Effect of feed, speed, and depth of cut on the dimensional accuracy obtained for a workpiece turned on a lathe

Effect of feed, speed, and depth of cut on the dimensional accuracy obtained for a workpiece turned on a lathe

Digitized by Kansas Correctional Industries

Bibliographic Details
Main Author:	Ziada, Hassan Higazi
Language:	en_US
Published:	Kansas State University 2011
Online Access:	http://hdl.handle.net/2097/10263

Similar Items

Determination of materials and cutting conditions in a CNC lathe turning operation
by: Juan Bautista Hernández-Granados, et al.
Published: (2014-05-01)

Influence of the Cut Axial Depth on Surface Roughness at High-Speed Milling of Thin-Walled Workpieces
by: A. I. Germashev, et al.
Published: (2021-04-01)

The kinematic synthesis of lathe and analysis of its turning and cutting –off operations
by: Pei-shan Huang, et al.
Published: (2008)

Study of the Effect of the Cutting Parameters on the Dimensional Accuracy of Curved Profiles Using Swiss-Type Automatic Lathes
by: I-Hung Kuo, et al.
Published: (2009)

The effect of changes in depth of cut and cutting speed of CNC toolpaths on turning process performance
by: Jarosz Krzysztof, et al.
Published: (2018-08-01)

MODELING AND IDENTIFICATION OF INERTIAL AND DISSIPATIVE PROPERTIES OF SUBSYSTEMS OF CUTTING TOOL AND WORKPIECE IN TURNING
by: Vilor L. ZAKOVOROTNIY, et al.
Published: (2018-08-01)

MODELING AND IDENTIFICATION OF INERTIAL AND DISSIPATIVE PROPERTIES OF SUBSYSTEMS OF CUTTING TOOL AND WORKPIECE IN TURNING
by: Vilor L. ZAKOVOROTNIY, et al.
Published: (2010-12-01)

Analysis on structure strength and rigidity for CNC lathe of a simultaneous turning with multiple cutting-tool
by: Sheng-Fong Huang, et al.
Published: (2016)

Application of Multiple Regression to Thermal Errors Compensation Technology－Experiment on Workpiece Spindle of Lathe
by: You,Benfeng　, et al.
Published: (2013)

Modeling the run of a control program for turning a GTE disk compressor workpiece on a CTX Alpha 500 virtual dual-spindle CNC lathe
by: Ryazanov Aleksandr, et al.
Published: (2018-01-01)

A predictive model for the concentration of cutting fluid that escapes the cutting zone when turning a circular cylinder on a lathe
by: Bell, David Dale
Published: (2008)

An Intelligent Controller for Noncircular Cutting with Lathe
by: wei, ming-hsin, et al.
Published: (1996)

Thermoelectric cooling of a lathe cutting tool
by: Darukhanavala, Jehangir Peshotan.
Published: (2015)

Influence of turning parameters on cutting temperature by applying the design of experiments with the definition of the workpiece material behavior
by: Medina Nuria, et al.
Published: (2018-01-01)

ANALYSIS CONDITIONS FOR RELIABLE ATTACH OF WORKPIECES DURING LATHE MACHINING ON THE MASHINES WITH NUMERICAL SOFT-WARE CONTROL
by: Yury V Belousov
Published: (2017-12-01)

MODELING OF TOOL DEFORMATION OFFSETTING TO WORKPIECE IN TURNING
by: Vilor L. ZAKOVOROTNIY, et al.
Published: (2018-08-01)

MODELING OF TOOL DEFORMATION OFFSETTING TO WORKPIECE IN TURNING
by: Vilor L. ZAKOVOROTNIY, et al.
Published: (2010-11-01)

On deformation of thin-walled parts while turning on the lathes
by: E. V. Arbuzov, et al.
Published: (2014-01-01)

Methods of Optimization Coordinates the Cutting Area on Lathes
by: Sh. Ji, et al.
Published: (2015-01-01)

Intelligent Control of Constant Cutting Force in Lathe
by: Huang, Chun-Han, et al.
Published: (2004)

Study on the cutting efficiency improvement of vertical lathe
by: Hsuan-Hung,Chen, et al.
Published: (2014)

Noncircular cutting on lathe by sliding mode control
by: LIN, XIN-ZHI, et al.
Published: (1992)

Temperature rise of the workpiece in metal cutting
by: Hablanian, M. H
Published: (2012)

Fundamental Machinability Study of Metal Turning at Elevated Temperatures, and Thermal Effect on Accuracy of Hot-Machined Workpiece
by: Ichimiya, Ryoichi
Published: (2016)

Analytical modeling of a thin-walled cylindrical workpiece during the turning process. Stability analysis of a cutting process
by: Artem Gerasimenko, et al.
Published: (2017-12-01)

Chatter Analysis with Various Workpiece Sizes/Cutting Points and the Development of a Real time Chatter Suppression System in Turning
by: Yu-Chi Liao, et al.
Published: (2015)

Applying Six Sigma in Turning Process of Lathe: Case Study
by: Yen, Hsin-Hsiang, et al.
Published: (2017)

SYSTEMS FOR THE ADJUSTMENT OF THE MAIN KINEMATIC CHAIN OF THE VERTICAL TURNING LATHES
by: Dan PRODAN, et al.
Published: (2011-07-01)

Surface Texture after Turning for Various Workpiece Rigidities
by: Michal Dobrzynski, et al.
Published: (2021-01-01)

A study on the monitoring and suppression system for turning slender workpieces
by: 葉隆吉
Published: (1994)

System of cutting force data acquisition in mechanical lathes
by: Felipe Sineider Martins, et al.
Published: (2018-10-01)

ANALYSIS OF CUTTING FORCES ON CNC LATHES EXPERIMENTAL APPROACH
by: Erdem Koç, et al.
Published: (1996-01-01)

Study of An Evaluation of Surface Roughness on Cutting Workpiece
by: Huang ,Jiann Rung, et al.
Published: (1995)

Cutting Speed and Feed Influence on Surface Microhardness of Dry-Turned UNS A97075-T6 Alloy
by: Sergio Martín-Béjar, et al.
Published: (2020-02-01)

ACCURACY STUDY WHEN MACHINING SHAFT CENTRES ON LATHE
by: J. A. Mrochek, et al.
Published: (2006-06-01)

The Optimal Toolpath Planning of Milling by Considering the Depth of Workpieces
by: Yu-Chieh Chiu, et al.
Published: (2006)

Design of an Active Chatter Suppression Controller for the Turning of Slender Workpieces
by: Chih-Hung Tang, et al.
Published: (2009)

Design of an Adaptive Controller for Chatter Suppression in the Turning of Slender Workpieces
by: Ching-Hung Ho, et al.
Published: (2009)

Influence of Cutting Regime Parameters on Edge Endurance of Lathe Tool
by: Ana-Maria Budai
Published: (2014-07-01)

Noncircular cutting on lathe using voice coil motor servosystem
by: Liu, Jia Chao, et al.
Published: (1995)