An investigation into the three-dimensional force and moment characteristics of selected low-modulus initial alignment archwires

An investigation into the three-dimensional force and moment characteristics of selected low-modulus initial alignment archwires

Show other versions (1)

Bibliographic Details
Main Author:	Sullivan, Daniel James.
Published:	2013
Online Access:	http://hdl.handle.net/1993/15135

Similar Items

An investigation into the three-dimensional force and moment characteristics of selected low-modulus initial alignment archwires
by: Sullivan, Daniel James.
Published: (2013)

Measurement of Forces and Moments in Three-Dimensional Archwires
by: Buelow, Dwight Van
Published: (2003)

An investigation of intramaxillary anchorage with low modulus archwires
by: Levine, Gregory
Published: (2014)

An investigation of the three-dimensional force and moment design parameters of selected orthodontic alignment loops
by: Meador, Donald Kenneth.
Published: (2013)

An investigation of the three-dimensional force and moment design parameters of selected orthodontic alignment loops
by: Meador, Donald Kenneth.
Published: (2013)

An investigation into the three-dimensional force and moment characteristics of selected cuspid retraction mechanisms
by: Lack, Martin Louis.
Published: (2013)

An investigation into the three-dimensional force and moment characteristics of selected cuspid retraction mechanisms
by: Lack, Martin Louis.
Published: (2013)

Load Deflection Characteristics of Nickel Titanium Initial Archwires
by: Hossein Aghili, et al.
Published: (2016-05-01)

Comparison of Niti and TiNbTaZr Archwires During Initial Orthodontic Alignment
by: Nordstrom, Barrett Kyle
Published: (2017)

Resistance to sliding of orthodontic archwires under increasing applied moments
by: Ahmed Youssef, et al.
Published: (2020-10-01)

Study on Three-Dimensional Digital Expression and Robot Bending Method of Orthodontic Archwire
by: Jingang Jiang, et al.
Published: (2018-01-01)

Load-deflection characteristics and force levels of coated nickel titanium orthodontic archwires
by: Hind D Abaas, et al.
Published: (2015-06-01)

Clinicians' Choices in Selecting Orthodontic Archwires
by: Silvia-Izabella Pop, et al.
Published: (2013-08-01)

In-Vitro evaluation of load-deflection characteristics and force levels of nickel titanium orthodontic archwires
by: Riyadh A Ruwiaee, et al.
Published: (2015-09-01)

Comparison of two different initial archwires for tooth alignment during fixed orthodontic treatment–A randomized clinical trial
by: Shubhangi Jain, et al.
Published: (2021-01-01)

In vitro force delivery of nickel-titanium superelastic archwires in vertical displacement
by: Aisha de Souza Gomes Stumpf, et al.
Published: (2012-12-01)

Comparison of deflection forces of esthetic archwires combined with ceramic brackets
by: Murilo MATIAS, et al.
Published: (2018-02-01)

Development of a three-dimensional tillage force and moment dynamometer
by: Kitson, Charles Ivor
Published: (2013)

Development of a three-dimensional tillage force and moment dynamometer
by: Kitson, Charles Ivor
Published: (2013)

Comparison Transformation Temperature Range and Elastic Modulus in Orthodontic NiTi Archwires by 4-point Bending Tests.
by: Pei-Chun Wu, et al.
Published: (2009)

Effect of elastomeric ligatures on frictional forces between the archwire and orthodontic bracket
by: Flávia Ramos Venâncio, et al.
Published: (2015-10-01)

Evaluation of the effect of bracket and archwire composition on frictional forces in the buccal segments
by: Sajan V Nair, et al.
Published: (2012-01-01)

Evaluation on frictional forces between different sets of orthodontic brackets and archwires
by: Li-Chun Wu, et al.
Published: (2009)

Effects of three different mouthwashes on the surface characteristics of nickel-titanium and Stainless steel archwires in orthodontics
by: Maryam Omidkhoda, et al.
Published: (2017-03-01)

Modeling and Experimentation of the Unidirectional Orthodontic Force of Second Sequential Loop Orthodontic Archwire
by: Jin-Gang Jiang, et al.
Published: (2020-01-01)

Dimensional variability of orthodontic slots and archwires: an analysis of torque expression and clinical implications
by: Michele Tepedino, et al.
Published: (2020-09-01)

The Evaluation of the Initial Shear Modulus of Selected Cohesive Soils
by: Gabryś Katarzyna, et al.
Published: (2015-06-01)

Tooth and bone changes after initial anterior dental alignment using preformed vs customized nickel titanium archwires in adults: A randomized clinical trial
by: Charoemratrote, C., et al.
Published: (2018)

Assessment of pain experience in adults and children after bracket bonding and initial archwire insertion
by: Marcio José da Silva Campos, et al.
Published: (2013-10-01)

Mechanical and physical properties of orthodontic archwires
by: Alcock, Joseph Patrick
Published: (2008)

Anodization of orthodontic archwires and orthodontic miniscrews
by: Li-ling Huang, et al.
Published: (2008)

Static and kinetic frictional forces of silica-insert ceramic brackets with coated archwires in artificial saliva
by: Mostafa Shahabi, et al.
Published: (2017-01-01)

Evaluation of frictional forces between ceramic brackets and archwires of different alloys compared with metal brackets
by: Ariana Pulido Guerrero, et al.
Published: (2010-03-01)

Evaluation of the lower incisor inclination during alignment and leveling using superelastic NiTi archwires: a laboratory study
by: Carolina Baratieri, et al.
Published: (2012-06-01)

An In vitro comparative study of intrabracket width as it relates to torque between three different archwires
by: Schmitt, Terry Jay
Published: (2016)

Functional Coatings for Orthodontic Archwires—A Review
by: Justyna Bącela, et al.
Published: (2020-07-01)

OLD AND NEW BIOMATERIALS FOR ORTHODONTIC ARCHWIRES. REVIEW
by: Marius Maris, et al.
Published: (2019-10-01)

Contemporary Esthetic Orthodontic Archwires – A Review
by: Jitesh Haryani, et al.
Published: (2016-09-01)

In Vitro Corrosion Behavior of Lingual Orthodontic Archwires
by: Carlos Suárez, et al.
Published: (2011-01-01)

Finite element analysis of archwire parameters and activation forces on the M/F ratio of vertical, L- and T-loops
by: Yongqing Cai
Published: (2020-03-01)