The determination of shear load distribution in bolt groups by measurement of surface strains in the heads with electric resistance strain gages

The determination of shear load distribution in bolt groups by measurement of surface strains in the heads with electric resistance strain gages

Bibliographic Details
Main Author:	Hoover, John Wesley
Format:	Others
Language:	en_US
Published:	Georgia Institute of Technology 2006
Subjects:	Bolts and nuts Strains and stresses
Online Access:	http://hdl.handle.net/1853/12260

Similar Items

Turn-of-the-nut tightening of anchor bolts
by: Richards, Jason Halbert
Published: (2004)

The application of distributed optical strain sensing to measure the strain distribution of ground support members
by: Bradley Forbes, et al.
Published: (2018-02-01)

Development of the smart aircraft bolt.
by: Msibi, L. L.
Published: (2012)

Calibration of the bolt pretension by strain gauges vs. FEA
by: Fric Nenad, et al.
Published: (2016-01-01)

Electric strain gage analysis of stress concentration in shear panel with an access hole
by: Kouns, John Henry
Published: (2006)

Experimental Studies of an Asymmetric Multi-Bolted Connection under Monotonic Loads
by: Rafał Grzejda, et al.
Published: (2021-05-01)

Analysis of Bolt Bending in Preloaded Bolted Joints
by: Welch Michael
Published: (2018-11-01)

Numerical analysis of a double shear standard bolted connection considering monotonic loadings
by: Mariana Ferreira Rodrigues, et al.
Published: (2017-12-01)

An Experimental Investigation into the Stress-Strain Characteristic under Static and Quasi-Static Loading for Partially Embedded Rock Bolts
by: Krzysztof Skrzypkowski
Published: (2021-03-01)

The effect of bolt clearance and tolerances on the shear resistance of bolted connections subjected to uni-axial loading : A parametric study
by: de Abreu Almeida, Fernando
Published: (2018)

Comparative Shear Tests of Bolt Rods Under Static and Dynamic Loading
by: Pytlik Andrzej
Published: (2020-06-01)

Investigation of the Effects of Spacing between Bolts in a Row in a Single-Shear Timber Connection Subjected to Reverse Cyclic Loading
by: Billings, Mary Anna
Published: (2014)

Analytical and experimental investigation of a flush moment end-plate connection with six bolts at the tension flange
by: Bond, Douglas Edward
Published: (2017)

Behaviour of eccentric bolted shear connections
by: Badawi, Hossam El-Din S.
Published: (1983)

A Paradigm for the Analysis of Preloaded Bolted Joints
by: Welch Michael
Published: (2019-05-01)

Modal Properties of Bolted Housing depending on the Methodology of a Solution of Bolted Joints
by: Peter Weis*, et al.
Published: (2021-01-01)

Experimental Studies of the Process of Tightening an Asymmetric Multi-Bolted Connection
by: Rafal Grzejda, et al.
Published: (2021-01-01)

Preloaded Bolted Joint Made with a Single Row of Fasteners
by: Michael Welch
Published: (2020-04-01)

Effects of Head Size on the Performance of Twist-Off Bolts
by: Schnupp, Keith Otto
Published: (2014)

Workability study for adiabatic shear band phenomenon in the steel cold heading process
by: Sabih, Amar.
Published: (2007)

Load distributions in bolted single lap joints under non-central tensile shear loading
by: Chaiwat Sinthusiri, et al.
Published: (2021-06-01)

Multifunction resistive strain sensors (gage)
by: Y.Y. Luchko, et al.
Published: (2011-12-01)

The study of multicomponent loading effect on thinwalled structures with bolted connections
by: Oleksandr Atroshenko, et al.
Published: (2019-02-01)

A Nut-and-Bolt Microfluidic Mixing System for the Rapid Labeling of Immune Cells with Antibodies
by: Jakir Hossain Imran, et al.
Published: (2020-03-01)

Effects of nonlinearity on determination of bolt forces for the operational state of a bolted flange connection
by: Grzejda R.
Published: (2014-02-01)

Increasing the sensitivity of the strain gage measurements by using pulsed inputs
by: Vail, Charles David, 1919-
Published: (1952)

Experimental Investigation of Group Action Factor for Bolted Wood Connections
by: Anderson, Guy Thomas
Published: (2014)

A finite element method for calculating load distributions in bolted joint assemblies
by: Söderberg, Johan
Published: (2012)

Comparison of behaviour of laterally loaded round and squared timber bolted joints
by: Antonín Lokaj, et al.
Published: (2017-01-01)

The use of rock bolts in the support of mine openings
by: De Lucio, Felipe Alberto, 1937-
Published: (1962)

Experimental Study on Shear Performance of Bolt in Roadway Supporting
by: D.J. Li, et al.
Published: (2014-09-01)

The Effects of Bolt Spacing on the Performance of Single-Shear Timber Connections Under Reverse-Cyclic Loading
by: Albright, Dustin Graham
Published: (2014)

Nut and Bolt Microfluidics with Helical Minichannel for Counting CD4+ T-Cells
by: Jung Kyung Kim, et al.
Published: (2019-03-01)

Investigation and design of a torquemeter using SR-4 strain gages
by: Reece, Carroll Kent
Published: (2014)

Detailed Research on the Turbulent Kinetic Energy’s Distribution in Fishways in Reference to the Bolt Fishway
by: Marta Puzdrowska, et al.
Published: (2019-04-01)

Measuring Feed Force in Machining Using a Strain Gage
by: Salman Al Farisi Siregar, et al.
Published: (2021-04-01)

Nonlinear Progressive Damage Analysis of Notched or Bolted Fibre-Reinforced Polymer (FRP) Laminates Based on a Three-Dimensional Strain Failure Criterion
by: Yue Liu, et al.
Published: (2014-03-01)

Stress-strain behavior investigation of friction grip bolts in flange joints of trusses
by: A.A. Semenov, et al.
Published: (2014-08-01)

Optimal tightening process of bolted joints
by: Monville Jean-Michel
Published: (2016-01-01)

Analysis of the helical-wedge rolling process for producing a workholding bolt
by: Z. Pater
Published: (2014-10-01)

Cannot write session to /tmp/vufind_sessions/sess_vvnls9jrqp381q95rn8t8rmsaa