CAM materials cemented onto CP TI
by: Hifeda, Nedda
Published: (2016)

The Effect of Cyclic Loading on the Zirconia/Titanium Implant Abutment Interface and the Mechanism of Failure between Three Different Types of Abutments
by: Mascarenhas, Faye
Published: (2015)

Digital Dentistry — Digital Impression and CAD/CAM System Applications
by: Gabor Alin-Gabriel, et al.
Published: (2017-03-01)

Properties and Clinical Application of Three Types of Dental Glass-Ceramics and Ceramics for CAD-CAM Technologies
by: Christian Ritzberger, et al.
Published: (2010-06-01)

The effects of machining on the flexural strength of CAD-CAM materials
by: Al-Ayoub, Ghassan
Published: (2016)

Introduction of novel CAD/CAM fabricated esthetic interprenetrating phase ceramic orthodontic brackets; fracture and frictional resistance evaluation
by: Alrejaye, Hessa Sulaiman A.
Published: (2021)

An in vitro evaluation of marginal fit zirconia crowns fabricated by a CAD-CAM dental laboratory and a milling center
by: Avi Meirowitz, et al.
Published: (2019-06-01)

Technical and Biological Complications of Screw-Retained (CAD/CAM) Monolithic and Partial Veneer Zirconia for Fixed Dental Prostheses on Posterior Implants Using a Digital Workflow: A 3-Year Cross-Sectional Retrospective Study
by: Paolo De Angelis, et al.
Published: (2021-01-01)

Clinical advantages of cad-cam-fabricated full-arch ﬁxed implant-supported monolithic zirconia dental prosthesis with digital modelling of the occlusion surfaces
by: R. A. Rozov, et al.
Published: (2018-09-01)

Retention Forces of Monolithic CAD/CAM Crowns Adhesively Cemented to Titanium Base Abutments—Effect of Saliva Contamination Followed by Cleaning of the Titanium Bond Surface
by: Felix Burkhardt, et al.
Published: (2021-06-01)

Implant Supported Fixed Dental Prostheses Using a New Monotype Zirconia Implant—A Case Report
by: Stefan Roehling, et al.
Published: (2015-09-01)

Clinical performance of CAD/CAM fabricated complete dentures; A retrospective study and assessment of patient satisfaction
by: Saponaro, Paola Cristina
Published: (2015)

Influence of Milling Tool and Prosthetic Materials on Roughness of the Dental CAD CAM Prostheses in End Milling Mode
by: Nicolas Lebon, et al.
Published: (2020-03-01)