A STUDY OF CHARRING BEHAVIOR OF WOODS BASED ON INTERNAL TEMPERATURE AND CT-SCAN MEASUREMENTS

A STUDY OF CHARRING BEHAVIOR OF WOODS BASED ON INTERNAL TEMPERATURE AND CT-SCAN MEASUREMENTS

Bibliographic Details
Main Author:	Tian, Ye
Language:	English
Published:	Case Western Reserve University School of Graduate Studies / OhioLINK 2019
Subjects:	Mechanical Engineering
Online Access:	http://rave.ohiolink.edu/etdc/view?acc_num=case1554473937988922

Similar Items

Gasification and combustion modeling for porous char particles
by: Singer, Simcha Lev
Published: (2012)

Prediction of fire origin location to wood materials charring
by: Lipinskas, Donatas
Published: (2007)

Modeling of char oxidation in fluidized bed biomass gasifiers : effects of transport and chemical kinetics
by: Brooks, Amelia (Amelia Samek)
Published: (2015)

Wood shrinkage in CT-scanning analysis
by: Couceiro, José
Published: (2016)

Thermal deactivation and reactivity of high temperature coal chars
by: Russell, Nigel Vincent
Published: (1998)

Modeling Coordinate Measuring Machine Scanning Operations
by: Moor, Pamela Murray
Published: (2007)

Research of natural wood combustion and charring processes
by: Romualdas Mačiulaitis, et al.
Published: (2012-09-01)

Means to measure the aesthetic properties of wood
by: Broman, Olof
Published: (2000)

High temperature gasification of coal char in carbon dioxide and steam
by: Dershowitz, Mark Steven
Published: (2005)

The effect of probe tilt angle on the quality of scanning tunneling microscope measurements
by: Hopkins, Jonathan B. (Jonathan Brigham)
Published: (2006)

The role of active surface sites in CO₂ gasification of polymer char and coal chars
by: Wang, Jisheng
Published: (1989)

High-Pressure Oxidation Rates for Large Coal and Char Particles
by: Mathias, James A.
Published: (1996)

Parallel and series-reaction mechanisms of wood and char combustion
by: Branca Carmen, et al.
Published: (2004-01-01)

Sorption-Related Characteristics of Surface Charred Spruce Wood
by: Maija Kymäläinen, et al.
Published: (2018-10-01)

Surface Characteristics of One-Sided Charred Beech Wood
by: Dita Machová, et al.
Published: (2021-05-01)

Woods Charred at Low Temperatures and Their Modification for the Adsorption of Cr(VI) Ions from Aqueous Solution
by: Zhenze Li, et al.
Published: (2010-06-01)

Gasification Of Wood-Char Spheres In CO2-N2 Mixtures : Ananlysis And Experiments
by: Dasappa, S
Published: (2012)

A confocal scanning laser holography (CSLH) microscope to non-intrusively measure the three-dimensional temperature and composition of a fluid
by: Jacquemin, Peter B.
Published: (2010)

Genome scanning : an AFM-based DNA sequencing technique
by: Elmouelhi, Ahmed (Ahmed M.), 1979-
Published: (2006)

Thermally driven visco-elastic measurement technique via spectral variations in scanning probe microscopy cantilevers
by: Jones, Ryan Edward, 1974-
Published: (2005)

Determining the Temperature and Time of Wood Combustion from Char Layer Parameters: Methodological Guidelines for Fire Investigators
by: I. S. Taubkin
Published: (2017-12-01)

Gasification of Continuous Wood Char Bed: Modelling and Experimental Approach
by: G. Teixeira, et al.
Published: (2014-06-01)

Dynamic study of tunable stiffness scanning microscope probe
by: Vega González, Myraida Angélica
Published: (2006)

Measurement of operating temperature in spark ignition engine
by: Chua-Unsu, David D
Published: (2005)

Determining internal leakages of high pressure and temperature steam valves
by: Bapeekee, Sulaiman Ahmed Sadeck
Published: (2017)

CT-scanning of moisture distribution and shell formation during wood drying
by: Wiberg, Pär
Published: (1998)

Measuring Thermal Conductivity of Powder Insulation at Cryogenic Temperatures

Switchable stiffness scanning microscope probe
by: Mueller-Falcke, Clemens T. (Clemens Tobias)
Published: (2006)

COMPARISON OF EXPERIMENTAL CHARRING RATE OF SOME SELECTED CONSTRUCTIONAL WOOD SPECIES FROM SOUTH WESTERN NIGERIA WITH SELECTED CHARRING MODELS
by: O. A. Adetayo, et al.
Published: (2019-03-01)

Re-inventing Core Body Temperature Measurement
by: SHAHROOZ, MINA
Published: (2017)

Edge scanning and swept surface approximation in reverse engineering
by: Schreve, Kristiaan
Published: (2012)

Measurement of air temperatures and velocities in the fiber glass forming environment
by: McKeone, Brett M. (Brett Matthew), 1976-
Published: (2008)

Low-Temperature Aqueous Corrosion Behavior of Uranium Molybdenum Alloys
by: Gardner, Levi D.
Published: (2016)

Kuu-Char seeds effect the quality of Kuu-Char oil in the temperature control heating furnace
by: kao chih-cheng, et al.
Published: (2013)

Factors Influencing the Charring Rate of Chinese Wood by using the Cone Calorimeter
by: Liulai Wen, et al.
Published: (2015-09-01)

Durability and Fire Performance of Charred Wood Siding (Shou Sugi Ban)
by: Laura E. Hasburgh, et al.
Published: (2021-09-01)

A quantitative study of the feasibility of oxygen laser induced fluorescence for engineering gas temperature measurements
by: Ceyhan, Ismail
Published: (2008)

Modeling the performance of the piston ring-pack in internal combustion engines
by: Tian, Tian
Published: (2005)

The manufacture of carbonised briquettes and chars from lignite
by: McBride, Colin Thomas
Published: (1990)

A method for infrared temperature measurements of thin film materials with a low, unknown, and/or variable emissivity at low temperatures
by: Jarboe, Jason Neal
Published: (2014)

Cannot write session to /tmp/vufind_sessions/sess_8ntcj3fgdfk8gc36b71gmb9hir