The influence of aluminum salts on the retention of titanium dioxide when using cationic polyelectrolyte as a retention aid

The influence of aluminum salts on the retention of titanium dioxide when using cationic polyelectrolyte as a retention aid

Bibliographic Details
Main Author:	Proxmire, Paul R.
Format:	Others
Language:	en_US
Published:	Georgia Institute of Technology 2005
Subjects:	Titanium dioxide Addition polymerization Retention Adsorption Aluminum chloride Aluminum sulfate
Online Access:	http://hdl.handle.net/1853/5533

Similar Items

The influence of aluminum salts on the adsorption of cationic polyelectrolyte by cellulosic fibers
by: Crow, Roger D.
Published: (2005)

Biocompatibility tests performed on nanoporous aluminum oxide coated with polyethyleneglycol and titanium dioxide
by: Sandström, Patricia
Published: (2011)

An investigation of the retention of titanium dioxide on wood pulp fibers
by: Miller, Jonathan R.
Published: (2005)

Behavior of Aluminum Based Coagulants in Treatment of Surface Water–Assessment of Chemical and Microbiological Properties of Treated Water
by: Spînu (Gologan) Daniela, et al.
Published: (2014-03-01)

Comparison study of turbidity removal using synthetized poly-aluminum chloride-sulfate and poly-aluminum chloride in aqueous solutions
by: Iman Lotfi, et al.
Published: (2014-01-01)

FLAME ASSISTED CHEMICAL VAPOR DEPOSITION OF PHOTOCATALYTIC TITANIUM DIOXIDE COATING ON ALUMINUM FIN STOCK
by: Lin, Yin-Chieh
Published: (2013)

Extracting Aluminum from Aluminum Alloys in AlCl3-NaCl Molten Salts
by: Xu Junli, et al.
Published: (2013-08-01)

Hydrolysis of aluminum sulphate solutions at high temperatures
by: Nikolic, Cvetko
Published: (2011)

Colloidal characteristics of aluminum hyd roxide dispersions depending on coagulant composition and pH regulator dosing method
by: Ruslan A. Anushko, et al.
Published: (2019-02-01)

Comparison of ferric chloride and aluminum sulfate on phosphorus removal and membrane fouling in MBR treating BAF effluent of municipal wastewater
by: Xin Li, et al.
Published: (2017-12-01)

Microstructure and Mechanical Properties of Cold Sprayed Aluminum and Titanium Alloys
by: Bond, Trevor
Published: (2019)

Investigation of the Formation and Photo-activity of Titanium Dioxide and Polyelectrolytes
by: McAuley, Scott
Published: (2010)

Investigation of the Formation and Photo-activity of Titanium Dioxide and Polyelectrolytes
by: McAuley, Scott
Published: (2010)

Equilibria of aluminum chloride with hydrogen chloride in aromatic hydrocarbons /
by: Swan, Lewis Delmar
Published: (1952)

Electrodeposition of Aluminum in the 1-Ethyl-3-Methylimidazolium Tetrachloroaluminate Ionic Liquid
by: Meng Shi, et al.
Published: (2021-03-01)

The extinction by small aluminum particles from the far infrared to the vacuum ultraviolet
by: Rathmann, Janice Elaine
Published: (1981)

The electrochemical behavior of iron, copper, and nickel electrodes in sodium chloride buffered, neutral room temperature aluminum chloride : 1-methyl-3-ethylimidazolium chloride molten salt
by: Pye, Stephen L.
Published: (2006)

Hemostatic effect of aluminum chloride in liver bleeding: an animal model study
by: Saeed Nouri, et al.
Published: (2014-10-01)

SPECTROSCOPIC STUDY OF ALUMINUM PHTHALOCYANINE CHLORIDE (AlPcCl) IN HOMOGENEOUS AND MICRO-HETEROGENEOUS MEDIA CONSISTING OF P-123 AND F-127 POLYMERIC MICELLES
by: Bruno H. Vilsinski, et al.
Published: (2015-05-01)

