Evaluation and comparison of mechanical and hydraulic behaviour of two engineered clay sealing materials

Evaluation and comparison of mechanical and hydraulic behaviour of two engineered clay sealing materials

Show other versions (1)

Bibliographic Details
Main Author:	Anderson, David Eric Sakari
Published:	2013
Online Access:	http://hdl.handle.net/1993/19809

Similar Items

Evaluation and comparison of mechanical and hydraulic behaviour of two engineered clay sealing materials
by: Anderson, David Eric Sakari
Published: (2013)

An investigation of the thermo/hydraulic/mechanical behaviour of unsaturated soils, including expansive clays
by: Cleall, Peter John
Published: (1998)

Effects of Hydraulic Gradient and Clay Type on Permeability of Clay Mineral Materials
by: Masanori Kohno
Published: (2020-11-01)

Development and application of new constitutive models to simulate the hydraulic-mechanical behaviour of unsaturated swelling clay
by: Priyanto Putro, Deni G.
Published: (2007)

Development and application of new constitutive models to simulate the hydraulic-mechanical behaviour of unsaturated swelling clay
by: Priyanto Putro, Deni G.
Published: (2007)

Development and application of new constitutive models to simulate the hydraulic-mechanical behaviour of unsaturated swelling clay
by: Priyanto Putro, Deni G.
Published: (2007)

Engineering behaviour and microfabrics of clays and silts
by: Saffarzadeh, Morteza
Published: (1986)

Engineering Properties of Seal Coat Material and Pavement Performance of Chip Seal
by: Ming-Da Tsai, et al.
Published: (2003)

Dynamic behaviour of rotary mechanical seals
by: Rowles, R. T.
Published: (1980)

Field evaluation of the hydraulic behaviour of rock masses for engineering purposes
by: Harper, Timothy Richard
Published: (1974)

The hydraulic conductivity and adsorptivity of clay barrier materials containing organoclay
by: Denham, William T.
Published: (2009)

The hydraulic conductivity and adsorptivity of clay barrier materials containing organoclay
by: Denham, William T.
Published: (2009)

Integral pumping rings for dual mechanical seals: hydraulic performance evaluation using numerical simulations
by: Hassan A. Ward, et al.
Published: (2020-01-01)

Analysis and design of hydraulic cylinder seals
by: Kassfeldt, Elisabet
Published: (1987)

Study of Effect of Seal Profile on Tribological Characteristics of Reciprocating Hydraulic Seals
by: S. Bhaumik, et al.
Published: (2015-06-01)

The Effect of Bottom Water Seal Friction on Engineering Behavior of Stainless Steel Hydraulic Gate
by: Shu-Hsia Wang, et al.
Published: (2017)

Tribology of the mechanical sealing interface : an evaluation of the role and potential of surface engineering
by: Jones, Gordon A.
Published: (1999)

The dynamic behavior of two-phase mechanical seals
by: Blasbalg, David A.
Published: (2007)

The dynamic stability of two-phase mechanical seals
by: Blasbalg, David A.
Published: (2007)

Mechanical Behaviour of Atrazine-Contaminated Clay
by: Mahdi Keramatikerman, et al.
Published: (2020-04-01)

Seawater as a hydraulic fluid : corrosion mechanisms and rates of engineering materials
by: Ismail, Azzura
Published: (2014)

Joint seals for hydraulic structures in severe climates
by: Jahangir Mirza
Published: (2014-03-01)

Elastohydrodynamic model of reciprocating hydraulic rod seals
by: Yang, Bo
Published: (2010)

The selection and testing of compression seal and chamber coating materials for the pivotal engine™.
by: Miller, David J
Published: (2008)

Effects of the initial granular structure of clay sealing materials on their swelling properties: experiments and DEM simulations
by: Darde Benjamin, et al.
Published: (2020-01-01)

Migration of Gas in Water Saturated Clays by Coupled Hydraulic-Mechanical Model
by: Aliaksei Pazdniakou, et al.
Published: (2018-01-01)

Impact of High Concentration Solutions on Hydraulic Properties of Geosynthetic Clay Liner Materials
by: Lei Liu, et al.
Published: (2012-11-01)

Factors Determining Operation of Lip Seal in the Sealed Gap of the Hydraulic Props of Powered Supports
by: Buyalich Gennady, et al.
Published: (2018-01-01)

Failure behaviour of two landslides in silt and clay
by: Fletcher, Lara Alexandria
Published: (2009)

Failure behaviour of two landslides in silt and clay
by: Fletcher, Lara Alexandria
Published: (2009)

IMPROVING THE RELIABILITY OF THE HYDRAULIC PART OF THE OILFIELD PUMP, TAKING INTO ACCOUNT THE SELECTION OF MATERIAL FOR THE SEAL ASSEMBLY
by: Ibrahim Abulfaz Habibov, et al.
Published: (2020-05-01)

Overview of Materials Used for the Basic Elements of Hydraulic Actuators and Sealing Systems and Their Surfaces Modification Methods
by: Justyna Skowrońska, et al.
Published: (2021-03-01)

Thermo-mechanical behaviour of clay-structure interface
by: Maghsoodi Soheib, et al.
Published: (2019-01-01)

Mechanical behaviour of unsaturated highly expansive clays
by: Sharma, Radhey Shyam
Published: (1998)

Thermo-hydro-mechanical behaviour of Kaolin clay
by: Haghighi, Ali
Published: (2011)

GROUND SEALING EQUIPMENT ON THE BASIS OF HYDRAULIC IMPACT DEVICES
by: N. S. Galdin
Published: (2017-08-01)

In-situ tests of the hydraulic performance of grout borehole seals.
by: Greer, William Bryan.
Published: (1990)

Neutron-shielding behaviour investigations of some clay-materials
by: S.F. Olukotun, et al.
Published: (2019-08-01)

Suitability of Boulder Marl and Marsh Clay as Sealing Substrates for Landfill Capping Systems—A Practical Comparison
by: Steffen Beck-Broichsitter, et al.
Published: (2018-09-01)

A catalogue of Indian Buddhist clay sealings in British museums
by: Lawson, S. D.
Published: (1982)

Cannot write session to /tmp/vufind_sessions/sess_is7ervagflv4lgpnm7sqfkgel8