The Simulation and Study of Conditions Leading to Axial Offset Anomaly in Pressurized Water Reactors

Axial offset anomaly (AOA) in pressurized water reactors (PWR) refers to deviation of the measured neutron flux in the top half of the core from the predicted values. Among other difficulties, AOA reduces the shutdown margin, and may force the plant to reduce power output. AOA is believed to be ca...

Full description

Bibliographic Details
Main Author: Hawkes, Joshua Mahlon
Format: Others
Language:en_US
Published: Georgia Institute of Technology 2006
Subjects:
Online Access:http://hdl.handle.net/1853/7612
id ndltd-GATECH-oai-smartech.gatech.edu-1853-7612
record_format oai_dc
spelling ndltd-GATECH-oai-smartech.gatech.edu-1853-76122013-01-07T20:12:43ZThe Simulation and Study of Conditions Leading to Axial Offset Anomaly in Pressurized Water ReactorsHawkes, Joshua MahlonCorrosion product depositionBoron oxideNickel ferriteLithium tetraborateAxial Offset Anomaly (AOA)Crud Induced Power Shift (CIPS)Pressurized Water Reactor (PWR)Axial offset anomaly (AOA) in pressurized water reactors (PWR) refers to deviation of the measured neutron flux in the top half of the core from the predicted values. Among other difficulties, AOA reduces the shutdown margin, and may force the plant to reduce power output. AOA is believed to be caused by three related phenomena occurring in the core while operating at full power: sub-cooled nucleate boiling concentrated mainly in the upper half of the core, corrosion product deposition on the cladding surface (crud), and the deposition of boron within the porous crud layer in regions of vigorous sub-cooled boiling. This study replicates the conditions within the PWR primary coolant; specifically, the temperature, pressure, peak surface heat flux, coolant velocity and water chemistry are simulated in order to produce prototypical crud on an electrically heated Zircaloy-4 test element. At the conclusion of each test run, the heated Zircaloy-4 test element is rapidly isolated from the coolant in order to trap any soluble boron species that may be present in the crud layer. The results of this investigation indicate that prototypical crud with significant boron deposition can be produced. The deposited boron compound has been determined to be lithium tetraborate (Li2B4O7). Comparative experiments have been run to determine the effect of coolant pH, concentration and type of additives, and duration of exposure on the thickness of the crud deposit. The data obtained in this investigation can be used to validate mechanistic models for crud deposition and AOA in pressurized water reactors.Georgia Institute of Technology2006-01-18T22:29:16Z2006-01-18T22:29:16Z2004-12-03Thesis5734442 bytesapplication/pdfhttp://hdl.handle.net/1853/7612en_US
collection NDLTD
language en_US
format Others
sources NDLTD
topic Corrosion product deposition
Boron oxide
Nickel ferrite
Lithium tetraborate
Axial Offset Anomaly (AOA)
Crud Induced Power Shift (CIPS)
Pressurized Water Reactor (PWR)
spellingShingle Corrosion product deposition
Boron oxide
Nickel ferrite
Lithium tetraborate
Axial Offset Anomaly (AOA)
Crud Induced Power Shift (CIPS)
Pressurized Water Reactor (PWR)
Hawkes, Joshua Mahlon
The Simulation and Study of Conditions Leading to Axial Offset Anomaly in Pressurized Water Reactors
description Axial offset anomaly (AOA) in pressurized water reactors (PWR) refers to deviation of the measured neutron flux in the top half of the core from the predicted values. Among other difficulties, AOA reduces the shutdown margin, and may force the plant to reduce power output. AOA is believed to be caused by three related phenomena occurring in the core while operating at full power: sub-cooled nucleate boiling concentrated mainly in the upper half of the core, corrosion product deposition on the cladding surface (crud), and the deposition of boron within the porous crud layer in regions of vigorous sub-cooled boiling. This study replicates the conditions within the PWR primary coolant; specifically, the temperature, pressure, peak surface heat flux, coolant velocity and water chemistry are simulated in order to produce prototypical crud on an electrically heated Zircaloy-4 test element. At the conclusion of each test run, the heated Zircaloy-4 test element is rapidly isolated from the coolant in order to trap any soluble boron species that may be present in the crud layer. The results of this investigation indicate that prototypical crud with significant boron deposition can be produced. The deposited boron compound has been determined to be lithium tetraborate (Li2B4O7). Comparative experiments have been run to determine the effect of coolant pH, concentration and type of additives, and duration of exposure on the thickness of the crud deposit. The data obtained in this investigation can be used to validate mechanistic models for crud deposition and AOA in pressurized water reactors.
author Hawkes, Joshua Mahlon
author_facet Hawkes, Joshua Mahlon
author_sort Hawkes, Joshua Mahlon
title The Simulation and Study of Conditions Leading to Axial Offset Anomaly in Pressurized Water Reactors
title_short The Simulation and Study of Conditions Leading to Axial Offset Anomaly in Pressurized Water Reactors
title_full The Simulation and Study of Conditions Leading to Axial Offset Anomaly in Pressurized Water Reactors
title_fullStr The Simulation and Study of Conditions Leading to Axial Offset Anomaly in Pressurized Water Reactors
title_full_unstemmed The Simulation and Study of Conditions Leading to Axial Offset Anomaly in Pressurized Water Reactors
title_sort simulation and study of conditions leading to axial offset anomaly in pressurized water reactors
publisher Georgia Institute of Technology
publishDate 2006
url http://hdl.handle.net/1853/7612
work_keys_str_mv AT hawkesjoshuamahlon thesimulationandstudyofconditionsleadingtoaxialoffsetanomalyinpressurizedwaterreactors
AT hawkesjoshuamahlon simulationandstudyofconditionsleadingtoaxialoffsetanomalyinpressurizedwaterreactors
_version_ 1716474381064994816