Investigation of Mold Design and Process Parameters in Microinjection Molding to Fabricate a Deformable Membrane Mirror

Investigation of Mold Design and Process Parameters in Microinjection Molding to Fabricate a Deformable Membrane Mirror

Bibliographic Details
Main Author:	El-Taleb, Ahmed Salem
Language:	English
Published:	The Ohio State University / OhioLINK 2013
Subjects:	Industrial Engineering Polymers Microinjection molding mold design microchannel deformable membrane mirror process parameters
Online Access:	http://rave.ohiolink.edu/etdc/view?acc_num=osu1376610533

Similar Items

Crystallization and Microstructure Evolution of Microinjection Molded Isotactic Polypropylene with the Assistance of Poly(Ethylene Terephthalate)
by: Zhongguo Zhao, et al.
Published: (2020-01-01)

Effect of Micro-Mold Cavity Dimension on Structure andProperty of Polylactic Acid/Polycaprolactone Blend underMicroinjection Molding Conditions
by: Meng Wang, et al.
Published: (2021-03-01)

Microinjection Molding of Out-of-Plane Bistable Mechanisms
by: Wook-Bae Kim, et al.
Published: (2020-01-01)

Predicting the location of weld line in microinjection-molded polyethylene via molecular orientation distribution
by: Liao, T., et al.
Published: (2020)

Effect of Hybrid Carbon Fillers on the Electrical and Morphological Properties of Polystyrene Nanocomposites in Microinjection Molding
by: Shengtai Zhou, et al.
Published: (2018-09-01)

Structure and Property of Microinjection Molded Poly(lactic acid) with High Degree of Long Chain Branching
by: Zhao, Z.-G., et al.
Published: (2019)

Fabrication of Different Microchannels by Adjusting the Extrusion Parameters for Sacrificial Molds
by: Wenlai Tang, et al.
Published: (2019-08-01)

Characterization of Microchannel Replicability of Injection Molded Electrophoresis Microfluidic Chips
by: Bingyan Jiang, et al.
Published: (2019-04-01)

Extrusion blow molding : process dynamics and product properties
by: Kalyon, Dilhan
Published: (1980)

INVESTIGATION OF THE INFLUENCE OF MOLD ROTATIONAL SPEED ON THE CAST WALL THICKNESS IN THE ROTATIONAL MOLDING PROCESS
by: Tomasz Jachowicz, et al.
Published: (2013-09-01)

Study on Effects of Mold Temperature on the Injection Molded Article
by: Han J.-H., et al.
Published: (2017-06-01)

Fabrication and analysis of injection molded plastic microneedle arrays
by: Hamilton, Jordan David
Published: (2011)

Efficient and Precise Micro-Injection Molding of Micro-Structured Polymer Parts Using Micro-Machined Mold Core by WEDM
by: Qianghua Liao, et al.
Published: (2019-09-01)

Influence of Heat Sink on the Mold Temperature of Gypsum Mold Used in Injection Molding
by: Chung-Chih Lin, et al.
Published: (2020-03-01)

Comparison and Analysis on Cavity Pressure of Conventional Injection Molding and Injection Compression Molding
by: WANG Tao, et al.
Published: (2018-04-01)

Ultrasonic Molding Technology: Recent Advances and Potential Applications in the Medical Industry
by: Ulisses Heredia-Rivera, et al.
Published: (2019-04-01)

Dual Sacrificial Molding: Fabricating 3D Microchannels with Overhang and Helical Features
by: Wei Huang Goh, et al.
Published: (2018-10-01)

Micro Injection Molding of Thin Cavities Using Stereolithography for Mold Fabrication
by: Rossella Surace, et al.
Published: (2021-06-01)

Effects of the Processing Parameters on the Shear Viscosity of Cyclic Olefin Copolymer Plasticized by Ultrasonic Vibration Energy
by: Jin Lu, et al.
Published: (2020-03-01)

Fabrication of Functional Plastic Parts Using Nanostructured Steel Mold Inserts
by: Nicolas Blondiaux, et al.
Published: (2017-06-01)

Multi-Objective Optimizations of Biodegradable Polymer Stent Structure and Stent Microinjection Molding Process
by: Hongxia Li, et al.
Published: (2017-01-01)

Injection Compression Molding of Replica Molds for Nanoimprint Lithography
by: Keisuke Nagato
Published: (2014-03-01)

The design, fabrication and development of a compression mold to beused in conjection with the molding of synthetic thermosetting materials on the Carver Laboratory Press
by: Reynard, Chauncy Gordon
Published: (2011)

Association of molds and metrological parameters to frequency of severe asthma exacerbation
by: Mona Al-Ahmad, et al.
Published: (2019-04-01)

A study on material distribution, mechanical properties, and numerical simulation in co-injection molding
by: Srithep, Yottha
Published: (2008)

Review of the Numerical Modeling of Compression Molding of Sheet Molding Compound
by: Gustaf Alnersson, et al.
Published: (2020-02-01)

Structural analysis of thick polypropylene moldings
by: Shindo, Nobuhiko
Published: (2006)

Comparison of culturable/viable airborne mold and total mold spore sampling results in single-family dwellings
by: Russell, Carrie L.
Published: (2011)

Polypropylene/talc foams with high weight-reduction and improved surface quality fabricated by mold-opening microcellular injection molding
by: Junji Hou, et al.
Published: (2021-05-01)

Replicability of Ultrasonic Molding for Processing Thin-Wall Polystyrene Plates with a Microchannel
by: I. Ferrer, et al.
Published: (2018-07-01)

Hierarchical Structure of iPP During Injection Molding Process with Fast Mold Temperature Evolution
by: Vito Speranza, et al.
Published: (2019-01-01)

Diagnosis parameters of mold filling pattern for optimization of a casting system
by: Jun-Ho Hong, et al.
Published: (2012-11-01)

Ejection force modeling for stereolithography injection molding tools
by: Pham, Giang T.
Published: (2007)

Modeling the replication of submicron-structured surfaces by micro injection molding
by: Leonardo Piccolo, et al.
Published: (2021-01-01)

In-Mold Sensors for Injection Molding: On the Way to Industry 4.0
by: Tatyana Ageyeva, et al.
Published: (2019-08-01)

Modeling Sticking Force in Compression Glass Molding Systems
by: Fischbach, Kyle David
Published: (2010)

Characterization of Polymeric Binders for Metal Injection Molding (MIM) Process
by: Adames, Juan M.
Published: (2007)

Simulation of casting deformation based on mold surface element method
by: Tao Chen, et al.
Published: (2017-01-01)

An investigation of the transfer molding process
by: Frimenko, Jacob
Published: (2011)

A Combined In-Mold Decoration and Microcellular Injection Molding Method for Preparing Foamed Products with Improved Surface Appearance
by: Wei Guo, et al.
Published: (2019-05-01)