Failure mechanisms in VLSI bonds subjected to mechanical and environmental stresses

Failure mechanisms in VLSI bonds subjected to mechanical and environmental stresses

Bibliographic Details
Main Author:	Maguire, Dawn Laurel
Published:	Georgia Institute of Technology 2009
Subjects:	Strength of materials Materials Fatigue
Online Access:	http://hdl.handle.net/1853/30523

Similar Items

Failure mechanisms and prediction in advanced composite materials
by: Parnas, Levend
Published: (2008)

Experimental aspects and mechanical modeling paradigms for the prediction of degradation and failure in nanocomposite materials subjected to fatigue loading conditions
by: Averett, Rodney Dewayne
Published: (2008)

Literature review on the mechanical properties of materials after surface mechanical attrition treatment (SMAT)
by: Temitope Olumide Olugbade, et al.
Published: (2020-03-01)

Effect of specimen geometry on creep crack growth rate behavior in 1 Cr-1Mo-25V steel
by: Gupta, Kiriti
Published: (2008)

PREREQUISITES TO UNCOVERING THE REGULARITIES OF THE FATIGUE RESISTANCE OF ANCHORAGE OF CURTAIN WALL SYSTEMS
by: Alisultanov Ramidin Semedovich, et al.
Published: (2016-04-01)

Characterization of mechanical and fatigue properties for a hybrid titanium composite laminate
by: Li, Edward
Published: (2008)

Characterising the stress-life response of mechanical and laser formed titanium components
by: Fidder, Herman
Published: (2012)

On couple stress in the mechanics of materials
by: Ellis, Robert William
Published: (2021)

Mechanics and mechanisms of creep-fatigue crack growth in Cu-1 wt% Sb
by: Gieseke, Brian G.
Published: (2008)

On the initiation and propagation of fatigue cracks in WC-Co
by: Erling, Ghita
Published: (2017)

The effects of powder metallurgical processing and intermediate thermal mechanical treatment on the fatigue properties of high strength aluminum alloys, X7091
by: Kuo, Victor Wei-Chung
Published: (2006)

Post failure energy absorbing mechanisms of filament wound composite tubes
by: Keal, R.
Published: (1983)

Residual Stress Distribution Changes During Dynamic Unidirectional Tensile Loading
by: Todd, Henry Swan
Published: (1965)

Creep-fatigue crack growth behavior of 1%Cr-1%Mo-1/4%V rotor steel
by: Adefris, Negussie Belihu
Published: (2007)

Analysis of fatigue crack properties of the weld metal of gas metal Arc welded 300WA steel
by: February, Eugene J
Published: (2012)

On the determination of the failure surfaces for an orthotropic quasi-homogeneous material
by: Kaminski, Benjamin Eugene
Published: (2007)

Investigation of transfer bond in pretensioned prestresses concrete members by an original method
by: Taylor, Peter Ridgway
Published: (2011)

Mechanics of Fiber-Controlled Behavior in Polymeric Composite Materials
by: Case, Scott Wayne
Published: (2014)

Characterising the stress-life response of mechanical formed AISI-1008 steel plate components
by: Müller, Ruan
Published: (2012)

Fracture mechanics parameters for cracks on non-planar interfaces
by: Yang, Lin
Published: (2007)

Research of Mechanical Properties of Piping Yards in the Assessment of their Safe Operation
by: Trebuňa, F., et al.
Published: (2007-01-01)

Fatigue damage mechanisms of advanced hybrid titanium composite laminates
by: Rhymer, Donald William
Published: (2008)

MODELS OF FATIGUE LIFE CURVES IN FATIGUE LIFE CALCULATIONS OF MACHINE ELEMENTS – EXAMPLES OF RESEARCH
by: Grzegorz SZALA, et al.
Published: (2014-03-01)

The statistical analysis of fatigue data.
by: Shen, Chi-liu.
Published: (1994)

Damage and failure modeling of lotus-type porous material subjected to low-cycle fatigue
by: J. Kramberger, et al.
Published: (2015-12-01)

Mechanical properties of materials used for temporary fixed dentures – in vitro study
by: Celej-Piszcz Elzbieta, et al.
Published: (2017-06-01)

EVALUATION OF ASSUMPTIONS IN FITNET FATIGUE LIFE CALCULATIONS – CHOSEN PROBLEMS
by: Bogdan LIGAJ, et al.
Published: (2014-06-01)

SOURCES OF DIFFERENCES IN CALCULATIONS AND EXPERIMENTAL TEST RESULTS OF FATIGUE LIFE OF STRUCTURAL ELEMENTS
by: Józef SZALA, et al.
Published: (2014-06-01)

Damage and failure modeling of lotus-type porous material subjected to low-cycle fatigue
by: J. Kramberger, et al.
Published: (2016-01-01)

Cyclodextrin as sizing for carbon fibers: new bonding mechanism improves adhesion in carbon fiber reinforced epoxy resin
by: Anna Becker-Staines, et al.
Published: (2020-04-01)

Investigation of progressive damage and failure in IM7 carbon fiber/5250-4 bismaleimide resin matrix composite laminates
by: Etheridge, George Alexander
Published: (2008)

Failure processes in unidirectional composite materials
by: Sundaresan, Mannur J.
Published: (2017)

Near tip stress and strain fields for short elastic cracks
by: Soediono, Andy H.
Published: (2008)

Crack path determination for non-proportional mixed-mode fatigue
by: Highsmith, Shelby, Jr.
Published: (2009)

Microbeam diffraction mapping of microtexture in Al-Li 2090 T8E41
by: Haase, Jake D.
Published: (2008)

Repair bond strength and degradation of glass ionomer cements after mechanical and chemical challenges
by: Leandro Rahal Mestrener, et al.
Published: (2020-05-01)

Growth-arrest behavior of small fatigue cracks
by: Steadman, David Lawrence
Published: (2006)

The effect of temperature, microstructure and stress state on the low cycle fatigue behavior of waspaloy
by: Stahl, Douglas Ray
Published: (2006)

The effect of debond growth on crack propagation in composite plates reinforced with adhesively bonded composite stringers
by: Bigelow, Catherine Ann
Published: (2008)

Fatigue performance of nanoclay filled glass fiber reinforced hybrid composite laminate
by: Olusanya, John Olumide
Published: (2017)