Fundamentals of area array solder interconnect yield

Fundamentals of area array solder interconnect yield

Bibliographic Details
Main Author:	Kim, Chunho
Published:	Georgia Institute of Technology 2007
Subjects:	Solder and soldering Electronic packaging Materials Interconnect (Integrated circuit technology)
Online Access:	http://hdl.handle.net/1853/16479

Similar Items

Fundamentals of solder interconnect wetting
by: Kang, Suk Chae
Published: (2007)

Flip chip processing of lead-free solders and halogen-free high density microvia substrates
by: Baynham, Grant Andrew
Published: (2008)

Observation and modeling of heterogeneous microstructural evolution in Sn-Pb solder
by: Woodmansee, Michael W.
Published: (2007)

Thermo-mechanical reliability of the VSPA package solder joints
by: Murphy, R. Sean
Published: (2007)

Damage metric-based thermal cycling guidelines for area-array packages used in harsh thermal conditions
by: Pyland, James
Published: (2007)

System implementation, modeling and defects pattern recognition for flip chip solder joint inspection using laser techniques
by: Liu, Sheng
Published: (2007)

Processing and Characterization of Device Solder Interconnection and Module Attachment for Power Electronics Modules
by: Haque, Ashim Shatil
Published: (2014)

Processing of NITI reinforced adaptive solder for electronic packaging
by: Wright, William L.
Published: (2012)

Quality inspection and reliability study of solder bumps in packaged electronic devices: using laser ultrasound and finite element methods
by: Yang, Jin
Published: (2009)

Implementation and qualification of a prototype tester for reflow soldering process compatability evaluation of surface mount technology components
by: Wong, Anthony Yin-bong
Published: (2011)

Study of polyarylene ether and its application in isotropically conductive adhesive
by: Liong, Silvia
Published: (2008)

Editorial: Novel Materials for Green Soldering and Brazing
by: M. A. Fazal, et al.
Published: (2021-09-01)

Surface properties and solderability behaviors of nickel-phosphorous and nickel-boron deposited by electroless plating.
Published: (2000)

A Study of the Processing Properties of Hard-Particle Reinforced Composite Solders
by: Calderon, Jose Guadalupe
Published: (1994)

Diffusion Kinetics and Microstructure of Eutectic and Composite Solder/Copper Joints
by: Wu, Yujing
Published: (1994)

PHYSICAL ASPECTS OF LOW TEMPERATURE SOLDERING WITH GA-SOLDERS
by: A. A. CHULARIS, et al.
Published: (2018-07-01)

PHYSICAL ASPECTS OF LOW TEMPERATURE SOLDERING WITH GA-SOLDERS
by: A. A. CHULARIS, et al.
Published: (2010-04-01)

Soldering of Passive Components Using Sn Nanoparticle Reinforced Solder Paste: Influence on Microstructure and Joint Strength
by: Anas M. Atieh, et al.
Published: (2019-10-01)

Processing and Reliability Assessment of Solder Joint Interconnection for Power Chips
by: Liu, Xingsheng
Published: (2014)

Finite element analysis of printed wiring board deformations during thermal cycles involved in the solder masking process
by: Martin, Timothy Lee
Published: (2007)

Investigation and Prediction of Solder Joint Reliability for Ceramic Area Array Packages under Thermal Cycling, Power Cycling, and Vibration Environments
by: Perkins, Andrew Eugene
Published: (2007)

Predictive Failure Model for Flip Chip on Board Component Level Assemblies
by: Muncy, Jennifer V.
Published: (2005)

Comparison of 43Sn/43Pb/14Bi Solder and Standard 60Sn/40Pb Solder by Thermocyclic Fatigue Analysis
by: Calderon, Jose Guadalupe
Published: (1991)

Phenomenological modeling of the deformation behavior of solders
by: Scott, Daniel T.
Published: (2007)

Investigation of electromigration reliability of solder joint in flip-chip packages
by: Ding, Min, 1975-
Published: (2008)

Fluxless ultrasonic soldering of SiC ceramics and Cu by Bi–Ag–Ti based solder
by: Daniela Šuryová, et al.
Published: (2020-03-01)

Thermal cycling and rate-dependent stress relaxation behavior of solders
by: Woodmansee, Michael W.
Published: (2007)

Characterization of Soldering Alloy Type Bi-Ag-Ti and the Study of Ultrasonic Soldering of Silicon and Copper
by: Roman Kolenak, et al.
Published: (2021-04-01)

Characterizing the Soldering Alloy Type In–Ag–Ti and the Study of Direct Soldering of SiC Ceramics and Copper
by: Roman Koleňák, et al.
Published: (2018-04-01)

Solid State Diffusion Kinetics of Intermetallic Compound Formation in Composite Solder
by: Sees, Jennifer A. (Jennifer Anne)
Published: (1993)

Method of defence of solder surface from oxidization
by: Kurmashev Sh. D., et al.
Published: (2010-02-01)

Characterization of ultrasonic soldering of Ti and Ni with Ni/Al reactive multilayer deposition
by: Erika Hodulova, et al.
Published: (2019-11-01)

A study of six weak organic acids commonly used in soldering fluxes
by: Smith, Brian Andrew
Published: (2008)

Development of convective reflow-projection moire warpage measurement system and prediction of solder bump reliability on board assemblies affected by warpage
by: Tan, Wei
Published: (2008)

A Non-Contact Measurement Technique At The Micro Scale
by: Ghosh, Santaneel
Published: (2005)

Fundamental study of underfill void formation in flip chip assembly
by: Lee, Sangil
Published: (2009)

Fundamental understanding of electrically conductive adhesives (ECA's)
by: Lu, Daoqiang
Published: (2008)

Analysis of the solder paste release in fine pitch stencil printing processes
by: Rodriguez, German Dario
Published: (2008)

Soldering sheets using soft solders
by: Milan Brožek
Published: (2013-01-01)

Design of an advanced system for inspection of microelectronic devices and their solder connections using laser-induced virbration techniques
by: Howard, Turner A.
Published: (2007)

Cannot write session to /tmp/vufind_sessions/sess_g5lue758omemqm0ncmuip946e6