The effect of temperature and microstructure on the fatigue crack growth behavior of AL-Cu alloy C415

The effect of temperature and microstructure on the fatigue crack growth behavior of AL-Cu alloy C415

Bibliographic Details
Main Author:	Muhlstein, Christopher L.
Published:	Georgia Institute of Technology 2008
Subjects:	Image processing Digital techniques Silicon Silicon Stress corrosion
Online Access:	http://hdl.handle.net/1853/19466

Similar Items

The Comparison of the Microstructure and Corrosion Resistance of Sand Cast Aluminum Alloys
by: Dobkowska A., et al.
Published: (2016-03-01)

CMZP and Mg-doped Al2TiO5 Thin film Coatings for High Temperature Corrosion Protection of Si3N4 Heat Exchangers
by: Nguyen, Thierry Huu Chi
Published: (2014)

Crack initiation and early propagation behavior of AlSi10Mg(Cu) cast alloy under thermal fatigue
by: ZHOU Hang, et al.
Published: (2019-03-01)

Fatigue reliability predictions in silicon nitride ceramics based on fatigue behavior, bridging stresses and fracture data
by: Greene, Rawley Brandon
Published: (2013)

Evolution of the Eutectic Microstructure in Chemically Modified and Unmodified Al-Si Alloys
by: Guthy, Hema Vardhan
Published: (2002)

Effect OF SI and AL on the Microstructure, Mechanical Properties and Machinability of 65CU-35ZN Brass
by: M. Adineh, et al.
Published: (2019-06-01)

Corrosion Behavior of Nanocomposite Al-9 wt% Si Alloy Reinforced with Carbon Nanotubes
by: Mustafa K. Ismeal, et al.
Published: (2017-03-01)

Nano-mechanical Behaviour and Microstructural Evolution of Cu/Si Thin Films at Different Annealing Temperatures
by: Woei-Shyan Lee, et al.
Published: (2012-07-01)

Investigation of Laser Surface Treatment on the Microstructure and Mechanical Properties of AlSiMn Alloy
by: Moera Gutu, et al.
Published: (2020-01-01)

Effect of Si Content on the Corrosion Behavior of 420 MPa Weathering Steel
by: Rui Sun, et al.
Published: (2019-04-01)

HYDROTHERMAL CORROSION RESISTANCE OF SILICON NITRIDE WITH O'-Si Al ON GRAIN BOUNDARY PHASE
by: Michal Vetrecin, et al.
Published: (2018-10-01)

Filmes de silicona constituidos de unidades D,T e Q de silicio : obtenção, caracterização e avaliação de algumas propriedades
by: Deangelo, Cristina Alves
Published: (2004)

Effect of electric current on the cast microstructure of Al-Si alloy
by: Guangming XU, Jiawei ZHENG, Yong LIU, Jianzhong CUI
Published: (2005-08-01)

The Compatibility of Three Silicone Oils with Polydimethylsiloxane and the Microstructure and Properties of Their Composite Coatings
by: Yuguo Jiang, et al.
Published: (2021-07-01)

Effects of scandium and silicon addition on the microstructure and mechanical properties of Ti-6Al-4V alloy
by: Tongsheng Deng, et al.
Published: (2020-05-01)

Low Cost Fabrication of Si NWs/CuI Heterostructures
by: Maria José Lo Faro, et al.
Published: (2018-07-01)

The initiation and growth of fatigue cracks in titanium alloys
by: Brown, C. W.
Published: (1981)

Microstructural development and pressure requirements in 6063 aluminium alloy tube extrusion
by: Nisarantaraporn, Ekasit
Published: (1995)

Effect of Ca addition on solidification microstructure of hypoeutectic Al-Si casting alloys
by: Xiang-yi Jiao1, et al.
Published: (2019-05-01)

Two phase microstructure cycling of porous silicon active materials
by: Jake Entwistle
Published: (2020-05-01)

TOPICAL REVIEW: Corrosion resistance of Si–Al-bearing ultrafine-grained weathering steel
by: Toshiyasu Nishimura
Published: (2008-01-01)

Wear Characteristics of Recycled Cast Al-6Si-3Cu Alloys
by: F.M. Mwema, et al.
Published: (2019-12-01)

An FPGA-based silicon neuronal network with selectable excitability silicon neurons
by: Jing eLi, et al.
Published: (2012-12-01)

Growth modification and characterization of silicon based materials.
Published: (1995)

Subcritical crack growth in oxide and non-oxide ceramics using the Constant Stress Rate Test
by: Agnieszka Wojteczko, et al.
Published: (2015-12-01)

Influence of chemical composition on the conductivity and on some mechanical properties of Mg-doped Cu-Si alloy
by: Kingsley C. Nnakwo, et al.
Published: (2020-07-01)

Spark Plasma Sintering of Low Alloy Steel Modified with Silicon Carbide
by: Hebda M., et al.
Published: (2016-06-01)

Fatigue crack growth in a low-alloy steel
by: Musuva, J. K.
Published: (1980)

Porous silicon thin films : a study of their optical properties and growth mechanism
by: Riley, David Washington
Published: (2008)

Characterization Of Al-Si Alloy Engine Bores For Tribological Studies
by: Vijayalakshmi, S R
Published: (2013)

Influence of frequency and environment on the fatigue behavior of monocrystalline silicon thin films
by: Theillet, Pierre-Olivier
Published: (2010)

The influence of environment, stress-ratio and microstructure (strength) on the fatigue crack growth behaviour of a low alloy steel
by: Bulloch, J. H.
Published: (1982)

The microstructural investigation of continuous-wave laser irradiated silicon rich silicon oxide
by: Wang, Nan
Published: (2017)

Interfacial Studies of Bimetallic Corrosion in Copper/Ruthenium Systems and Silicon Surface Modification with Organic and Organometallic Chemistry
by: Nalla, Praveen Reddy
Published: (2006)

Low temperature growth of Amorphous Silicon thin film.
by: Malape, Maibi Aaron.
Published: (2007)

Low temperature growth of Amorphous Silicon thin film.
by: Malape, Maibi Aaron.
Published: (2007)

Low temperature growth of Amorphous Silicon thin film
by: Malape, Maibi Aaron
Published: (2013)

Small fatigue crack growth in high strength aluminium alloys
by: Zhang, Y. H.
Published: (1992)

Analysis of SiC grain size variation and NaCl concentration on the corrosion susceptibility of AA1070 aluminium matrix composites
by: Roland Tolulope Loto, et al.
Published: (2018-01-01)

A Study on the Effect of Ultrafine SiC Additions on Corrosion and Wear Performance of Alumina-Silicon Carbide Composite Material Produced by SPS Sintering
by: Ntebogeng F. Mogale, et al.
Published: (2020-10-01)