The Effect of Particle Size and Film Cooling on Nozzle Guide Vane Deposition

The Effect of Particle Size and Film Cooling on Nozzle Guide Vane Deposition

Bibliographic Details
Main Author:	Webb, Joshua J.
Language:	English
Published:	The Ohio State University / OhioLINK 2011
Subjects:	Aerospace Engineering Alternative Energy Engineering Experiments Deposition Film Cooling Roughness Stokes Number
Online Access:	http://rave.ohiolink.edu/etdc/view?acc_num=osu1313528110

Similar Items

The Effect of Film Cooling on Nozzle Guide Vane Ash Deposition
by: Bonilla, Carlos Humberto
Published: (2012)

Investigation of cooling performance degradation of impingement/effusion structure on pressure side of nozzle guide vane
by: Cha, H., et al.
Published: (2022)

Particle Deposition in the Vicinity of Multiple Film Cooling Holes
by: He, J., et al.
Published: (2022)

Investigating the Physics and Performance of Reverse-Oriented Film Cooling
by: Prenter, Robin Michael Patrick
Published: (2017)

Nozzle Guide Vane Sweeping Jet Impingement Cooling
by: Agricola, Lucas
Published: (2018)

Numerical research on the particle transport and deposition in the impingement-film cooling passage
by: Chen, W., et al.
Published: (2023)

The Effects of Particle Size, Chemical Composition and Temperature on Deposition in an Impingement Cooling Scheme
by: Clum, Carey G., III
Published: (2013)

Step Misaligned and Film Cooled Nozzle Guide Vanes at Transonic Conditions: Heat Transfer
by: Luehr, Luke Emerson
Published: (2018)

A Detailed Study of Fan-Shaped Film-Cooling for a Nozzle Guide Vane for an Industrial Gas Turbine
by: Colban, William F. IV
Published: (2014)

Experimental Testing of Deposition Relevant to Turbine Cooling Geometries in order to Improve the OSU Deposition Model
by: Libertowski, Nathan D.
Published: (2019)

Infrared Thermography Technique for Measuring Heat Transfer to a Film Cooled Object
by: Chen, Liang
Published: (2016)

Aerodynamic Loss Co-Relations and Flow- Field Investigations of a Transonic Film- Cooled Nozzle Guide Vane
by: Leung, Pak Wing
Published: (2015)

A Study of Blockage due to Ingested Airborne Particulate in a Simulated Double-Wall Turbine Internal Cooling Passage
by: Peterson, Blair A.
Published: (2015)

Syngas ash deposition for a three row film cooled leading edge turbine vane
by: Sreedhran, Sai Shrinivas
Published: (2017)

Dependence of Film Cooling Effectiveness on 3D Printed Cooling Holes
by: Aghasi, Paul P.
Published: (2016)

Endwall Heat Transfer and Shear Stress for a Nozzle Guide Vane with Fillets and a Leakage Interface
by: Lynch, Stephen P.
Published: (2014)

A Study of the Effects of Turning Angle on Particle Deposition in Gas Turbine Combustor Liner Effusion Cooling Holes
by: Blunt, Rory Alexander Fabian
Published: (2016)

The Effect of Density Ratio on Steep Injection Angle Purge Jet Cooling for a Converging Nozzle Guide Vane Endwall at Transonic Conditions
by: Sibold, Ridge Alexander
Published: (2021)

Improving Deposition Modeling Through an Investigation of Absolute Pressure Effects and a Novel Conjugate Mesh Morphing Framework
by: Bowen, Christopher P.
Published: (2021)

Simulation of Coal Ash Deposition on Modern Turbine Nozzle Guide Vanes
by: Barker, Brett Jordan
Published: (2010)

Chemiluminescence and High Speed Imaging of Reacting Film Cooling Layers
by: O'Neil, Alanna R.
Published: (2011)

An Enhanced Flow-Thermo-Structural Modeling and Validation for the Integrated Analysis of a Film Cooling Nozzle Guide Vane
by: Peng Guan, et al.
Published: (2019-07-01)

Modeling Deposition and Erosion of Deposits in an Impingement Cooling Jet Using Mesh-Morphing
by: Geiger, Gabriel M.
Published: (2020)

Deposition of Particulate from Coal-Derived Syngas on Gas Turbine Blades Near Film Cooling Holes
by: Ai, Weiguo
Published: (2009)

Computational and experimental study on supersonic film cooling for liquid rocket nozzle applications
by: Vijayakumar Vishnu, et al.
Published: (2015-01-01)

The Combined Influences of Film Cooling and Thermal Barrier Coatings on the Cooling Performances of a Film and Internal Cooled Vane
by: Li Shi, et al.
Published: (2020-09-01)

Heat Transfer and Film Cooling Performance on a Transonic Converging Nozzle Guide Vane Endwall With Purge Jet Cooling and Dual Cavity Slashface Leakage
by: Van Hout, Daniel Richard
Published: (2020)

Film Cooling Experiments in a Medium Duration Blowdown Facility
by: Kheniser, Issam E.
Published: (2010)

Influence of the wall roughness on a linear shear flow
by: Assoudi Redouane, et al.
Published: (2018-01-01)

Effect of Blockage Inside Holes on Film Cooling Performance on the Suction Side of a Turbine Guide Vane
by: Li, G., et al.
Published: (2022)

Numerical study of operational processes in a GOx-kerosene rocket engine with liquid film cooling
by: Evgenij A. Strokach, et al.
Published: (2020-06-01)

A review of multiphase flow and deposition effects in film-cooled gas turbines
by: Wang Jin, et al.
Published: (2018-01-01)

Numerical Study of the Effects of Thermal Barrier Coating and Turbulence Intensity on Cooling Performances of a Nozzle Guide Vane
by: Prasert Prapamonthon, et al.
Published: (2017-03-01)

Numerical study and investigation of a Gurney Flap supersonic nozzle
by: El Mellouki, Mohammed
Published: (2018)

Artificial intelligence aided design of film cooling scheme on turbine guide vane
by: Dike Li, et al.
Published: (2020-12-01)

Particle Deposition Behavior from Coal-Derived Syngas in Gas Turbines at Modern Turbine Inlet Temperatures
by: Laycock, Robert
Published: (2017)

On Film Cooling of Turbine Guide Vanes : From Experiments and CFD-Simulations to Correlation Development
by: Nadali Najafabadi, Hossein
Published: (2015)

An Experimental Investigation of High Temperature Particle Rebound and Deposition Characteristics Applicable to Gas Turbine Fouling
by: Lawrence, Michael James
Published: (2013)

Heat-Flux Measurements for a Realistic Cooling Hole Pattern and Different Flow Conditions
by: Davis, Shanon Marie
Published: (2011)

Thrust Measurements on a Rocket Nozzle Using Flow-Field Diagnostics