FRAME TOPOLOGY OPTIMIZATION WITH STANDARD CROSS SECTIONS: ACCOUNTING FOR BUCKLING, STRESS CONSTRAINTS AND GEOMETRIC VARIABILITY

FRAME TOPOLOGY OPTIMIZATION WITH STANDARD CROSS SECTIONS: ACCOUNTING FOR BUCKLING, STRESS CONSTRAINTS AND GEOMETRIC VARIABILITY

Bibliographic Details
Main Author:	Changizi, Navid
Language:	English
Published:	Cleveland State University / OhioLINK 2016
Subjects:	Civil Engineering
Online Access:	http://rave.ohiolink.edu/etdc/view?acc_num=csu1470847100

Similar Items

Cost optimization of rectangular frames with variable topology and geometry
by: Zuniga, M. M.
Published: (1982)

Geometrically non-linear analysis of plane frames composed of prismatic and tapered sections
by: Bawa, Gurinder S.
Published: (1988)

Geometric variational problems with cross-sectional constraints
by: Meng, Zheng
Published: (2009)

INFLUENCE OF USING DISCRETE CROSS-SECTION VARIABLES FOR ALL TYPES OF TRUSS STRUCTURAL OPTIMIZATION WITH DYNAMIC CONSTRAINTS FOR BUCKLING
by: Nenad Petrović, et al.
Published: (2018-06-01)

Effect of Beam Splicing on Seismic Response of Buckling-Restrained Braced Frames
by: Prinz, Gary S.
Published: (2007)

Volumetric topology optimization under redundancy constraints
by: Pagonakis, Dimitrios
Published: (2016)

The effect of geometric constraint on mixed mode crack paths
by: Faulke, Darren Andrew
Published: (1997)

Buckling-Restrained Braced Frame Connection Design and Testing
by: Coy, Bradly B.
Published: (2007)

Geometric and Material Nonlinear Analysis of Frames with Nonuniform Cross-Sections
by: Judy P. Yang, et al.
Published: (2006)

Structural optimization of a planar reciprocal frame with triangular topology
by: Ip, Gerry H. F. (Gerry Hiu Fing)
Published: (2016)

Lateral-Torsional Buckling Capacity of Tapered-Flange Moment Frame Shapes
by: O'Neill, Leah
Published: (2014)

Lateral-torsional buckling of compressed and highly variable cross section beams
by: Mascolo Ida, et al.
Published: (2016-06-01)

Reducing Drifts in Buckling Restrained Braced FramesThrough Elastic Stories
by: Craft, Jennifer Lorraine
Published: (2015)

A STUDY ON THE GEOMETRICALLY NONLINEAR BUCKLING AND POST-BUCKLING BEHAVIOR OF THIN-WALLED OPEN-SECTION BEAMS
by: Wen-Yi Lin, et al.
Published: (1999)

Buckling of rigid frames
by: Look, Jung-On.
Published: (2015)

A New Buckling-Restrained Brace with a Variable Cross-Section Core
by: Liang Li, et al.
Published: (2019-01-01)

Impact of Large Gravity Loads on Buckling Restrained Braced Frame Performance
by: Matthews, Mark Thurgood
Published: (2009)

The algorithm of the cross-section optimization of inelastic geometrical nonlinear steel frame structures
by: Romanas Karkauskas, et al.
Published: (2009-05-01)

Optimized Distribution of Strength in Buckling-Restrained Brace Frames in Tall Buildings
by: Oxborrow, Graham Thomas
Published: (2009)

Geometrically nonlinear analysis of the stability of the stiffened plate taking into account the interaction of eigenforms of buckling
by: Gaik A. Manuylov, et al.
Published: (2021-12-01)

Local Buckling of Doubly-Symmetric I-Sections Subjected to Warping Torsion : The limitations of the Reduced Cross-Section Method under unconventional loading
by: Ori, Miklós
Published: (2019)

Parametric Study of Friction-Damped Braced Frames with Buckling-Restrained Columns using Recommended Frame and BRC Strength Factors
by: Anozie, Valencia Chibuike
Published: (2017)

The structural efficiency of tapered steel section with perforation under lateral torsional buckling behaviour
by: De'nan, Fatimah, et al.
Published: (2020)

Buckling of Tapered Columns with Polygon Cross-Section
by: Magdy Salama
Published: (2018-04-01)

Robust Feature Tracking in Image Sequences Using View Geometric Constraints
by: Lawver, Jordan D.
Published: (2013)

Investigation of seismic response of asymmetric buckling restrained braced frames equipped with zipper struts
by: Nader Hoveidae, et al.
Published: (2021-05-01)

Buckling and Geometric Nonlinear Stress Analysis : Circular glulam arched structures
by: Sherzad, Rafiullah, et al.
Published: (2016)

Elastic buckling of rigid frames
by: Park, Bong Soo
Published: (2011)

Optimisation of the Hydroforming Process of Geometrically Complex Aluminium Tubes Taking Account of Preceding Forming Processes
by: Bihamta, Reza
Published: (2011)

FINITE-ELEMENT ANALYSIS OF PLATE BUCKLING AND POSTBUCKLING
by: VOS, ROBERT GLENN
Published: (2007)

Plastic buckling of circular plates on elastic foundations
by: Bahous, André
Published: (2014)

Torsional buckling and instability of steel structural members
by: Corner, Quinten
Published: (2014)

Lateral buckling of steel I-section bridge girders braced by U-frames
by: Yuen, Rose Mui
Published: (1992)

Creep buckling with lateral constraint
by: Freed, Neville Hannan
Published: (1965)

Experimental and Numerical Study on the Lateral-Torsional Buckling of Steel C-Beams with Variable Cross-Section
by: Ida Mascolo, et al.
Published: (2018-11-01)

Finite Element Analysis of Lateral Torsional Buckling Behaviour of Tapered Steel Section with Perforation
by: Naaim, Nurfarhah, et al.
Published: (2016)

Minimizing Base Column Demands in Multi-Story Buckling Restrained Braced Frames Using Genetic Algorithms
by: Yeates, Christopher Hiroshi
Published: (2010)

An Elastica Model that Describes the Buckling of Cross-sections of Nanotubes
by: Leta, James V.
Published: (2011)

Probabilistic buckling analysis of stringer-stiffened cylinders
by: Chryssanthopoulos, Marios Konstantinou
Published: (1989)

Optimization of stiffener placement for thin plate buckling
by: Hopkins, Thomas Andrew
Published: (2008)

Cannot write session to /tmp/vufind_sessions/sess_0u15mrof3bejbj9q4n3log4kja