Pressure drop for a two-phase flow of steam across vertical tube banks

Pressure drop for a two-phase flow of steam across vertical tube banks

Call number: LD2668 .T4 1979 H43 === Master of Science

Bibliographic Details
Main Author:	Hearn, Janice Herman.
Published:	2015
Subjects:	Two-phase flow > Mathematical models. Heat exchangers > Mathematical models. Masters theses
Online Access:	http://hdl.handle.net/2097/27083

Similar Items

Pressure Drop of a Refrigerant Flowing Vertically Upward and Downward in Small Circular, Rectangular, and Triangular Tubes
by: Koji Enoki
Published: (2021-06-01)

Modeling of blood flow in the microcirculation
by: Tessendorf, Steven D.
Published: (2015)

Two-phase pressure drop: a literature survey and correlation analysis
by: Caughron, Raymond D.
Published: (2015)

Dynamic modeling of vertical U-tube steam generators for operational safety systems
by: Strohmayer, Walter Herbert
Published: (2005)

Condensation heat transfer and pressure drop of propane in vertical minichannels
by: Murphy, Daniel Lawrence
Published: (2014)

Simulation of phase-locked loops which use a phase-frequency detector
by: Scheets, George M.
Published: (2015)

A performance model for a helically coiled once-through steam generator tube
by: Bayless, Paul David
Published: (2016)

Single phase heat transfer enhancement by doubly augmented tubes
by: Kaushik, Nanda.
Published: (2015)

Augmentation of condensation heat transfer of R-11 by internally finned tubes
by: Venkatesh, K.S.M.S.
Published: (2015)

Experimental investigation of liquid entrainment in a reactor hot-leg with a vertical branch
by: Welter, Kent B.
Published: (2012)

Supercritical gas cooling and condensation of refrigerant R410A at near-critical pressures
by: Mitra, Biswajit
Published: (2005)

Modeling and simulation of a continuous fluidized-bed dryer
by: Chen, Yiming.
Published: (2015)

Studies on the stochastic behavior of the gas-solid fluidized bed
by: Huang, Yee-Wei.
Published: (2015)

Validity of the Sondhauss equation
by: Ginter, Malaeska Milton.
Published: (2015)

Heat Transfer and Pressure Drop During Condensation of Refrigerants in Microchannels
by: Agarwal, Akhil
Published: (2007)

Optimization of composite processes and variational techniques
by: Chen, Sung-Jen.
Published: (2015)

Engineering design in reliability criterion
by: Chow, Der-Mei.
Published: (2015)

Stability improvement of the one-dimensional two-fluid model for horizontal two-phase flow with model unification
by: Abel, Kent C.
Published: (2012)

Dynamic simulation of the Fast Flux Test Facility primary system
by: Sands, Mark Richard
Published: (1981)

Statistical analysis of metal cutting data
by: Varmha, Ram.
Published: (2015)

A study of the optimization of some chemical processes
by: Wang, Chiu Sen.
Published: (2015)

Derivation of expected values of performance and activity for a multi-item inventory system
by: Stephenson, Hal Warren.
Published: (2015)

Evaluation of an evapotranspiration model for corn and sorghum
by: Steiner, Jean Louise.
Published: (2015)

Estimation of an upper bound for expected maintenance cost of a system with partially known, increasing failure rate distribution
by: Karampisheh, Kourosh.
Published: (2015)

Multiobjective decision making in water resources system
by: Chang, Yen-Tung.
Published: (2015)

Two-Phase Flow Pressure Drop Across Thick Restrictions of Annular Geometries
by: Ghandeharioun, Saeed
Published: (1982)

Analysis of the COED process and optimization of flue gas heat recovery from a second law perspective
by: Unruh, Terry Lee.
Published: (2015)

Radiation from an infinite plane to parallel rows of infinitely long tubes - hottel extended
by: Qualey, Douglas L.
Published: (2012)

Measurement of the lower explosive limit of combustible dust clouds in a 20-litre spherical chamber
by: Sidebottom, David Lee.
Published: (2015)

An experimental study on two-phase pressure drop in small diameter horizontal, downward inclined and vertical tubes
by: Autee Arun, et al.
Published: (2015-01-01)

Multi-criteria analysis and optimization of chain propagation with monomer termination polymerization in a batch reactor
by: Landis, Craig Steven.
Published: (2015)

Application of analog computers to inventory control problems
by: Aytar, Mehmet Dundar.
Published: (2015)

Theoretical analysis of a round nose tool cutting at small depths
by: Jeter, Michael Allen,1953-
Published: (2015)

Reactivity determinations in the K.S.U. graphite subcritical assembly
by: Eckoff, N. Dean(Norman),1938-
Published: (2015)

Modeling in-situ vapor extraction during flow boiling in microscale channel
by: Salakij, Saran
Published: (2013)

Two-phase experimental heat transfer studies on a water-diesel system in a shell and tube heat exchanger
by: V. Alagesan, et al.
Published: (2012-06-01)

ABOUT MATHEMATICAL MODELLING OF INFLUENCE OF STEAM PRESSURE UPON SOIL
by: G. E. Agakhanov
Published: (2016-07-01)

Developing a mathematical model for predicting total operators' wages in public transit
by: Gupta, R. K.(Raj Kumar)
Published: (2015)

A generalized three-parameter biaxial strength criterion for concrete
by: Kitterman, David L.
Published: (2015)

Numerical Study of Single Phase/Two-Phase Models for Nanofluid Forced Convection and Pressure Drop in a Turbulence Pipe Flow
by: M. Esfandiary, et al.
Published: (2016-01-01)