Directional solidification characteristics of hyper-eutectic Al-Cu alloys under varying gravity conditions

Directional solidification characteristics of hyper-eutectic Al-Cu alloys under varying gravity conditions

Show other versions (1)

Bibliographic Details
Main Author:	Yu, Hong.
Published:	2013
Online Access:	http://hdl.handle.net/1993/20804

Similar Items

Directional solidification characteristics of hyper-eutectic Al-Cu alloys under varying gravity conditions
by: Yu, Hong.
Published: (2013)

Simulation and examination of directional solidification characteristics of hyper-eutectic Al-38wt%Cu alloys
by: Sawatzky, Trevor
Published: (2007)

Simulation and examination of directional solidification characteristics of hyper-eutectic Al-38wt%Cu alloys
by: Sawatzky, Trevor
Published: (2007)

Simulation and examination of directional solidification characteristics of hyper-eutectic Al-38wt%Cu alloys
by: Sawatzky, Trevor
Published: (2007)

Directional solidification of Zn-Al-Cu eutectic alloy by the vertical Bridgman method
by: Büyük U., et al.
Published: (2015-01-01)

The directional solidification study of A356 aluminum alloy and Al-Si eutectic alloy
by: Chia-Sin Lin, et al.
Published: (2014)

The Refining Mechanism of Super Gravity on the Solidification Structure of Al-Cu Alloys
by: Yuhou Yang, et al.
Published: (2016-12-01)

Solidification behaviour of eutectic and near eutectic aluminum-copper alloys
by: Rohatgi, P. K
Published: (2012)

The effect of direct current on solidification structure of Pb- Sn eutectic alloy
by: Shyue-Long Louh, et al.
Published: (1993)

Solidification of eutectic alloys : an application of electroslag remelting
by: Johnson, A. J. D.
Published: (1973)

Evolution of eutectic spacing during unidirectional solidification of Al-Ni alloys
by: Igor Jefferson Cabral Araujo, et al.
Published: (2011-01-01)

Modification of Primary Silicon in a hyper-eutectic Al-Si alloys
by: Liang-yu Chen, et al.
Published: (2011)

Effect of phosphor addition on eutectic solidification and microstructure of an Al-13%Si alloy
by: Liao Hengcheng, et al.
Published: (2011-11-01)

Solidification of Al-xCu alloy under high pressures
by: X. Liu, et al.
Published: (2020-05-01)

Orientation and Microstructure Evolution of Al-Al<sub>2</sub>Cu Regular Eutectic Lamellar Bifurcating in an Abruptly Changing Velocity under Directional Solidification
by: Ka Gao, et al.
Published: (2020-02-01)

The Centrifuging Casting Process of A390 Hyper-eutectic Al-Si Alloy
by: Bai-Lun Zheng, et al.
Published: (2017)

Effect of Sb Addition on the Solidification of Deeply Undercooled Ag-28.1 wt. % Cu Eutectic Alloy
by: Su Zhao, et al.
Published: (2016-02-01)

Solidification, microstructure and mechanical properties of rapidly solidified eutectic alloys
by: Jabczynski, Francis Stephen John
Published: (1979)

Effect of Fe, Ni, and Cr on the corrosion behaviour of hyper-eutectic Al-Si automotive alloy under different pH conditions
by: Mohammad Salim Kaiser, et al.
Published: (2018-05-01)

Functions and mechanism of modification elements in eutectic solidification of Al-Si alloys: A brief review
by: Zu Fangqiu, et al.
Published: (2014-07-01)

A Study on Nanoscale Solidification Mechanism of Bi-Sn Eutectic Alloy
by: Hsueh, Lee-Ming, et al.
Published: (2010)

Microstructure characterization and hardness of Al-Cu-Mn eutectic alloy
by: Yusuf Kaygısız
Published: (2018-09-01)

Textures in superplastic Sn-Pb and Al-Cu eutectic alloys
by: Cutler, C. P.
Published: (1971)

Directional solidification of metal-gas eutectic and fabrication of regular porous metals
by: Yuan LIU, et al.
Published: (2005-08-01)

Synthesis of a Metal Oxide by Forming Solvate Eutectic Mixtures and Study of Their Synthetic Performance under Hyper- and Hypo-Eutectic Conditions
by: Omar Gómez Rojas, et al.
Published: (2020-05-01)

Optimization of Key Factors Controlling the Refinement of Primary Silicon in a Hyper-eutectic Al-Si Alloy
by: Yu-Ta Cheng, et al.
Published: (2012)

Experimental Study of Double-diffusive Convection for a Hyper-Eutectic Binary Solution during the Unidirectional Solidification Process by PIV
by: Cheng-Gan Huang, et al.
Published: (2006)

Investigation on the leading phase of Al2O3/YAG eutectic crystals prepared by directional solidification
by: Yujie Zhong, et al.
Published: (2020-07-01)

Solidification characteristics of Fe-Ni peritectic alloy thin strips under a near-rapid solidification condition
by: Chang-jiang Song, et al.
Published: (2015-05-01)

Solid-liquid interface morphology of white carbide eutectic during directional solidification
by: Trepczyńska-Łent M.
Published: (2017-03-01)

The competitive effects of impurity modification and quench modification on the eutectic solidification of aluminum-silicon alloys
by: Napolitano, Ralph E., Jr.
Published: (2008)

Effect of abruptly changing withdrawal rate on solidification microstructure in directionally solidified Al-4.5wt%Cu alloy
by: Yang Luyan, et al.
Published: (2014-01-01)

The solidification of some metal/non-metal eutectics
by: Steen, H. A. H.
Published: (1973)

Computer Simulation And Unidirectional Solidification Of Al-Zn-Mg-Cu Alloys
by: Lee, cheng shie, et al.
Published: (1994)

Structure of the Eutectoid Zn-Al Alloy Obtained by Directed Solidification
by: Mirela AGAPIE, et al.
Published: (2014-03-01)

The influence of start-stop velocity cycling on the friction and wear behaviour of a hyper-eutectic Al-Si automotive alloy
by: Walker, J.C, et al.
Published: (2013)

Enhanced Tensile Plasticity in Ultrafine Lamellar Eutectic Al-CuBased Composites with <em>α</em>-Al Dendrites Prepared by Progressive Solidification
by: Jialin Cheng, et al.
Published: (2019-09-01)

Impurity Distribution after Solidification of Hypereutectic Al-Si Melts and Eutectic Al-Si Melt
by: Li Yanlei, et al.
Published: (2019-02-01)

Numerical Simulation on Dendrite Growth During Solidification of Al-4%Cu Alloy
by: ZHANG Min, et al.
Published: (2016-06-01)

Mechanical Behavior of Al–Al<sub>2</sub>Cu–Si and Al–Al<sub>2</sub>Cu Eutectic Alloys
by: Qian Lei, et al.
Published: (2021-02-01)