The influence of turbine tip clearance on the flow in a rectilinear water cascade /

The influence of turbine tip clearance on the flow in a rectilinear water cascade /

Bibliographic Details
Main Author:	Pezeshkzad, Nader.
Format:	Others
Language:	en
Published:	McGill University 1979
Subjects:	Blades. Flow visualization.
Online Access:	http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=52443

Similar Items

The measurement of axial turbine tip clearance flow phenomena in a moving wall annular cascade and in a linear cascade.
Published: (2011)

Tip leakage flow in a linear turbine cascade
by: Tilton, James S.
Published: (2020)

Tip leakage loss development in a linear turbine cascade
by: Peters, David W.
Published: (2014)

Wake Behavior behind Turbine Cascades in Compressible Two-Dimensional Flows
by: Rainer Kurz
Published: (2005-01-01)

Wake Behavior behind Turbine Cascades in Compressible Two-Dimensional Flows
by: Kurz Rainer
Published: (2005-01-01)

An investigation into the development of incompressible secondary flows in high deflection turbine cascades
by: Cooke, J. A.
Published: (1976)

End-wall skin friction and secondary flow losses downstrean of a turbine blade cascade
by: Boumedmed, Abdelkader
Published: (1989)

INVESTIGATION OF COMPRESSIBLE FLOW THROUGH A TURBINE BLADE CASCADE FOR VARIOUS TRANSONIC FLOW REGIMES
by: Petr Louda, et al.
Published: (2021-02-01)

The performance of a one and a half stage axial turbine including various tip clearance effects.
by: Morphis, George.
Published: (2012)

The effect of tip clearance and tip gap geometry on the performance of a one and a half stage axial gas turbine.
by: Kaiser, Ivan.
Published: (2012)

Tip leakage losses in a linear turbine cascade
by: Dishart, Peter T.
Published: (2021)

Effects of Tip Clearance Gap and Exit Mach Number on Turbine Blade Tip and Near-Tip Heat Transfer
by: Anto, Karu
Published: (2017)

Reducing Secondary Flow Losses in Low-Pressure Turbines: The “Snaked” Blade
by: Matteo Giovannini, et al.
Published: (2019-08-01)

Analysis of the Effects of Blade Installation Angle and Blade Number on Radial-Inflow Turbine Stator Flow Performance
by: Peng Li, et al.
Published: (2018-08-01)

A Blade Defect Diagnosis Method by Fusing Blade Tip Timing and Tip Clearance Information
by: Ji-wang Zhang, et al.
Published: (2018-07-01)

Numerical study on aerothermal performance of shroud movement in the vivinity of turbine tips
by: Zhang Yunsong, et al.
Published: (2021-01-01)

Correlation between Unsteady Loading and Tip Gap Flow Occurring in a Linear Cascade with Simulated Stator-Rotor Interaction
by: Staubs, Joshua Kyle
Published: (2014)

Identification of Flow Physics in a Counter Rotating Turbine
by: R. Subbarao, et al.
Published: (2020-01-01)

Effect of the Reynolds Number and Clearance Flow on the Aerodynamic Characteristics of a New Variable Inlet Guide Vane
by: Hengtao Shi
Published: (2021-06-01)

Comparison of the Thermal Performance of Several Tip Cooling Designs for a Turbine Blade
by: Christophel, Jesse Reuben
Published: (2017)

Numerical Investigation of the Effects of Leakage Flow From Guide Vanes of Francis Turbines using Alternative Clearance Gap Method
by: S. Gautam, et al.
Published: (2020-01-01)

Research on Effects of Incidence to Turbine Guide Cascade Aerodynamic Performance
by: Jiangtao Xu, et al.
Published: (2019-01-01)

Investigating the Dehumidification Characteristics of Turbine Stator Cascades with Parallel Channels
by: Zhonghe Han, et al.
Published: (2018-09-01)

EFFECTS OF SLOTTED BLADING ON SECONDARY FLOW IN HIGHLY LOADED COMPRESSOR CASCADE
by: RAMZI MDOUKI, et al.
Published: (2013-10-01)

A Novel Intelligent Fault Diagnosis Approach for Early Cracks of Turbine Blades via Improved Deep Belief Network Using Three-Dimensional Blade Tip Clearance
by: Xin Huang, et al.
Published: (2021-01-01)

A Review of Tip Clearance in Propeller, Pump and Turbine
by: Yabin Liu, et al.
Published: (2018-08-01)

Stall Flutter of a Cascade of Blades at Low Reynolds Number
by: Jha, Sourabh Kumar
Published: (2017)

An Evaluation Testbed for Alternative Wind Turbine Blade Tip Designs
by: Gertz, Drew Patrick
Published: (2011)

An Evaluation Testbed for Alternative Wind Turbine Blade Tip Designs
by: Gertz, Drew Patrick
Published: (2011)

Impact of Boundary Layer Suction on Clearance Leakage Flow in a Cantilever Stator of Transonic Compressor
by: B. Zhang, et al.
Published: (2020-01-01)

Influence of the Tip Clearance on the Aeroelastic Characteristics of a Last Stage Steam Turbine
by: Tianrui Sun, et al.
Published: (2019-03-01)

Tip clearance and angle of attack effects upon the unsteady response of a vibrating flat plate in crossflow
by: Lewis, Daniel Russell
Published: (2014)

Development of a geometric model for the study of propagating stall inception based on flow visualization in a linear cascade
by: Piatt, Donald R.
Published: (2017)

Numerical investigation of flow unsteadiness and heat transfer on suction surface of rotating airfoils within a gas turbine cascade
by: Liang Guo, et al.
Published: (2017-06-01)

Experimental study of flow through compressor Cascade
by: Satyam Panchal, et al.
Published: (2017-09-01)

Influence of Tip Clearance on Flow Characteristics of Axial Compressor
by: Moru Song, et al.
Published: (2020-11-01)

Turbine Blade Tip External Cooling Technologies
by: Song Xue, et al.
Published: (2018-08-01)

Unsteady three-dimensional flow in a compressor cascade with inlet flow distortions
by: Farokhi, Saeed
Published: (2005)

Investigation of the formation and evolution of over-tip shock waves in the pressure-driven tip leakage flow by time-resolved schlieren visualization
by: Avital, E.J, et al.
Published: (2023)

Spanwise flow corrections for tidal turbines
by: A. Wimshurst, et al.
Published: (2018-11-01)

Cannot write session to /tmp/vufind_sessions/sess_18b7850tfustljgtk6na4ad1t7