The mechanism of separation in the louver type dust separator

The mechanism of separation in the louver type dust separator

Bibliographic Details
Main Author:	Smith, Joseph Leconte
Published:	Georgia Institute of Technology 2007
Subjects:	Dust Removal
Online Access:	http://hdl.handle.net/1853/17927

Similar Items

Effect of blade design in the louver type dust separator
by: Ogle, Joseph Alva
Published: (2007)

An initial study of a louvre type dust separator
by: Harwell, Charles William
Published: (2008)

A two dimensional study of a louvre type dust separator
by: Matheson, James Carl
Published: (2007)

Chemical separation of industrial dusts in electrostatic precipitators
by: Ali, Omar Feroze.
Published: (1982)

Efficiency of fog-type dust collectors at low dust loadings
by: Kernan, Charles Reynolds
Published: (2007)

Variables affecting the performance of a fog-type dust collector
by: Brian, Ben Frank
Published: (2008)

Factors affecting the efficiency of a wet type dust collector
by: Stewart, Robert Earl
Published: (2012)

A study of the effect of different concentrations of air borne dust on the efficiency of a model precipitron
by: Smith, Harry Beaman
Published: (2007)

Absolute efficiency of electrostatic precipitation for collection of siliceous dust
by: Wilson, Earl Chastain
Published: (2007)

Creation of Wood Dust during Wood Processing: Size Analysis, Dust Separation, and Occupational Health
by: Eva Mračková, et al.
Published: (2015-11-01)

Change in dust collection efficiency of liquid collectors in conditions of dedusting liquid recirculation
by: Krawczyk Janusz
Published: (2017-12-01)

The effect of vortex finder heights on separation efficiency of dust cyclone
by: Suthin Pholboorn
Published: (2016-06-01)

Selective Separation of Arsenic from Lead Smelter Flue Dust by Alkaline Pressure Oxidative Leaching
by: Wei Liu, et al.
Published: (2019-05-01)

The Study of Dust Removal Using Electrostatic Cleaning System for Solar Panels
by: Murat Altıntaş, et al.
Published: (2021-08-01)

Forest Roles in Particle Removal during Spring Dust Storms on Transport Path
by: Wenjun Wei, et al.
Published: (2020-01-01)

Evaluation of wet dust separator effectiveness in the dedusting of emissions from expanded clay kiln
by: S.A. Koshkarev, et al.
Published: (2015-03-01)

Separation of ZnO from the Stainless Steelmaking Dust and Graphite Mixture by Microwave Irradiation
by: Zhou Yun, et al.
Published: (2015-04-01)

The evaluation of dust in a swine barn and its relation to heat exchanger application.
by: Avey, Hugh Reginald.
Published: (1970)

Efficiency test of the dust collector on No.6 boiler in the V.P.I. power plant
by: Truitt, James Linford
Published: (2014)

Application and Research of Swirling Curtain Dust Collection Technology in Mines
by: Gang Li, et al.
Published: (2020-03-01)

Study of a Hydrogen Inhibition Method with Sodium Tungstate for Wet Aluminum Dust Removal Systems
by: Bohan Zhang, et al.
Published: (2020-04-01)

Gas-dust flow separation in a centrifugal inertial dust catcher in terms of ecological-economic approach
by: Ya. V. Chistyakov, et al.
Published: (2012-06-01)

Hydrometallurgical Leaching of Copper Flash Furnace Electrostatic Precipitator Dust for the Separation of Copper from Bismuth and Arsenic
by: Michael Caplan, et al.
Published: (2021-02-01)

METHODS AND MEANS OF AUTOMATIC CONTINUOUS MONITORING OF DUST CONCENTRATION AND DUST CONTROL IN THERMAL POWER PLANTS OPERATING ON COAL
by: Artushin I.A., et al.
Published: (2017-12-01)

Efficiency characteristic of electrostatic dust precipitation using solar energy
by: Xu Lin, et al.
Published: (2020-01-01)

Recycling of steelmaking dusts: The Radust concept
by: Jalkanen H., et al.
Published: (2005-01-01)

Transport of Mineral Dust and Its Impact on Climate
by: Kerstin Schepanski
Published: (2018-04-01)

Study of mechanisms of grain dust explosion as affected by particle size and composition / by David Wayne Garrett.
by: Garrett, David Wayne
Published: (2011)

Efficiency of Brick Dust and Powdered Ceramsite in the Phosphorus Removal from Wastewater
by: Adam Andrzej Masłoń, et al.
Published: (2020-02-01)

Identification of the exploatation dust in road dust
by: B. Gajdzik, et al.
Published: (2012-01-01)

Evaluation of the effectiveness of coal and mine dust wetting
by: Krzysztof Cybulski, et al.
Published: (2015-01-01)

METHODS OF DUST CAKE REMOVAL FROM COLLECTING PLATES IN ELECTROSTATIC PRECIPITATORS (ESP)
by: Monika Wierzbińska, et al.
Published: (2014-10-01)

Arsenic Removal from Arsenopyrite-Bearing Iron Ore and Arsenic Recovery from Dust Ash by Roasting Method
by: Rijin Cheng, et al.
Published: (2019-10-01)

Assessing the effectiveness of inertization of brown coal dust with limestone rock dust
by: Marković Jelena, et al.
Published: (2017-01-01)

Synergistic removal of dust using the wet flue gas desulfurization systems
by: Qirong Wu, et al.
Published: (2019-07-01)

Application of anthracite dust in the processing of steel dusts
by: M. Niesler, et al.
Published: (2022-01-01)

Wasatch Front Atmospheric Deposition Reflects Regional Desert Dust and Local Anthropogenic Sources
by: Goodman, Michael Max
Published: (2019)

Experimental study of coal dust deposition in mine workings with the use of empirical models
by: Dariusz Prostański
Published: (2015-01-01)

Centrifugal separation experimentation and optimum predictive model development for copper recovery from waste copper smelter dust
by: Daniel Okanigbe, et al.
Published: (2018-01-01)

A Review on Dust Activities in Iran and Parameters Affecting Dust Accumulation on Photovoltaic Panels
by: Aslan Gholami, et al.
Published: (2021-09-01)