PHOTOPLASTICITY APPLIED TO METAL FORMING PROBLEMS: PLANE EXTRUSION

PHOTOPLASTICITY APPLIED TO METAL FORMING PROBLEMS: PLANE EXTRUSION

COMISSÃO NACIONAL DE ENERGIA NUCLEAR === O principal objetivo deste trabalho foi avaliar de forma quantitativa a aplicação da fotoplasticidade como técnica experimental, na predição das grandes deformações plásticas que ocorrem em componentes metálicos, quando são trabalhados em processos de conform...

Full description

Bibliographic Details
Main Author:	CARLOS AUGUSTO CARPANZANO BARCELOS
Other Authors:	JOSE LUIZ DE FRANCA FREIRE
Language:	Portuguese
Published:	PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO 1986
Online Access:	http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=20640@1 http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=20640@2

Similar Items

[en] PHOTOPLASTICITY APPLIED TO METAL FORMING PROBLEMS: PLANE EXTRUSION
by: CARLOS AUGUSTO CARPANZANO BARCELOS
Published: (2012)

Physics and fabrication of metallic micro/nanoelectromechanical devices and 3-D photoplastic structures
by: Teh, Weng Hong
Published: (2004)

PHOTOPLASTICITY BEHAVIOR OF POLYESTER RESINS UNDER AND AFTER LOADING
by: JORGE DIAS LAGE
Published: (1982)

[en] PHOTOPLASTICITY BEHAVIOR OF POLYESTER RESINS UNDER AND AFTER LOADING
by: JORGE DIAS LAGE
Published: (2012)

MECHANICAL AND OPTICAL RESPONSE OF POLYESTER MODEL MATERIALS FOR THREE-DIMENSIONAL PHOTOPLASTICITY
by: RONALDO DOMINGUES VIEIRA
Published: (1982)

[en] MECHANICAL AND OPTICAL RESPONSE OF POLYESTER MODEL MATERIALS FOR THREE-DIMENSIONAL PHOTOPLASTICITY
by: RONALDO DOMINGUES VIEIRA
Published: (2018)

Spectral Dependence of the Photoplastic Effect in CdZnTe and CdZnTeSe
by: Jan Franc, et al.
Published: (2021-03-01)

Size Effects in Small Scale Forward Extrusion and Metal Forming
by: Mondal, Debabrata
Published: (2019)

Determining alternatives for metal forming lubricants: A study using plane strain cold extrusion process of JIS-A1100 pure aluminum billet
by: Nurul, M. A., et al.
Published: (2015)

Compound Extrusion Forming and Interface Microstructure of Al/Mg Dissimilar Metal
by: QIAO Ji-sen, et al.
Published: (2017-11-01)

Potential of the KOBO extrusion process for nonferrous metals in the form of solids and chips
by: Bochniak, W., et al.
Published: (2023)

On Extrusion Forging and Extrusion Rolling of Thin Metal Sheets
by: Feng, Zhujian
Published: (2013)

Extension of the forming limits of extrusion processes in sheet-bulk metal forming for production of minute functional elements
by: Pilz Florian, et al.
Published: (2020-01-01)

Analysis of Plane-Symmetric Extrusion Problem of Arbitrarily Shaped Sections using A Variational Upper-Bound Method
by: Hsu, Hsiang-Chien, et al.
Published: (1997)

Metals in zeolites : inclusion and extrusion
by: Edmondson, Michael James
Published: (2002)

Tube extrusion of hexagonal metals
by: Alevizos, Konstantinos
Published: (2010)

Elasto-plastic analysis of extrusion and stretch in metal forming process by the finite element method
by: 甯立民
Published: (1986)

Investigation of micro-pits formation on billet surfaces in plane strain extrusion
by: Izhan, I. M., et al.
Published: (2016)

The effects of the die half angle of taper die on plane strain extrusion
by: Zuan, A. M. S., et al.
Published: (2016)

Study on plane strain forward extrusion using the method of flow function
by: 詹前祥
Published: (1987)

Relaxation methods applied to problems of plane stress and strain
by: Fox, L.
Published: (1942)

The analysis of forming defects in combination extrusion
by: LI, WEN-SHUN, et al.
Published: (2018)

A friction factor found by the computer simulation of double cup extrusion is applied to an extrusion
by: han-jie Khoo, et al.
Published: (2007)

Micro-pipe Extrusion on Metal Plates
by: Chun-Kai Lin, et al.
Published: (2014)

Metal flow and homogeneity in extrusion forging
by: Hartley, P.
Published: (1979)

Extrusion of Metals, Polymers, and Food Products
Published: (2018)

Analysis of Plane-Strain Extrusion Thruogh Curved Die by Slip-Line Theory
by: Ching-Chiang Lai, et al.
Published: (1994)

Optimization Study on Rotating Extrusion Forming Applied by Deform 2D/3D FEM Software
by: Yang, Sih-Chun, et al.
Published: (2013)

Finite elements applied to problems of plane strain deformation in soils
by: Simpson, B.
Published: (1973)

Identification of forming limits of sheet metals with an in-plane biaxial tensile test
by: Song, Xiao
Published: (2018)

Measurement of Technological Properties of Materials Formed by Extrusion
by: Vladislav Pyatov, et al.
Published: (2017-08-01)

Continuous extrusion and rolling forming of copper strips
by: Yun Xinbing, et al.
Published: (2016-01-01)

Control of springback in the forming of hollow aluminium extrusions
by: Savage, Mark
Published: (2003)

The Study on the Plastic extrusion film forming process
by: CHIN-CHI HUANG, et al.
Published: (2011)

The Study of Two-step Extrusion Forming for Fasteners
by: Hsuan-Yu Lin, et al.
Published: (2015)

Effects of formulation on the forming properties during extrusion
by: Yung-Hsi Lin, et al.
Published: (2012)

Advances and Trends in Forming Curved Extrusion Profiles
by: Wenbin Zhou, et al.
Published: (2021-03-01)

A slip line field analysis for plane strain extrusion through curved die
by: Yun-Hwa Lo, et al.
Published: (1995)

Die Defects and Die Corrections in Metal Extrusion
by: Sayyad Zahid Qamar, et al.
Published: (2018-05-01)

An Analysis of Lateral Pressure of Metal Extrusion Process
by: Tsung-Hsun Tsai, et al.
Published: (2006)

Cannot write session to /tmp/vufind_sessions/sess_93nh1cacvqnkatuo09ve0cqluu