In-situ electrical terminal characterization of fuel cell stacks

In-situ electrical terminal characterization of fuel cell stacks

This thesis demonstrates in-situ characterization of a 5kW solid oxide fuel cell (SOFC) stack and a 165W proton exchange membrane fuel cell (PEMFC) stack at the electrical terminals, using impedance spectroscopy and time-domain modeling. The SOFC experiments are performed using excitation from the p...

Full description

Bibliographic Details
Main Author:	Seger, Eric Matthew
Language:	en
Published:	2010
Online Access:	http://etd.lib.montana.edu/etd/2010/seger/SegerE0510.pdf

Similar Items

Characterization of a 5 kW solid oxide fuel cell stack using power electronic excitation
by: Seger, Eric, et al.
Published: (2012)

Energy management in electric systems fed by fuel cell stacks
by: Sanchez, Antonio
Published: (2011)

Energy management in electric systems fed by fuel cell stacks
by: Sanchez, Antonio
Published: (2011)

Electric motor-glider powered by a hydrogen fuel cell stack
by: Czarnocki Piotr, et al.
Published: (2019-01-01)

Fault Characterization of a Proton Exchange Membrane Fuel Cell Stack
by: Samuel Simon Araya, et al.
Published: (2019-01-01)

In situ monitoring in a high-temperature fuel cell stack using flexible micro integrated sensors
by: Yen-Ting Cheng, et al.

Low humidity of fuel cell stack
by: Wei-Hau Wu, et al.

Molasses wastewater treatment and electricity production using baffled stacking microbial fuel cells
by: Dong-Kai Jhang, et al.
Published: (2013)

A study of micro-tubular solid oxide fuel cell stacks
by: Lockett, Matthew
Published: (2006)

Study of Piezoelectric Proton Exchange Membrane Fuel Cell Stack (PZT-Stack)
by: Hsiu-Min Cheng, et al.
Published: (2012)

Development of an Electrical Vehicle Based on Hybrid Power of Fuel Cell Stack and Lithium Ion Battery
by: Lin, Hsien-Liang, et al.
Published: (2013)

In situ characterization of electrochemical processes of solid oxide fuel cells
by: Li, Xiaxi
Published: (2016)

Research of metal bipolar plate fuel cell stack
by: Chau-Juan Chiou, et al.
Published: (2010)

Simple Stacking Methods for Silicon Micro Fuel Cells
by: Gianmario Scotti, et al.
Published: (2014-08-01)

The modularization of Proton Exchange Membrane Fuel Cell Stack
by: Chih-Yu Wu, et al.
Published: (2017)

In-Situ Measurement of High-Temperature Proton Exchange Membrane Fuel Cell Stack Using Flexible Five-in-One Micro-Sensor
by: Chi-Yuan Lee, et al.
Published: (2016-10-01)

Performance Analysis of Different Fuel Supply Paths on the Planar Fuel Cell Stack
by: Hung-yu Chen, et al.
Published: (2018)

In Situ Water Electrolyzer Stack for an Electrobioreactor
by: Georgy Givirovskiy, et al.
Published: (2019-05-01)

Design and experimental characterization of a 350 W High Temperature PEM fuel cell stack
by: N. Zuliani
Published: (2013-04-01)

Design and experimental characterization of a 350 W High Temperature PEM fuel cell stack
by: N. Zuliani
Published: (2013-04-01)

Design and experimental characterization of a 350 W High Temperature PEM fuel cell stack
by: Nicola Zuliani
Published: (2011-01-01)

Optimization for Fuel Cells/Fuel Cell Stacks Using Combined Methods---CFD Modeling Analysis, and Experiments
by: Liu, Hong
Published: (2013)

Study on Steady and Dynamic Characteristics of PEM Fuel Cell Stacks
by: Ching-Jang Chiou, et al.
Published: (2010)

Modulization and Performance Analysis of Direct Methanol Fuel Cell Stack
by: Shu-Hao Hu, et al.
Published: (2010)

A fuel cell stack with Heterogeneous composite bipolar plate
by: Cheng-chih Lai, et al.
Published: (2013)

Performance analysis and Design of Direct Methanol Fuel Cell stacks
by: Chen-chung Chung, et al.
Published: (2004)

Investigation and analysis of the dynamic behaviour of an alkaline fuel cell stack
by: Durr, Matthias
Published: (2007)

Advanced model based control for PEM fuel cell stacks
by: Ragb, Omar B. K.
Published: (2012)

Studies of a Variable Voltage PEM Fuel Cell Stack
by: You-Min Su, et al.
Published: (2009)

Metal bipolar plates for PEMFC fuel cell stack of the development
by: Jen-Hao Pai, et al.
Published: (2013)

An Experimental Study of Micro Direct Methanol Fuel Cell Stacks
by: Ho-Chieh Wu, et al.
Published: (2013)

Temperature Control of Proton Exchange Membrane Fuel Cell Stack
by: Huang-Yuan Chao, et al.
Published: (2006)

Numerical Analysis of Two Units PEM Fuel Cell Stack
by: Tugay ARIÇ, et al.
Published: (2019-12-01)

Modeling of a Proton Exchange Membrane Fuel Cell Stack
by: DeLashmutt, Timothy E.
Published: (2008)

The study of electrical characterization of 3D stacked TSV simulation
by: Shin-Chun Lin, et al.
Published: (2018)

Development and Characterization of an Electrically Rechargeable Zinc-Air Battery Stack
by: Hongyun Ma, et al.
Published: (2014-10-01)

Bridging the Gap between Automated Manufacturing of Fuel Cell Components and Robotic Assembly of Fuel Cell Stacks
by: Devin Fowler, et al.
Published: (2019-09-01)

Simplified mathematical model of proton exchange membrane fuel cell based on horizon fuel cell stack
by: Ibrahim M. M. Saleh, et al.
Published: (2016-01-01)

Cooling Performance Characteristics of the Stack Thermal Management System for Fuel Cell Electric Vehicles under Actual Driving Conditions
by: Ho-Seong Lee, et al.
Published: (2016-04-01)

Computational Fluid Dynamics Modelling of Solid Oxide Fuel Cell Stacks
by: Nishida, Robert Takeo
Published: (2013)

Cannot write session to /tmp/vufind_sessions/sess_9h7nbpqjqcq2ao6s9a717ppjdj