The ablation of slip-cast silica

The ablation of slip-cast silica

Bibliographic Details
Main Author:	Willbanks, Charles Everage
Published:	Georgia Institute of Technology 2007
Subjects:	Ablation (Aerothermodynamics) Silica
Online Access:	http://hdl.handle.net/1853/17234

Similar Items

Ablation onset in unsteady hypersonic flow about nose-tips with a forward-facing cavity
by: Silton, Sidra Idelle, 1973-
Published: (2011)

Studies of ablation and run-off on an Arctic glacier.
by: Adams, W. Peter
Published: (1966)

Numerical Analysis of Transient Teflon Ablation in Pulsed Plasma Thrusters
by: Stechmann, David Paul
Published: (2007)

An analysis of the spallation of carbon phenolic ablators
by: O'Hare, Brian J.
Published: (2016)

Modeling of near infrared laser-mediated plasmonic heating with optically tunable gold nanoparticles for thermal therapy
by: Reynoso, Francisco J.
Published: (2013)

Radiation and ablation studies for in-flight validation
by: Bailet, Gilles
Published: (2019)

Three dimensional finite element ablative thermal response analysis applied to heatshield penetration design
by: Dec, John A.
Published: (2011)

Développement de méthodes numériques et étude des phénomènes couplés d’écoulement, de rayonnement, et d’ablation dans les problèmes d’entrée atmosphérique
by: Scoggins, James
Published: (2017)

Numerical approach to ablation measurements using a new plasma pre-heating technique
by: Daniel Odion Iyinomen
Published: (2020-02-01)

THE TRANSITION FROM THE TURBULENT TO THE LAMINAR REGIME FOR INTERNAL CONVECTIVE FLOW WITH LARGE PROPERTY VARIATIONS
by: Coon, Carlos Weldon, 1938-
Published: (1968)

Development of compressive surface stresses in slip-cast fused silica
by: Ormsby, Phillip Arthur
Published: (2006)

SERS active Ag–SiO2 nanoparticles obtained by laser ablation of silver in colloidal silica
by: Cristina Gellini, et al.
Published: (2018-09-01)

Influence of MHz bursts on the ablation efficiency of fused silica
by: Esen, C., et al.
Published: (2023)

Spatial and Temporal Variability of Glacier Melt in the McMurdo Dry Valleys, Antarctica
by: Hoffman, Matthew James
Published: (2011)

Contribution à la modélisation de la rentrée atmosphérique des débris spatiaux
by: Prévereaud, Ysolde
Published: (2014)

The artificially blunted leading edge concept for aerothermodynamic performance enhancement
by: Gupta, Anurag
Published: (2006)

Boundary layer separation control and wall temperature control by tangential fluid injection /
by: Haering, George William
Published: (1968)

Development of an LU-scheme for the solution of hypersonic non-equilibrium flow
by: Zoebelein, Till
Published: (2006)

Probalistic vibration analysis of nearly periodic structures
by: Studebaker, Karen F.
Published: (2014)

Analyse aérothermodynamique de l'entrée atmosphérique d'un géocroiseur à occurence séculaire
by: Ferrier, Loïc
Published: (2012)

Advances in Laser Ablation Synthesized Silicon-Based Nanomaterials for the Prevention of Bacterial Infection
by: Marina Martínez-Carmona, et al.
Published: (2020-07-01)

Analysis of differential diffusion phenomena in high enthalpy flows, with application to thermal protection material testing in ICP facilities
by: Rini, Pietro
Published: (2006)

Characterization of a Transitional Hypersonic Boundary Layer in Wind Tunnel and Flight Conditions
by: Tirtey, Sandy C
Published: (2009)

A theoretical treatment of technical risk in modern propulsion system design
by: Roth, Bryce Alexander
Published: (2006)

An experimental and numerical convective heat transfer analysis over a transonic gas turbine rotor blade.
by: Cassie, Keith Baharath.
Published: (2011)

Parametric Analysis of a Hypersonic Inlet using Computational Fluid Dynamics
Published: (2013)

Study of silica-based intrinsically emitting nanoparticles produced by an excimer laser
by: Imène Reghioua, et al.
Published: (2019-01-01)

Aerothermodynamic Shape Optimization for Re-entry Capsule Using Genetic Algorithms
by: Ionut BUNESCU, et al.
Published: (2019-12-01)

Aerodynamic design, analysis, and validation of a supersonic inflatable decelerator
by: Clark, Ian Gauld
Published: (2010)

Modification of a Phenolic Resin with Epoxy- and Methacrylate-Functionalized Silica Sols to Improve the Ablation Resistance of Their Glass Fiber-Reinforced Composites
by: Yu Hu, et al.
Published: (2014-01-01)

An Iterative Method to Derive the Equivalent Centrifugal Compressor Performance at Various Operating Conditions: Part II: Modeling of Gas Properties Impact
by: Waleed Albusaidi, et al.
Published: (2015-08-01)

Nonlinear finite element analysis of a laminated composite plate with nonuniform transient thermal loading
by: Fronk, Thomas Harris
Published: (2014)

A refined investigation of the viscosity of supercritical steam
by: Willbanks, Charles Everage
Published: (2007)

Percutaneous lung and liver CT-guided ablation on swine model using microwave ablation to determine ablation size for clinical practice
by: Paul Habert, et al.
Published: (2021-01-01)

Effects of Ablation Angle on the Ablation Behavior of C/C Composites
by: ZHA Bai-lin, et al.
Published: (2017-02-01)

SU2-NEMO: An Open-Source Framework for High-Mach Nonequilibrium Multi-Species Flows
by: Walter T. Maier, et al.
Published: (2021-07-01)

Modificação da molhabilidade da celulose por processos subsequentes de ablação e deposição a plasma
by: Camargo, Janine Sanches Gonzaga de
Published: (2017)

Comparison between cryoballoon ablation and radiofrequency catheter ablation for atrial fibrillation in patients on hemodialysis
by: Takahiro Hayashi, et al.
Published: (2021-03-01)

Analysis of differential diffusion phenomena in high enthalpy flows, with application to thermal protection material testing in ICP facilities
by: Rini, Pietro
Published: (2006)

Study of Design Modification Effects through Performance Analysis of a Legacy Gas Turbine Engine
by: Gantayata Gouda, et al.
Published: (2020-03-01)

Cannot write session to /tmp/vufind_sessions/sess_3ccve0us7i468d9h5sjcq3h84h