On the determination of the failure surfaces for an orthotropic quasi-homogeneous material

On the determination of the failure surfaces for an orthotropic quasi-homogeneous material

Bibliographic Details
Main Author:	Kaminski, Benjamin Eugene
Published:	Georgia Institute of Technology 2007
Subjects:	Composite materials Strength of materials
Online Access:	http://hdl.handle.net/1853/15644

Similar Items

Dynamic stress intensity factors in orthotropic materials
by: Choi, John O.
Published: (2006)

Determining the Optimal Orientation of Orthotropic Material for Maximizing Frequency Bandgaps
by: Haystead, Dane
Published: (2012)

Determining the Optimal Orientation of Orthotropic Material for Maximizing Frequency Bandgaps
by: Haystead, Dane
Published: (2012)

Reconstruction of the material parameters of the homogenous isotropic or orthotropic 2D continuum
by: Šika Z., et al.
Published: (2007-11-01)

Modeling of Contact in Orthotropic Materials using Variational Asymptotic Method
by: Eswaran, Jai Kiran
Published: (2018)

Post failure energy absorbing mechanisms of filament wound composite tubes
by: Keal, R.
Published: (1983)

Failure mechanisms and prediction in advanced composite materials
by: Parnas, Levend
Published: (2008)

Genetic Homogenization of Composite Materials
by: P. Tobola, et al.
Published: (2009-04-01)

Elastographic Reconstruction Methods for Orthotropic Materials
by: Barani Lonbani, Zohreh
Published: (2011)

Homogenization method for elastic materials
by: Seifrt F.
Published: (2007-11-01)

The significance and measurement of the Tsai-Wu normal interaction parameter F₁₂
by: Hansen, William Christian
Published: (2013)

The Impact of Methods of Forming on the Mechanical Properties of Fiber-reinforced Polymer-matrix Composite Materials
by: Piernik Krzysztof, et al.
Published: (2015-11-01)

[en] AN HYBRID METHOD FOR PHOTOELASTIC ANALYSIS OF ORTHOTROPIC COMPOSITE MATERIALS
by: MARCO ANTONIO MARTINS CAVACO
Published: (2012)

Failure mechanisms in VLSI bonds subjected to mechanical and environmental stresses
by: Maguire, Dawn Laurel
Published: (2009)

Assessment of mesh dependency in the numerical simulation of compact tension tests for orthotropic materials
by: B. Lopes, et al.
Published: (2020-08-01)

Fracture mechanics parameters for cracks on non-planar interfaces
by: Yang, Lin
Published: (2007)

Homogeneous Dielectric Equivalents of Composite Material Shields
by: P. Tobola, et al.
Published: (2009-04-01)

[en] PHOTOELASTIC ANALYSIS OF BIRREFRINGENT AND ORTHOTROPIC COMPOSITES
by: ROGERIO ATHAYDE ANTONELLI
Published: (2012)

Material Property-Estimate Technique Based on Natural Frequency for Updating Finite Element Model of Orthotropic Beams
by: Kookhyun Kim, et al.
Published: (2020-12-01)

Response Surface Analysis of the Compressive Strength of Metakoalin Self-Compacting Concrete
by: Ayobami Adebola Busari
Published: (2019-06-01)

Strength determination and prediction of destructive processes of composites
by: Ilmars Blumbergs, et al.
Published: (2015-06-01)

[en] AN HYBRID METHOD FOR PHOTOELASTIC ANALYSIS OF ORTHOTROPIC COMPOSITE MATERIALS
by: LUIZ OTAVIO GUERREIRO DE CASTRO
Published: (2015)

An Optimization Technique Applied to the Determination of Orthotropic Material Properties Using Dynamic Response Test Data
by: Webster, Ronald L.
Published: (1969)

Effect of laser shear on bond strength of composite material with the tooth.
by: Jabbar Hussein Kamil, et al.
Published: (2013-08-01)

MESHLESS MODELING OF ELASTIC DEFORMATIONS OF POLYMERIC COMPOSITE MATERIALS UNDER STATIC LOADING
by: Angelica V. Sizaya, et al.
Published: (2020-08-01)

Optimal design of Orthotropic Piezoelectric membranes and plates using particle swarms
by: Joubert, Matthew James Stuart
Published: (2014)

The Timoshenko Three-Beams Technique To Estimate The Main Elastic Moduli Of Orthotropic Homogeneous Materials
by: Muhsin J.J, et al.
Published: (2005-01-01)

Determination of the first damage criterion of a glass/epoxy composite material using an in-situ test system
by: de Vaulx, Thomas
Published: (2007)

Failure processes in unidirectional composite materials
by: Sundaresan, Mannur J.
Published: (2017)

Experimental Procedures and Data Analysis of Orthotropic Composites
Published: (2016)

Critical Analysis of “Maximum Stress Failure Criterion” for Composite Materials
by: Ion FUIOREA, et al.
Published: (2009-05-01)

A Generalized Orthotropic Elasto-Plastic Material Model for Impact Analysis
Published: (2016)

Experimental and Analytical Study of Bending Stresses and Deflections in Curved Beam Made of Laminated Composite Material
by: Assma Hassan Ismail
Published: (2017-12-01)

Thermal Disturbances in Twinned Orthotropic Thermoelastic Material
by: Rani L., et al.
Published: (2018-11-01)

Investigation of structural design and analysis method for composite wing-in-ground craft
by: LI Yongsheng, et al.
Published: (2020-08-01)

Bearing strength and failure behavior of hybrid composite laminates.
by: Prasad, Hanasoge Saraswathi Deepthi
Published: (2020)

The performance of composites from vegetable raw materials with changes in temperature and humidity
by: I.V. Susoeva, et al.
Published: (2017-05-01)

Failure analysis of fiber reinforced composite materials used in Malaysian industries / Jamaluddin Mahmud, Wahyu Kuntjoro and Aidah Jumahat
by: Mahmud, Jamaluddin, et al.
Published: (2007)

Low-density structural materials for aircraft
by: Forney, Adrian Kenneth
Published: (2007)

An in-vitro study of the physical properties of core build-up materials
by: Asia, Winifred
Published: (2018)