Transmission loss of prospective power transmission model system integrated under superconducting environment

Transmission loss of prospective power transmission model system integrated under superconducting environment

Bibliographic Details
Main Authors:	Shimizu, H., Yokomizu, Y., Kato, T., Tang, Y. J., Matsumura, T., Kito, Y., Satoh, K., Satoh, W.
Language:	en
Published:	IEEE 1997
Online Access:	http://hdl.handle.net/2237/6804 http://dx.doi.org/10.1109/77.614694

Similar Items

Development of the Prospective Power Transmission Model System Integrated under Superconducting Environment-PROMISE
by: Tang, Y.J., et al.
Published: (1995)

Dependence of quench current level on current ramp rate in AC superconducting windings under different fixing conditions
by: Shimizu, H., et al.
Published: (2000)

Quench current level-time characteristics of AC insulated multi-strand superconducting cables
by: Kato, T., et al.
Published: (1997)

Dependence of quench current level of superconducting wire and cable on the winding tension
by: Shimizu, H., et al.
Published: (1999)

Novel measurement methods of propagation velocity and direction of normal zone in ac superconducting wire
by: Kawasumi, T., et al.
Published: (2000)

Resistance rise in Bi2223 superconducting bulk after normal transition due to overcurrent
by: Shimizu, H., et al.
Published: (2001)

Development of flux-lock-type fault current limiter with high-Tc superconducting element
by: Matsumura, T., et al.
Published: (1997)

Proposal of flux flow resistance type fault current limiter using Bi2223 high T/sub c/ superconducting bulk
by: Shimizu, H., et al.
Published: (2002)

AC loss characteristics of monolayer and multilayer superconducting power transmission cables
by: Li, Quan
Published: (2011)

A study on required volume of superconducting element for flux flow resistance type fault current limiter
by: Shimizu, H., et al.
Published: (2003)

Design guideline of flux-lock type HTS fault current limiter for power system application
by: Matsumura, T., et al.
Published: (2001)

Position of quench initiation in 6 kV-200 A class superconducting fault current limiter
by: Shimizu, H., et al.
Published: (1997)

Transmission coefficients of superconducting particles
by: A. V. Matasov, et al.
Published: (2021-05-01)

Transmission loss evaluation for a power system under expansion
by: 陳子力
Published: (1992)

Asian international grid connection and potentiality of DC superconducting power transmission
by: Satarou Yamaguchi, et al.
Published: (2018-01-01)

Parallel-plate superconducting transmission lines
by: Huang, Jun Zhe, et al.
Published: (1994)

The analysis of planar superconducting transmission lines
by: Mao, Shao Gang, et al.
Published: (1994)

Design of superconducting transmission line integrated surface-electrode ion-traps
by: Meyer, David Thomas
Published: (2011)

Power losses in a farm tractor transmission
by: Bullard, David Edwin
Published: (1960)

Optimal Economic Dispatch for Integrated Power and Heating Systems Considering Transmission Losses
by: Bonan Huang, et al.
Published: (2019-06-01)

Transmission Loss Allocation for Pool-Bilateral Hybrid Markets under a Deregulated Environment
by: Hon-wei Chang, et al.
Published: (2005)

Generating performance of limiting impedance in flat type of fault current limiter with high Tc superconducting plate
by: Matsumura, Toshiro, et al.
Published: (2005)

An Experimental Study of Power Losses of an Automotive Manual Transmission
by: Szweda, Timothy Andrew
Published: (2008)

A Recursive Solution for Power-Transmission Loss in DC-Powered Networks
by: Sehwan Kim, et al.
Published: (2014-11-01)

An Investigation of Transmission Problem in Power Deregulation Environment
by: Chong-Yih Li, et al.
Published: (2001)

Fabrication considerations of a superconducting transmission line microelectromechanical switch
by: Corrales, Alfredo Arturo
Published: (2002)

Power loss in planetary gear transmissions lubricated with axle oils
by: David Pinho Silva Dias da Costa
Published: (2019)

ELECTRODYNAMICS OF TRANSMISSION AND LOSSES OF POWER IN THE DEVICES OF ELECTRIC TRACTION SYSTEMS
by: M. O. Kostin
Published: (2014-01-01)

Fast Allocation of Transmission Loss for a Deregulated Power System
by: Yuh-Jyh Lin, et al.
Published: (1999)

A Study on Transmission Loss Attributed to Independent Power Producers
by: Hsiau-Yuang Hsu, et al.
Published: (2001)

Estimation of transmission losses in a changing electric power industry
by: Cordero, Roberto
Published: (2007)

Wind Power Integration in Power Systems with Transmission Bottlenecks
by: Matevosyan, Julija
Published: (2006)

Fundamental performance of flux-lock type fault current limiter with two air-core coils
by: Matsumura, T., et al.
Published: (2003)

Relation between critical current density and flux flow resistivity in Bi2223 bulk element for fault current limiter
by: Aritake, T., et al.
Published: (2003)

Current-Injection Based Transmission Loss Allocation by Applying Shapley Value under a Deregulated Environment
by: I-Hua Chung, et al.
Published: (2004)

Power Loss Modelling of a Rear Axle Transmission with Experimental Study of No-load Losses
by: Mário Jorge da Silva Gomes Pereira Correia
Published: (2019)

Increase in transient resistance of Bi2223 superconducting bulk by applying external magnetic field
by: Kato, K., et al.
Published: (2001)

A Practical Radiosity Method for Predicting Transmission Loss in Urban Environments
by: Liu Qin, et al.
Published: (2004-01-01)

A Practical Radiosity Method for Predicting Transmission Loss in Urban Environments
by: Liang Ming, et al.
Published: (2004-01-01)

Losses in type 2 superconducting wire due to alternating and rotating fields
by: Pang, C-Y.
Published: (1981)