Conception and development of improved analytical prediction models for fatigue induced tooth breakage due to cyclic bending in spur gear teeth

Conception and development of improved analytical prediction models for fatigue induced tooth breakage due to cyclic bending in spur gear teeth

Bibliographic Details
Main Author:	Daniewicz, Steve
Language:	English
Published:	The Ohio State University / OhioLINK 1991
Online Access:	http://rave.ohiolink.edu/etdc/view?acc_num=osu1207598214

Similar Items

Conception and development of improved analytical prediction models for fatigue induced tooth breakage due to cyclic bending in spur gear teeth /
by: Daniewicz, Steven R.
Published: (1991)

DEVELOPMENT OF AN EXPERIMENTAL METHODOLOGY FOR SINGLETOOTH BENDING FATIGUE EVALUATION OF SPUR GEARS
by: Srinivasan, Aravind
Published: (2020)

Tooth Root Bending Fatigue Strength of High-Density Sintered Small-Module Spur Gears: The Effect of Porosity and Microstructure
by: Vigilio Fontanari, et al.
Published: (2019-05-01)

Dynamic loads on spur gear teeth.
by: Yeh, Benjamin Hsi-Lu
Published: (2011)

Evaluation of Spur Gear Pair on Tooth Root Bending Stress in Radial Misalignment Contact Condition
by: Lias M.R., et al.
Published: (2014-07-01)

Deformation and stiffness of spur gear teeth and their influence on gear noise
by: Silvia MEDVECKÁ-BEŇOVÁ
Published: (2015-12-01)

An investigation of the dynamic loads in spur-gear teeth
by: Howland, John S
Published: (2005)

The measurement of static deflections in spur gear teeth
by: Furrow, Roger Wayne
Published: (2020)

Tooth Surface Failure of Straight Spur Gears
by: Nadano, Hiromasa
Published: (2017)

Spur Gear Tooth Topology Optimization: Finding Optimal Shell Thickness for Spur Gear Tooth produced using Additive Manufacturing
by: Adis J. Muminovic, et al.
Published: (2019-08-01)

The role of pores and microstructural heterogeneity on the tooth root fatigue strength of sintered spur gears
by: Benedetti Matteo, et al.
Published: (2018-01-01)

Real contact ratio and tooth bending stress calculation for plastic/plastic and plastic/steel spur gears
by: Jabbour Toni, et al.
Published: (2021-01-01)

Research on the problem of spur gear teeth contact in the car gear box
by: Viktor Skrickij
Published: (2010-12-01)

A study of parametric tooth profiles for spur gears and bevel gears
by: ZHANG,HUI-LONG, et al.
Published: (1991)

Investigating bending strength of spur gear: A review
by: Abdul Aziz Ismail Ali, et al.
Published: (2017-01-01)

Dimensioning and Geometrical Modeling of Spur Gears with Asymmetric Teeth
by: Editörden
Published: (2004-04-01)

A study of friction loss for spur gear teeth.
by: Tso, Lu-nien
Published: (2012)

Optimization of Tooth Root Profile Using Bezier Curve with G2 Continuity to Reduce Bending Stress of Asymmetric Spur Gear Tooth
by: Vaghela Priyakant, et al.
Published: (2018-01-01)

Tooth contact analysis of spur gears. Part 2-Analysis of modified gears
by: Pop Nicolae, et al.
Published: (2017-01-01)

EFFECT OF ASYMMETRY ON RADII OF CURVATURE FOR SPUR GEARS WITH NONSYMMETRICAL TEETH
by: Jarmila VOJTKOVÁ
Published: (2014-09-01)

AUTOMATING THE MODELLING PROCESS OF INVOLUTE SPUR GEARS WITH STRAIGHT TEETH
by: Tadeusz Markowski, et al.
Published: (2013-09-01)

A study of dynamic loads on straight spur gear teeth.
by: Umberger, Paul Jay
Published: (2012)

The study of oil films between the teeth of running spur gears
by: Ibrahim, Muhammad
Published: (1962)

Power loss analysis in altered tooth-sum spur gearing
by: Sachidananda H. K., et al.
Published: (2018-01-01)

Power loss analysis in altered tooth-sum spur gearing
by: Sachidananda H. K., et al.
Published: (2018-01-01)

A Mathematical Model for Parametric Tooth Profile of Spur Gears
by: Guodong Zhai, et al.
Published: (2020-01-01)

EFFECT OF RIM THICKNESS ON THE ROOT STRESSES OF SPUR GEAR TOOTH
by: Durmuş GÜNAY, et al.
Published: (1997-01-01)

Tooth contact analysis of spur gears. Part 1-SAM analysis of standard gears
by: Creţu Spiridon, et al.
Published: (2017-01-01)

Gear Root Bending Strength: A New Multiaxial Approach to Translate the Results of Single Tooth Bending Fatigue Tests to Meshing Gears
by: Franco Concli, et al.
Published: (2021-05-01)

Stress tension and deformation study in teeth of a cylindrical spur gears
by: Costică Hogaș, et al.
Published: (2016-12-01)

CALCULATION OF THE STRESSES ON THE WORKING SURFACE OF THE TEETHES OF OBLIQUE ANGLE SPUR GEARS
by: Yu V Belousov
Published: (2015-08-01)

Characteristic study and analysis of internal spur gears with crowned pinion teeth
by: CHEN, ZHENG-YU, et al.
Published: (1989)

A finite element analysis of pinion shaped spur gear teeth
by: Rhomberg, Edward W.
Published: (2019)

A photoelastic study of stress distribution in a spur gear tooth
by: Wang, Kuo Chang, 1924-
Published: (2014)

Spur Gears Static and Dynamic Meshing Simulation and Tooth Stress Calculation
by: Jammal Ali, et al.
Published: (2015-01-01)

Study on stress intensity factors for crack on involute spur gear tooth
by: Jian Cai, et al.
Published: (2015-03-01)

Tribological behavior of coated spur gear pairs with tooth surface roughness
by: Huaiju Liu, et al.
Published: (2018-01-01)

AN EXPERIMENTAL INVESTIGATION ON THE INFLUENCE OF TENSILE MEAN STRESS ON GEAR TOOTH BENDING FATIGUE LIFE
by: Teaford, Zachary Dean
Published: (2020)

Determination of Service Life of Sintered Powder Metallurgy Gears in Regard to Tooth Bending Fatigue
by: Marko Šori, et al.
Published: (2018-01-01)

A parametric study of frictional load influence in spur gear bending resistance
by: Osakue Edward E., et al.
Published: (2020-01-01)