IMPROVEMENTS IN HOT FORGING PROCESS - USING ALTERNATIVE DIE MATERIALS AND FINITE ELEMENT ANALYSIS FOR WEAR PREDICTION AND DIE DESIGN OPTIMIZATION

IMPROVEMENTS IN HOT FORGING PROCESS - USING ALTERNATIVE DIE MATERIALS AND FINITE ELEMENT ANALYSIS FOR WEAR PREDICTION AND DIE DESIGN OPTIMIZATION

Bibliographic Details
Main Author:	Deshpande, Mayur Nandkumar
Language:	English
Published:	The Ohio State University / OhioLINK 2010
Subjects:	Industrial Engineering Hot forging Finite Element Simulation Engine valves Shrink fit tooling
Online Access:	http://rave.ohiolink.edu/etdc/view?acc_num=osu1293467038

Similar Items

Technology to Improve Competitiveness in Warm and Hot Forging: Increasing Die Life and Material Utilization
by: Shirgaokar, Manas
Published: (2008)

Case Study of the Effect of Precoating on the Decarburization of the Surface Layer of Forged Parts during the Hot Die Forging Process
by: Paweł Widomski, et al.
Published: (2021-01-01)

Physical and Numerical Simulations of Closed Die Hot Forging and Heat Treatment of Forged Parts
by: Łukasz Poloczek, et al.
Published: (2021-12-01)

Investigation of the influence of hybrid layers on the life time of hot forging dies
by: S. Legutko, et al.
Published: (2013-04-01)

Closed-die forging process of copper alloy valve body: finite element simulation and experiments
by: Jing Yin, et al.
Published: (2021-01-01)

Estimation of Forging Die Wear and Cost
by: Groseclose, Adam R.
Published: (2010)

Sensitivity Analysis of Oxide Scale Influence on General Carbon Steels during Hot Forging
by: Bernd-Arno Behrens, et al.
Published: (2018-02-01)

Studies on a Robotised Process for Forging Steel Synchronizer Rings in the Context of Forging Tool Life
by: Cernohlavek, V., et al.
Published: (2023)

Advanced Complex Analysis of the Thermal Softening of Nitrided Layers in Tools during Hot Die Forging
by: Jakub Krawczyk, et al.
Published: (2021-01-01)

Factors Affecting the Wear Resistance of Forging Tools
by: Zwierzchowski M.
Published: (2017-09-01)

Wear Analysis of Die Inserts in the Hot Forging Process of a Forked Type Forging Using Reverse Scanning Techniques
by: Łukasz Dworzak, et al.
Published: (2017-12-01)

The Impact of the Lubricant Dose on the Reduction of Wear Dies Used in the Forging Process of the Valve Forging
by: Łukasz Dworzak, et al.
Published: (2021-01-01)

Energy-Saving Hot Open Die Forging Process of Heavy Steel Forgings on an Industrial Hydraulic Forging Press
by: Ryszard Dindorf, et al.
Published: (2020-04-01)

Predicting the Microstructure of a Valve Head during the Hot Forging of Steel 21-4N
by: Hongchao Ji, et al.
Published: (2018-05-01)

The Simulation and Analysis of the Closed Die Hot Forging Process by A Computer Simulation Method
by: Dipakkumar Gohil
Published: (2012-06-01)

Further Development of Wear Calculation and Wear Reduction in Cold Forging Processes
by: Bernd-Arno Behrens, et al.
Published: (2021-04-01)

Study on Carbide in Forged and Annealed H13 Hot Work Die Steel
by: Li Ji, et al.
Published: (2015-10-01)

Analysis Of Deformation And Microstructural Evolution In The Hot Forging Of The Ti-6Al-4V Alloy
by: Kukuryk M.
Published: (2015-06-01)

A material based approach to creating wear resistant surfaces for hot forging
by: Babu, Sailesh
Published: (2004)

Prediction of the parameters and the hot open die elongation forging process on an 80 MN hydraulic press
by: Dindorf Ryszard, et al.
Published: (2021-03-01)

Multi-Stage Cold Forging Process for Manufacturing a High-Strength One-Body Input Shaft
by: A Ra Jo, et al.
Published: (2021-01-01)

Hardness, tensile and impact behaviour of hot forged aluminium metal matrix composites
by: Sumesh Narayan, et al.
Published: (2017-07-01)

Improving durability of hot forging tools by applying hybrid layers
by: Z. Gronostajski, et al.
Published: (2015-10-01)

Closed-die forging and slab hot rolling with focus on material yield : some industrial problems analysed by FEM
by: Ervasti, Esa
Published: (2008)

The influence of thickness of CrN coating on the durability of hot forging dies
by: Smolik Jerzy
Published: (2011-06-01)

Correlations between Forging Tool Lifetime and the Continuous Curvature Transitions
by: Tamás Ibriksz, et al.
Published: (2019-10-01)

Hot forging for producing railway wagon bogie adapter
by: G. Song, et al.
Published: (2022-01-01)

Process Design for Hot Forging of Asymmetric to Symmetric Rib-web Shaped Steel
by: H. Cho, et al.
Published: (2003-01-01)

Study on forging process of valve based on response surface method
by: H. C. Ji, et al.
Published: (2020-01-01)

Mechanical and thermal properties of AA7075/TiO2/Fly ash hybrid composites obtained by hot forging
by: K.V. Shivananda Murthy, et al.
Published: (2017-08-01)

Minimization of stock weight during close-die forging of a spindle
by: Ssemakula, Hamzah
Published: (2013)

On the Effects of Hot Forging and Hot Rolling on the Microstructural Development and Mechanical Response of a Biocompatible Ti Alloy
by: Yoshimitsu Okazaki
Published: (2012-08-01)

Feasibility of Reduced Ingot Hot-Top Height for the Cost-Effective Forging of Heavy Steel Ingots
by: Nam Yong Kim, et al.
Published: (2020-06-01)

Analysis Of Deformation And Microstructural Evolution In The Hot Forgingof The Ti-6Al-4V Alloy
by: Kukuryk M.
Published: (2015-09-01)

Practical Use of Hot-Forged-Type Ti-42Al-5Mn and Various Recent Improvements
by: Toshimitsu Tetsui
Published: (2021-08-01)

BOUNDARY ELEMENT DETERMINATION OF STRAIN UNIFORM DISTRIBUTION CONDITIONS IN FORGINGS PRODUCED UNDER BROACHING BY RADIAL ROLLING-IMPRESSION DIES
by: Armenak V. Vovchenko
Published: (2018-07-01)

BOUNDARY ELEMENT DETERMINATION OF STRAIN UNIFORM DISTRIBUTION CONDITIONS IN FORGINGS PRODUCED UNDER BROACHING BY RADIAL ROLLING-IMPRESSION DIES
by: Armenak V. Vovchenko
Published: (2012-08-01)

Prediction of microstructural evolution during hot forging
by: Chen Fei, et al.
Published: (2014-01-01)

Effect of Heat Treatment on Microstructure and Mechanical Properties of High-Strength Steel for in Hot Forging Products
by: Moonseok Kang, et al.
Published: (2021-05-01)

Reparation of damaged forging dies
by: Vukić Lazić, et al.
Published: (2015-03-01)