Detection of turn faults arising from insulation failure in the stator windings of AC machines

Detection of turn faults arising from insulation failure in the stator windings of AC machines

Bibliographic Details
Main Author:	Cash, M. Alex
Published:	Georgia Institute of Technology 2007
Subjects:	Electric machinery Maintenance Electric machinery Monitoring
Online Access:	http://hdl.handle.net/1853/15460

Similar Items

Stator fault analysis of synchronous machines
by: Neti, Prabhakar
Published: (2010)

Fault signature detection for rolling element bearings in electric machines
by: Stack, Jason R.
Published: (2007)

Current-based sensorless vibration monitoring of small ac machines
by: Riley, Caryn M
Published: (2007)

An architecture for a diagnostic/prognostic system with rough set feature selection and diagnostic decision fusion capabilities
by: Lee, Seungkoo
Published: (2007)

Modeling and fault detection in electromagnetic devices : applications to synchronous machines and signal conditioning systems /
by: Miri, Seyed-Mehdi
Published: (1987)

Design aspects and optimisation of an axial field permanent magnet machine with an ironless stator
by: Wang, Rong-Jie
Published: (2012)

Design aspects and optimisation of an axial field permanent magnet machine with an ironless stator
by: Wang, Rong-Jie
Published: (2012)

Intelligent signal/image processing for fault diagnosis and prognosis
by: Wang, Peng
Published: (2007)

Finite-element analysis of nonlinear magnetic fields in electric machines.
by: Chari, Madabushi Venkatakrishnama.
Published: (1970)

Design of tapered and straight stator pole switched reluctance machines
by: Sitsha, Lizo M. M.
Published: (2012)

Shipboard applications of non-intrusive load monitoring
by: Ramsey, Jack S.
Published: (2012)

Electrodynamic forces in compensated pulsed electrical machines
by: Ozdemir, Muammer
Published: (2011)

Investigation of cage rotor variables including on-line monitoring
by: Siyambalapitiya, Don Joseph Tilak
Published: (1987)

Computerised speed monitoring system for nylon spinning
by: Abrahams, Leon Gary
Published: (2012)

Analysis and design of dissipative frequency selective two-layer conductive structures
by: Leeburn, Dominic Andrew
Published: (2014)

Maintenance management with emphasis on condition monitoring of excavation machines
by: Gouws, Leonie Elizabeth
Published: (2014)

Design of structures and foundations for vibrating machines.
by: Ulassi, V. R.
Published: (2012)

Feasibility study of developing China trade for the technical product: small size electric generator : research report.
Published: (1981)

Single-turn sensitive stator inter-turn fault detection of induction machines
by: Wu, Qing
Published: (2010)

Incipient Bearing Fault Detection for Electric Machines Using Stator Current Noise Cancellation
by: Zhou, Wei
Published: (2008)

The airgap magnetic field in electrical machines with special reference to the effect of eccentricity
by: Gashus, O. K.
Published: (1960)

The application of Lie derivatives in Lagrangian mechanics for the development of a general holonomic theory of electric machines
by: Gustafson, Ture Kenneth
Published: (2011)

Strategic issues for life extension of boiler feed pump drives at coal fired power stations
by: Govender, T.
Published: (2010)

Drywingselektroniese mutators met nie-lineêre resonante induktore en kapasitore
by: De Villiers, Johannes Reinach
Published: (2014)

Elektroniese beheer van 'n sichronereluktansiemasjien
by: De Rooij, Michael Andrew
Published: (2014)

Life cycle management for mining machinery
by: Barkhuizen, W. F.
Published: (2008)

Shipboard applications of non-intrusive load monitoring
by: Ramsey, Jack S
Published: (2006)

Fault Detection and Diagnosis with Imbalanced and Noisy Data: A Hybrid Framework for Rotating Machinery
by: Jalayer, M., et al.
Published: (2022)

Fault Detection and Diagnosis with Imbalanced and Noisy Data: A Hybrid Framework for Rotating Machinery
by: Jalayer, M., et al.
Published: (2022)

Fault Diagnosis of Rotary Machines Using Deep Convolutional Neural Network with Wide Three Axis Vibration Signal Input
by: Davor Kolar, et al.
Published: (2020-07-01)

Determination of the Most Economically Feasible Method for High Volume Machining of a Discharge Port in a Powder-Metal Compressor Cylinder
by: Carter, Perry W.
Published: (1975)

A study of the care, repair, operation and adjustment of tillage machinery as taught in vocational farm shop
by: Raines, Ernest Lee
Published: (2013)

Investigation on the adaptive control with pressure feedback in electrochemical machining
by: Karima, Medhat.
Published: (1975)

Unlaminated rotors for A.C. machines with special reference to some new designs
by: Woolley, I.
Published: (1971)

Effect of machining parameters and bismuth addition on al-20%mg2si machinability during dry turning
by: Razavykia, Abbas
Published: (2014)

Monitoring of Agricultural Machines with Used Engine Oil Analysis
by: Daniel Bekana, et al.
Published: (2015-01-01)

A Tailored Ontology Supporting Sensor Implementation for the Maintenance of Industrial Machines
by: Elaheh Maleki, et al.
Published: (2017-09-01)

Reliability centered maintenance implementation on the eThekwini electricity network for system maintenance process optimisation
by: Lokothwayo, Musawenkosi Phillemon
Published: (2017)

Experimental analysis of machining performance based on selected cutting parameters for smart CNC turning environment
by: Mohamad, Shuhaidi
Published: (2014)

Developmental Studies On Separately Cooled Sheet Wound Gas Insulated Transformer - Modeling Of Electromagnetic Forces, Surge Voltage And Steady State Current Distribution In The Windings
by: Ray, Ayonam
Published: (2012)