Plasma Assisted Combustion and Flameholding in High Speed Cavity Flows
| Main Author: | |
|---|---|
| Language: | English |
| Published: |
The Ohio State University / OhioLINK
2012
|
| Subjects: | |
| Online Access: | http://rave.ohiolink.edu/etdc/view?acc_num=osu1343838199 |
| id |
ndltd-OhioLink-oai-etd.ohiolink.edu-osu1343838199 |
|---|---|
| record_format |
oai_dc |
| spelling |
ndltd-OhioLink-oai-etd.ohiolink.edu-osu13438381992021-08-03T06:06:17Z Plasma Assisted Combustion and Flameholding in High Speed Cavity Flows Heinrichs, Joseph Aloysius Mechanical Engineering plasma assisted combustion plasma assisted ignition nonequilibrium plasma temperature plasma cavity ignition cavity flameholding This thesis presents an experimental study of non-equilibrium, low temperature, large volume plasma assisted ignition and flameholding in high-speed, non-premixed fuel-air flows. The plasma is produced between two electrodes powered by a high-voltage, nanosecond pulse generator operated at a high pulse repetition rate. Ignition in this type of plasma occurs due to production of highly reactive radicals by electron impact excitation and dissociation, as opposed to more common thermal ignition. Previously, it has been shown that this type of plasma can reduce ignition delay time and ignition temperature. The experiments performed in this thesis focus on application of these plasmas to ignition, and flameholding in high-speed cavity flows. The experiments discussed in this thesis continue previous work using a high-speed combustion test section with a larger cavity, and the previous results are compared to the present work. Several modifications have been made to the test section and electrodes compared to the design used in previous work in order to reduce the cavity effect on the main flow and maintain diffuse plasma between the electrodes in the cavity.The electrodes used in these experiments are placed in a cavity recess, used to create a recirculation flow region with long residence time, where ignition and flameholding can occur. In order to analyze the nanosecond pulse plasma and the flame, various diagnostics were used, including current and voltage measurements, UV emission measurements, ICCD camera imaging, static pressure measurements, and time-averaged emission spectroscopy.The experiments in this thesis were performed at relatively low pressures (P=150-200 torr) using hydrogen and ethylene fuels injected into the cavity. Current and voltage measurements showed that ~1-2 mJ was coupled to the plasma by each pulse. ICCD imaging and UV emission data revealed that the plasma sustained in quiescent air was diffuse. When ethylene was injected into the cavity to ignite the flow, ICCD imaging and UV emission data showed arcing to bare metal surfaces in the test section occurred shortly after ignition, which prompted switching to hydrogen fuel. Using hydrogen, ICCD imaging and UV emission showed that the plasma remained diffuse and confined to the area between electrodes. Time-average emission spectroscopy measurements revealed that the air-flow temperature remained low until fuel was injected and ignition occurred. Pressure and UV emission measurements were used to find velocity limits within which the flow ignited. It was found that the upper limit of velocity depends strongly on the static pressure in the test section. The highest flow velocity at which combustion was achieved in H2-air flows was 270 m/s at 180 torr. This represents considerable improvement compared to previous work using nanosecond pulse discharge for ignition in cavities.Preliminary results show that plasma generation and ignition are possible using a smaller diameter electrode such that the cavity size can be further reduced, and that a supersonic flow can be produced in the present test section using a Mach 2 nozzle placed upstream of the cavity. The appendix details a study on the production of oxygen atoms using a pulsed excimer laser. 2012-08-29 English text The Ohio State University / OhioLINK http://rave.ohiolink.edu/etdc/view?acc_num=osu1343838199 http://rave.ohiolink.edu/etdc/view?acc_num=osu1343838199 unrestricted This thesis or dissertation is protected by copyright: all rights reserved. It may not be copied or redistributed beyond the terms of applicable copyright laws. |
| collection |
NDLTD |
| language |
English |
| sources |
NDLTD |
| topic |
Mechanical Engineering plasma assisted combustion plasma assisted ignition nonequilibrium plasma temperature plasma cavity ignition cavity flameholding |
| spellingShingle |
Mechanical Engineering plasma assisted combustion plasma assisted ignition nonequilibrium plasma temperature plasma cavity ignition cavity flameholding Heinrichs, Joseph Aloysius Plasma Assisted Combustion and Flameholding in High Speed Cavity Flows |
| author |
Heinrichs, Joseph Aloysius |
| author_facet |
Heinrichs, Joseph Aloysius |
| author_sort |
Heinrichs, Joseph Aloysius |
| title |
Plasma Assisted Combustion and Flameholding in High Speed Cavity Flows |
| title_short |
Plasma Assisted Combustion and Flameholding in High Speed Cavity Flows |
| title_full |
Plasma Assisted Combustion and Flameholding in High Speed Cavity Flows |
| title_fullStr |
Plasma Assisted Combustion and Flameholding in High Speed Cavity Flows |
| title_full_unstemmed |
Plasma Assisted Combustion and Flameholding in High Speed Cavity Flows |
| title_sort |
plasma assisted combustion and flameholding in high speed cavity flows |
| publisher |
The Ohio State University / OhioLINK |
| publishDate |
2012 |
| url |
http://rave.ohiolink.edu/etdc/view?acc_num=osu1343838199 |
| work_keys_str_mv |
AT heinrichsjosephaloysius plasmaassistedcombustionandflameholdinginhighspeedcavityflows |
| _version_ |
1719430953915383808 |