Cold start fuel management of port-fuel-injected internal combustion engines

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2005. === Includes bibliographical references (p. 64). === The purpose of this study is to investigate how changes in fueling strategy in the second cycle of engine operation influence the delivered charge fuel ma...

Full description

Bibliographic Details
Main Author: Cuseo, James M. (James Michael)
Other Authors: Wai K. Cheng.
Format: Others
Language:English
Published: Massachusetts Institute of Technology 2006
Subjects:
Online Access:http://hdl.handle.net/1721.1/32380
id ndltd-MIT-oai-dspace.mit.edu-1721.1-32380
record_format oai_dc
spelling ndltd-MIT-oai-dspace.mit.edu-1721.1-323802019-05-02T15:56:12Z Cold start fuel management of port-fuel-injected internal combustion engines Cuseo, James M. (James Michael) Wai K. Cheng. Massachusetts Institute of Technology. Dept. of Mechanical Engineering. Massachusetts Institute of Technology. Dept. of Mechanical Engineering. Mechanical Engineering. Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2005. Includes bibliographical references (p. 64). The purpose of this study is to investigate how changes in fueling strategy in the second cycle of engine operation influence the delivered charge fuel mass and engine out hydrocarbon (EOHC) emissions in that and subsequent cycles. Close attention will be paid to cycle-to-cycle interaction of the fueling strategy. It is our intent to see if residual fuel from each cycle has a predicable influence on subsequent cycle's charge mass and EOHC emissions. The fast flame ionization detector is employed to measure both in-cylinder and engine out hydrocarbon concentrations for various cold start strategies. The manufacturer's original fueling strategy is used as a starting point and is compared to a "in-cylinder fuel air ratio (Phi) [approx.] 1" case (a fueling strategy that results in an in-cylinder concentration of approximately stoichiometric for each of the first five cycles) and to a number of cases that are chosen to illustrate cycle-to-cycle mixture preparation dependence on second cycle fueling. Significant cycle-to-cycle dependence is observed with the change in second cycle. A fueling deficit in cycle two has a more pronounce effect on future cycles delivered charge mass than a fueling surplus while a fueling surplus in cycle two has a more pronounce effect on future cycles charge mass than a fueling deficit. by James M. Cuseo. S.M. 2006-03-29T18:39:14Z 2006-03-29T18:39:14Z 2005 2005 Thesis http://hdl.handle.net/1721.1/32380 61523066 eng M.I.T. theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. See provided URL for inquiries about permission. http://dspace.mit.edu/handle/1721.1/7582 64 p. 2875670 bytes 2877486 bytes application/pdf application/pdf application/pdf Massachusetts Institute of Technology
collection NDLTD
language English
format Others
sources NDLTD
topic Mechanical Engineering.
spellingShingle Mechanical Engineering.
Cuseo, James M. (James Michael)
Cold start fuel management of port-fuel-injected internal combustion engines
description Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2005. === Includes bibliographical references (p. 64). === The purpose of this study is to investigate how changes in fueling strategy in the second cycle of engine operation influence the delivered charge fuel mass and engine out hydrocarbon (EOHC) emissions in that and subsequent cycles. Close attention will be paid to cycle-to-cycle interaction of the fueling strategy. It is our intent to see if residual fuel from each cycle has a predicable influence on subsequent cycle's charge mass and EOHC emissions. The fast flame ionization detector is employed to measure both in-cylinder and engine out hydrocarbon concentrations for various cold start strategies. The manufacturer's original fueling strategy is used as a starting point and is compared to a "in-cylinder fuel air ratio (Phi) [approx.] 1" case (a fueling strategy that results in an in-cylinder concentration of approximately stoichiometric for each of the first five cycles) and to a number of cases that are chosen to illustrate cycle-to-cycle mixture preparation dependence on second cycle fueling. Significant cycle-to-cycle dependence is observed with the change in second cycle. A fueling deficit in cycle two has a more pronounce effect on future cycles delivered charge mass than a fueling surplus while a fueling surplus in cycle two has a more pronounce effect on future cycles charge mass than a fueling deficit. === by James M. Cuseo. === S.M.
author2 Wai K. Cheng.
author_facet Wai K. Cheng.
Cuseo, James M. (James Michael)
author Cuseo, James M. (James Michael)
author_sort Cuseo, James M. (James Michael)
title Cold start fuel management of port-fuel-injected internal combustion engines
title_short Cold start fuel management of port-fuel-injected internal combustion engines
title_full Cold start fuel management of port-fuel-injected internal combustion engines
title_fullStr Cold start fuel management of port-fuel-injected internal combustion engines
title_full_unstemmed Cold start fuel management of port-fuel-injected internal combustion engines
title_sort cold start fuel management of port-fuel-injected internal combustion engines
publisher Massachusetts Institute of Technology
publishDate 2006
url http://hdl.handle.net/1721.1/32380
work_keys_str_mv AT cuseojamesmjamesmichael coldstartfuelmanagementofportfuelinjectedinternalcombustionengines
_version_ 1719031289929007104