A methodology for probabilistic remaining creep life assessment of gas turbine components

A methodology for probabilistic remaining creep life assessment of gas turbine components

Bibliographic Details
Main Author:	Liu, Zhimin
Format:	Others
Language:	en_US
Published:	Georgia Institute of Technology 2006
Subjects:	Gas-turbines Parts Service life (Engineering) Materials Creep
Online Access:	http://hdl.handle.net/1853/13004

Similar Items

A Parametric Physics Based Creep Life Prediction Approach to Gas Turbine Blade Conceptual Design
by: Smith, Marcus Edward Brockbank
Published: (2008)

Remaining life assessment of a high pressure turbine casing in creep and low cycle service regime
by: Bakić Gordana M., et al.
Published: (2014-01-01)

Evaluation of turbine rotor blade life taking into account static and thermal cyclic loading
by: I. Kh. Badamshin
Published: (2018-10-01)

A probabilistic representation for drained creep in clays /
by: Chen, Dunstan Dou-Shen
Published: (1977)

Modeling creep behavior in a directionally solidified nickel base superalloy
by: Ibanez, Alejandro R.
Published: (2005)

A small-scale creep test for calibrating an efficient lifetime model for high pressure turbine blades
by: Bartsch, M., et al.
Published: (2022)

Analytic Creep Durability of Rotating Uniform Disks
by: Yuriy Nyashin, et al.
Published: (1998-01-01)

Thermodynamic Performance and Creep Life Assessment Comparing Hydrogen- and Jet-Fueled Turbofan Aero Engine
by: Emmanuel O. Osigwe, et al.
Published: (2021-04-01)

A small-scale creep test for calibrating an efficient lifetime model for high pressure turbine blades
by: Bartsch, M., et al.
Published: (2022)

Multi-Surrogate Collaboration Approach for Creep-Fatigue Reliability Assessment of Turbine Rotor
by: Lu-Kai Song, et al.
Published: (2020-01-01)

Life of gas turbine engine components under corrosive exposure
by: M. V. Pivovarova, et al.
Published: (2019-10-01)

Probabilistic Life Models for Steel Structures Subject to Creep- Fatigue Damage
by: Fatmagul Ibisoglu, et al.
Published: (2015-12-01)

Impingement cooling of gas turbine components
by: Abdul Husein, Reyad Abdul Ameer
Published: (1990)

Advancements of Gas Turbine Engines and Materials
by: Temple, Benjamin John
Published: (2020)

Creep predictions for turbomachinery components
by: Sieburg, H O
Published: (2016)

Thermal Analysis and Creep Lifetime Prediction Based on the Effectiveness of Thermal Barrier Coating on a Gas Turbine Combustor Liner Using Coupled CFD and FEM Simulation
by: Kanmaniraja Radhakrishnan, et al.
Published: (2021-06-01)

Discrimination of Rapid and Gradual Deterioration for an Enhanced Gas Turbine Life-cycle Monitoring and Diagnostics
by: Amare Fentaye, et al.
Published: (2021-03-01)

Combustion Instability Screech In Gas Turbine Afterburner
by: Ashirvadam, Kampa
Published: (2009)

Current status and development prospects of Russian gas turbines
by: Vladimir S. Nikitin, et al.
Published: (2017-07-01)

Correlation of hardness with creep rupture strength, allowable stress and service/remaining life of Grade 91 heat-resistant steel
by: PENG Zhi-fang, et al.
Published: (2021-09-01)

Part-Load Performance of aWet Indirectly Fired Gas Turbine Integrated with an Organic Rankine Cycle Turbogenerator
by: Leonardo Pierobon, et al.
Published: (2014-12-01)

Probabilistic Assessment of Failure Risk in Gas Turbine Discs
by: Forsberg, Fredrik
Published: (2008)

Estimation of the Ct parameter for primary creep
by: Leung, Chun-Pok
Published: (2007)

Fe Analysis of a Steam Turbine HP Rotor Blade Stage Concerning Material Effort, Dynamic Properties and Creep Damage Assessment
by: Borkowski Paweł, et al.
Published: (2016-03-01)

An experimental investigation in the cooling of a large gas turbine wheelspace
by: Yep, Francis W.
Published: (2008)

A Critical Analysis of the Conventionally Employed Creep Lifing Methods
by: Zakaria Abdallah, et al.
Published: (2014-04-01)

Thermo-Structural Analysis of First Stage Gas Turbine Rotor Blade Materials for Optimum Service Performance
by: Aniekan Ikpe, et al.
Published: (2018-08-01)

Self-contained gas turbine unite with turbine expander drive of the compressor for the gas distribution station
by: Zaryankin A., et al.
Published: (2012-12-01)

Investigation of combustion instability mechanisms in premixed gas turbines
by: Lieuwen, Tim C.
Published: (2008)

Probabilistic and Risk-Informed Life Extension Assessment of Wind Turbine Structural Components
by: Jannie Sønderkær Nielsen, et al.
Published: (2021-02-01)

Investigation of the Influence of Gas Pressure at the Inlet in Jet-Reactive Turbine on its Performance Indicators
by: Vanyeyev S.M., et al.
Published: (2018-12-01)

the Life Cycle Assessments of Gas Turbine using Inlet Air Cooling System
by: Thamir K. Ibrahim
Published: (2016-02-01)

LIFE CYCLE ASSESSMENTSOF GAS TURBINE USING INLET AIR COOLING SYSTEM
by: Thamir Khalil Ibrahim
Published: (2016-02-01)

Flow Field Computations of Combustor-Turbine Interactions in a Gas Turbine Engine
by: Stitzel, Sarah M.
Published: (2014)

Microstructure analysis in the creep process of a gas turbine blade of the turbine engine
by: Józef BŁACHNIO, et al.
Published: (2016-05-01)

Gas turbines – technological development and potential use in CAES systems
by: Damian JAKOWSKI, et al.
Published: (2016-05-01)

Numerical modeling of co-emissions for gas turbine combustors operating at part-load conditions
by: Noah Klarmann, et al.
Published: (2018-07-01)

Gas turbines: gas cleaning requirements for biomass-fired systems
by: John Oakey, et al.
Published: (2004-03-01)

Unsteady multi-component simulations dedicated to the impact of the combustion chamber on the turbine of aeronautical gas turbines
by: Koupper, Charlie
Published: (2015)

Creep Rupture Life Prediction Based on Analysis of Large Creep Deformation
by: YE Wenming, et al.
Published: (2016-08-01)