An investigation into the feasibility of producing yttria-stabilized zirconia-tungsten eutectic composites in a water-cooled skull aparatus

An investigation into the feasibility of producing yttria-stabilized zirconia-tungsten eutectic composites in a water-cooled skull aparatus

Bibliographic Details
Main Author:	Price, James Paschall
Format:	Others
Language:	en_US
Published:	Georgia Institute of Technology 2006
Subjects:	Eutectic alloys
Online Access:	http://hdl.handle.net/1853/10009

Similar Items

An investigation of experimental parameters affecting growth defects in directionally solidified yttria stabilized-zirconia/tungsten eutectic composites
by: Nause, Jeffrey E.
Published: (2008)

Selective chemical etching of unidirectional zirconia-tungsten eutectic composites
by: Moh, Kyung Hwa
Published: (2006)

Optimization of the routine growth of UO₂-W eutectics
by: Barkalow, Raymond William
Published: (2006)

The competitive effects of impurity modification and quench modification on the eutectic solidification of aluminum-silicon alloys
by: Napolitano, Ralph E., Jr.
Published: (2008)

Gadolinia-ceria/molybdenum eutectic composites from skull melting
by: Villalobos, Guillermo Roberts
Published: (2006)

Microstructural, Mechanical and Oxidation Behavior of Ni-Al-Zr Intermetallic Eutectic Alloys
by: Gunjal, Vilas Vishnu
Published: (2018)

Effect of Sb Addition on the Solidification of Deeply Undercooled Ag-28.1 wt. % Cu Eutectic Alloy
by: Su Zhao, et al.
Published: (2016-02-01)

Design and development of CoCrFeNiTa eutectic high entropy alloys
by: Muhammad Mukarram, et al.
Published: (2021-01-01)

Single-Phase And Multi-Phase Convection During Solidification Of Non-eutectic Binary Solutions
by: Chakraborty, Prodyut Ranjan
Published: (2014)

Chemical etching and ion milling of uranium dioxide-tungsten unidirectional composites
by: Prosser, Sherman Lee
Published: (2006)

Effect of Y on ZL114A eutectic silicon and mechanical properties with gravity casting under different cooling rates
by: WU Zhen, et al.
Published: (2020-12-01)

Research on lamellar structure and micro-hardness of directionally solidified Sn-58Bi eutectic alloy
by: Hu Xiaowu, et al.
Published: (2012-11-01)

Evolution of eutectic spacing during unidirectional solidification of Al-Ni alloys
by: Igor Jefferson Cabral Araujo, et al.
Published: (2011-01-01)

Influence of Growth Rate and Magnetic Field on Microstructure and Properties of Directionally Solidified Ag-Cu Eutectic Alloy
by: Xiaowei Zuo, et al.
Published: (2016-07-01)

Thermal characterization of the In–Sn–Zn eutectic alloy
by: Dragan Manasijević, et al.
Published: (2020-01-01)

Scanning electron microscopy in the study of the structures of eutectic alloys of iron and chromium with refractory borides
by: Panarin Valentyn E.
Published: (2019-12-01)

Compatibility of T91 steel with liquid Pb-Bi eutectic alloy at 450 oC
by: Zhang Yutuo, et al.
Published: (2014-05-01)

On the Al–Al<sub>11</sub>Ce<sub>3</sub> Eutectic Transformation in Aluminum–Cerium Binary Alloys
by: Frank Czerwinski, et al.
Published: (2020-10-01)

Effect of microalloying and tensile deformation on the internal structures of eutectic Si phase in Al-Si alloy
by: Jiqiang Chen, et al.
Published: (2020-05-01)

Evaluation and Determination of Silicon Eutectic Modification Level Using Thermal Analysis in 319 Aluminum Alloy
by: S. Ghodrat, et al.
Published: (2008-12-01)

The solubility of helium in lead–lithium eutectic alloy
by: Abdulrahman, A., et al.
Published: (2022)

Effect of strontium and solidifi cation rate on eutectic grain structure in an Al-13 wt% Si alloy
by: Liao Hengcheng, et al.
Published: (2009-08-01)

Effect of High Pressure and Temperature on the Evolution of Si Phase and Eutectic Spacing in Al-20Si Alloys
by: Rong Zhang, et al.
Published: (2021-06-01)

Lanthanides: a focused review of eutectic modification in hypoeutectic Al–Si alloys
by: Ozen Gursoy, et al.
Published: (2020-07-01)

Effect of phosphor addition on eutectic solidification and microstructure of an Al-13%Si alloy
by: Liao Hengcheng, et al.
Published: (2011-11-01)

Unidirectional solidification of UO -RO type refractory oxides with emphasis in the system UO -MgO.
by: Pao, Min Chian
Published: (2006)

Thermoelectric Properties of CoCrFeNiNb<sub>x</sub> Eutectic High Entropy Alloys
by: Kaiming Han, et al.
Published: (2020-08-01)

Special Issue Editorial: Eutectic Solvents
by: Piotr Cysewski
Published: (2020-10-01)

Modeling of Eutectic Formation in Al-Si Alloy Using A Phase-Field Method
by: Ebrahimi Z.
Published: (2017-12-01)

A novel Al-10Si-2Fe master alloy and its effect on inoculation of eutectic cells in Sr-modified A356 alloy
by: Zhang Yong, et al.
Published: (2014-03-01)

Deliquescence Behavior of Deep Eutectic Solvents
by: Henrik Palmelund, et al.
Published: (2021-02-01)

Design of Deep Eutectic Systems: A Simple Approach for Preselecting Eutectic Mixture Constituents
by: Ahmad Alhadid, et al.
Published: (2020-02-01)

Influence of titanium content on wear resistance of electrolytic low-titanium eutectic Al-Si piston alloys
by: Yan Shuqing, et al.
Published: (2008-11-01)

Microstructural evolution of ternary Ag33Cu42Ge25 eutectic alloy inside ultrasonic field
by: Wei Zhai, et al.
Published: (2014-12-01)

Metallurgical Parameters Controlling the Eutectic Silicon Charateristics in Be-Treated Al-Si-Mg Alloys
by: Mohamed F. Ibrahim, et al.
Published: (2016-01-01)

Modeling studies on divorced eutectic formation of high pressure die cast magnesium alloy
by: Meng-wu Wu, et al.
Published: (2018-01-01)

Modeling of aluminum-silicon irregular eutectic growth by cellular automaton model
by: Rui Chen, et al.
Published: (2016-03-01)

Three-dimensional reconstruction of anomalous eutectic in laser remelted Ni-30 wt.% Sn alloy
by: Yong-Qing Cao, et al.
Published: (2015-12-01)

Effect of Aluminum Addition on the Microstructure and Properties of Non-Eutectic Sn-20Bi Solder Alloys
by: Wenchao Yang, et al.
Published: (2019-04-01)

Functions and mechanism of modification elements in eutectic solidification of Al-Si alloys: A brief review
by: Zu Fangqiu, et al.
Published: (2014-07-01)