Compounding MgCl<sub>2</sub>·6H<sub>2</sub>O with NH<sub>4</sub>Al(SO<sub>4</sub>)<sub>2</sub>·12H<sub>2</sub>O or KAl(SO<sub>4</sub>)<sub>2</sub>·12H<sub>2</sub>O to Obtain Binary Hydrated Salts as High-Performance Phase Change Materials
by: Wanchun Sun, et al.
Published: (2019-01-01)

Selection of crucible oxides in molten titanium and titanium aluminum alloys by thermo-chemistry calculations
by: Kostov A., et al.
Published: (2005-01-01)

Methods for producing permanent joints of aluminum and titanium alloys
by: B. M. Nemenenok, et al.
Published: (2020-04-01)

Synthesis and properties of thin films made from suspension on the basis of powder composite yttrium aluminum, doped with terbium
by: L. S. Khoroshko, et al.
Published: (2019-06-01)

Effect of addition agents on the properties of aluminum deposited from an aluminum chloride-sodium chloride melt
by: Charlton, Curtis S.
Published: (2015)

Dye-Sensitized Solar Cells Using Aluminum-Doped Zinc Oxide/Titanium Dioxide Photoanodes in Parallel
by: Jung-Chuan Chou, et al.
Published: (2019-09-01)

Influence of the technology of aluminum waste melting on the composition and the possibility of using the generated dust
by: L. V. Tribushevskiy, et al.
Published: (2018-10-01)

Genotoxic Effects of Aluminum Chloride and Their Relationship with N-Nitroso-N-Methylurea (NMU)-Induced Breast Cancer in Sprague Dawley Rats
by: Alejandro Monserrat García-Alegría, et al.
Published: (2020-04-01)

The Study on Mechanical Strength of Titanium-Aluminum Dissimilar Butt Joints by Laser Welding-Brazing Process
by: Xiongfeng Zhou, et al.
Published: (2019-02-01)

Investigation of the pitting of aluminum induced by chloride ions by holographic microphotography
by: Li Liang, et al.
Published: (2008-01-01)

Investigation of the pitting of aluminum induced by chloride ions by holographic microphotography
by: LIANG LI, et al.
Published: (2008-05-01)

Precipitation of aluminum (oxy)hydroxides from concentrated chloride solutions by neutralization
by: Gella, Vera.
Published: (2007)

Phosphorus removal by adsorbent based on poly-aluminum chloride sludge
by: Hui-fang Wu, et al.
Published: (2020-09-01)

KINETICS OF TRANSITION LAYER FORMATION DURING INTERACTION OF Ti-TiB WITH LIQUID ALUMINUM
by: Yana O. Smirnova, et al.
Published: (2019-05-01)

Effect of Diffusion Annealing Temperature on the Formation Process and Properties of a Carbon–Aluminum Composite Layer on Pure Titanium
by: Hongzhan Li, et al.
Published: (2019-06-01)

Etch Characteristics and Morphology of Al<sub>2</sub>O<sub>3</sub>/TiO<sub>2</sub> Stacks for Silicon Surface Passivation
by: Dongchul Suh
Published: (2019-07-01)

Impact of the design and the materials of rectangular microchannel reactors on the photocatalytic decomposition of organic pollutant
by: Charles Guillaume, et al.
Published: (2012-08-01)

Investigation of ozone and coagulant material’s (aluminum sulfate, ferric chloride, poly aluminum chloride and lime) efficiency in “Kerman Kork” industry wastewater treatment
by: Amir Hussein Javid, et al.
Published: (2015-01-01)

Study of Reaction Kinetics of titanium hydride powder with aluminum melt
by: A. Rasooli, et al.
Published: (2010-06-01)

Decreasing of Leaching and Improvement of Geopolymer Properties by Addition of Aluminum Calcium Cements and Titanium Oxide
by: Michał Łach, et al.
Published: (2020-01-01)

Kinetic and Isotherm Studies of Cadmium Adsorption on Polypyrrole/Titanium dioxide Nanocomposite
by: Marjan Tanzifi, et al.
Published: (2017-10-01)

Cannot write session to /tmp/vufind_sessions/sess_1j51ept1kp5bdgk7dmfeetccp2