Precipitation of dispersoids in aluminum alloys

Precipitation of dispersoids in aluminum alloys

Bibliographic Details
Main Author:	Last, Howard R.
Published:	Georgia Institute of Technology 2008
Subjects:	Aluminum alloys Colloids
Online Access:	http://hdl.handle.net/1853/19895

Similar Items

Al₃(Sc₁₋x, Zrx) dispersoids in aluminum alloys : coarsening and recrystallization control
by: Riddle, Yancy Willard
Published: (2008)

Solute interaction effects on the precipitation behavior of the [alpha]-Al(Mn,Fe)Si dispersoid phase in dilute aluminum alloys
by: Baxter, Nathan Eric
Published: (2007)

The role of alloy composition and cooling rate from the melt on the dispersoid distribution in AA 6013
by: Conte-Matos, Augusto
Published: (2008)

The relationship of microstructure to monotonic and cyclic straining in two aluminum-zinc-magnesium precipitation hardening alloys
by: Sanders, Thomas Henry B.
Published: (2006)

PRECIPITATION-HARDENING CHARACTERISTICS OF TERNARY COBALT - ALUMINUM - X ALLOYS
by: Lee, Charles Samuel, 1933-
Published: (1971)

Casting conditions and iron variant effects on the subsequent nucleation of Al₂₀Cu₂Mn₃ dispersoid phase in Al-4Cu-0.4Mn-0.2Si alloys
by: Nemeth, Bill
Published: (2008)

Strengthening mechanisms in aluminum alloys
by: Sahoo, Maheswar
Published: (2011)

Friction Stir Welding of High Strength Precipitation Strengthened Aluminum Alloys
by: Sidhar, Harpreet
Published: (2016)

The effect of primary silicon refinement on the microstructure and properties of hypereutectic aluminum-silicon alloys.
by: Wootton, George Claude
Published: (2011)

A study of the effect of thickness on fatigue strength of 24S-T3 aluminum alloy sheet
by: Duchacek, Howard
Published: (2006)

THERMALLY-ACTIVATED SERRATED YIELDING IN SELECTED ALUMINUM ALLOYS
by: Clough, Roger B.
Published: (1967)

Investigation of the Precipitation Behavior in Aluminum Based Alloys
by: Khushaim, Muna S.
Published: (2015)

A study of fatigue and corrosion fatigue for 24ST aluminum alloy sheet
by: Cliett, Charles Buren
Published: (2006)

Surface and subsurface deformation of aluminum and aluminum alloys in dry sliding wear /
by: Kuo, Shun-meen
Published: (1987)

Precipitation of dispersoids in Al–Mg–Si alloys with Cu addition
by: Fang-Zhen Liu, et al.
Published: (2021-09-01)

Aging Characteristics of Aluminum-Silver Alloys
by: Reynolds, Paul L.
Published: (1974)

Stacking-fault probability in aluminum alloys
by: Cotter, Keyren Harrison, 1941-
Published: (1967)

Aging precipitation behavior of 800 MPa grade ultra high strength aluminum alloy
by: ZANG Jin-xin, et al.
Published: (2021-04-01)

Characterization of Precipitation in 7055 Aluminum Alloy by Laser Ultrasonics
by: Zhenge Zhu, et al.
Published: (2021-02-01)

Strontium dissolution in liquid aluminum and A356 alloys
by: Pekgüleryüz, Mihriban Özden
Published: (1987)

Crevice corrosion in aluminum alloys
by: Green, Leon Clifton
Published: (2006)

Effects of Manganese and Zirconium Dispersoids on Strain Localization in Aluminum Alloys
by: Elena Jover Carrasco, et al.
Published: (2021-01-01)

Superplasticity in a dilute zinc aluminum alloy
by: Cook, Richard Charles
Published: (2011)

Recrystallization resistance in aluminum alloys containing zirconium
by: Ranganathan, Kannan
Published: (2008)

THE INFLUENCE OF TEMPERATURE ON THE ALUMINUM ALLOYS
by: Andrei DIMITRESCU, et al.
Published: (2013-05-01)

The effect of intermediate thermomechanical treatments on the fatigue properties of two 7XXX aluminum alloys
by: Sanders, Robert Edward
Published: (2006)

Extracting Aluminum from Aluminum Alloys in AlCl3-NaCl Molten Salts
by: Xu Junli, et al.
Published: (2013-08-01)

Primary and secondary porosity in sandcast aluminum-silicon alloys
by: Dimayuga, Francisco Cruz, II.
Published: (1981)

Dissolution kinetics of powder alloy compacts in liquid aluminum
by: Kadoglou, Antonios Z.
Published: (1983)

Low cycle corrosion fatigue and corrosion fatigue crack propagation of high strength 7000-type aluminum alloys
by: Lin, Fu-Shiong
Published: (2006)

Shrinkage and microstructure in zinc-aluminum alloys
by: Wilms, Ulrich H.
Published: (2007)

Ultrasonically assisted machining of aluminum alloy
by: Pastour, Fabien Christian
Published: (2007)

The effect of an intermediate thermomechanical treatment on the fatigue properties of I/M X7091 aluminum alloy
by: Chang, Hao
Published: (2006)

Process-Structure-Property Relationships in Friction Stir Welded Precipitation Strengthened Aluminum Alloys
by: Mondal, Barnali
Published: (2019)

APPLICATION OF ALUMINUM AND ALUMINUM ALLOYS IN ENGINEERING
by: Blaza Stojanovic, et al.
Published: (2018-06-01)

Hydrogen embrittlement of Aluminum-Lithium alloys
by: Rivet, Frederic C.
Published: (2014)

Mechanical properties of friction stir welded aluminum alloys 5083 and 5383
by: Jeom Kee Paik
Published: (2009-09-01)

A study of stress corrosion and corrosion fatigue of aluminum alloys
by: Rivers, Robert Howell
Published: (2006)

Application of limit design to high-strength aluminum alloy beams
by: Allen, David Elliott
Published: (2011)

Application of limit design to high-strength aluminum alloy beams
by: Katramadakis, Tony
Published: (2011)

Cannot write session to /tmp/vufind_sessions/sess_7h5pejch7apqlkgfjhgs684iud