Process-induced Long-term Deformation Behavior of Injection Molded Semicrystalline Thermoplastics

Process-induced Long-term Deformation Behavior of Injection Molded Semicrystalline Thermoplastics

Show other versions (1)

Process-induced Long-term Deformation Behavior of Injection Molded Semicrystalline Thermoplastics Injection molding is a very complex process because the polymer experiences a complex thermorheological history during molding that influences the molecular orientation, residual stresses, frozen-in fr...

Full description

Bibliographic Details
Main Author:	Banik, Kaushik
Other Authors:	TU Chemnitz, Fakultät für Maschinenbau
Format:	Doctoral Thesis
Language:	English
Published:	Universitätsbibliothek Chemnitz 2006
Subjects:	Injection molding Langzeitdeformationsverhalten Molekülorientierungen Thermoplaste crystallinity free volume long-termdeformation behavior molecular orientation physical aging physikalische Alterung semicrystalline teilkristallin thermoplastics thermorheological history thermorheologische Vorgeschichte ddc:620 Freies Volumen Kristallinität Spritzgießen
Online Access:	http://nbn-resolving.de/urn:nbn:de:swb:ch1-200601279 http://nbn-resolving.de/urn:nbn:de:swb:ch1-200601279 http://www.qucosa.de/fileadmin/data/qucosa/documents/5240/data/Dissertation.pdf http://www.qucosa.de/fileadmin/data/qucosa/documents/5240/20060127.txt

Similar Items

Process-induced Long-term Deformation Behavior of Injection Molded Semicrystalline Thermoplastics
by: Banik, Kaushik
Published: (2006)

Einfluß des freien Volumens auf das verarbeitungsabhängige Deformationsverhalten spritzgegossener amorpher Thermoplaste
by: Engelsing, Kurt
Published: (2001)

Einfluß des freien Volumens auf das verarbeitungsabhängige Deformationsverhalten spritzgegossener amorpher Thermoplaste
by: Engelsing, Kurt
Published: (2001)

Injection molding of thermoplastics in rectangular cavities
by: Doan, Phung Hien
Published: (1974)

Development and Validation of a Test Mold for Thermoplastic Resin Transfer Molding of Reactive PA-6
by: Róbert Boros, et al.
Published: (2020-04-01)

The dynamics of cavity pressure in thermoplastic injection molding /
by: Conley, Nancy Ann.
Published: (1985)

The dynamics and control of melt temperature in thermoplastic injection molding /
by: Gomes, Vincent G. (Vincent Gracias)
Published: (1985)

Experimental study of anisotropy in injection molded thermoplastic parts
by: Bakerdjian, Zaven
Published: (1978)

The dynamics of injection hydraulics in thermoplastics injection molding /
by: Abu Fara, Dib.
Published: (1983)

Computer simulation of the injection molding of viscoelastic crystalline thermoplastics
by: Lafleur, Pierre G.
Published: (1983)

Molecular Dynamics Simulation on the Interfacial Behavior of Over-molded Hybrid Fiber Reinforced Thermoplastic Composites
by: Bingyan Jiang, et al.
Published: (2020-06-01)

MATHEMATICAL MODELING OF THE IN-MOLD COATING PROCESS FOR INJECTION MOLDED THERMOPLASTIC PARTS
by: Chen, Xu
Published: (2003)

Injection molding of thermoplastics.
by: Kenig, Samuel
Published: (1972)

Fiber movement during bladder molding of filament-wound preforms
by: Beeson, Margaret Susan
Published: (2007)

Injection Molding of Thermoplastic Cellulose Esters and Their Compatibility with Poly(Lactic Acid) and Polyethylene
by: Pia Willberg-Keyriläinen, et al.
Published: (2018-11-01)

Tailoring the mesoscopic structure and orientation of semicrystalline and liquid-crystalline polymers : from 1D- to 2D-confinement
by: Odarchenko, Yaroslav
Published: (2012)

A Fatigue Damage Model for Life Prediction of Injection-Molded Short Glass Fiber-Reinforced Thermoplastic Composites
by: Mohammad Amjadi, et al.
Published: (2021-07-01)

Correlations between injection molding and welding of microcellular materials
by: Heidrich, Dario, et al.
Published: (2017)

Investigation of Thermodynamic Properties of the Slurry of the Molding Process Beryllium Ceramics
by: Zamira Sattinova, et al.
Published: (2018-12-01)

Investigation of the Viscoelastic Behavior Variation of Glass Mat Thermoplastics (GMT) in Compression Molding
by: Chao-Tsai Huang, et al.
Published: (2019-02-01)

Effect of starch types on properties of biodegradable polymer based on thermoplastic starch process by injection molding technique
by: Yossathorn Tanetrungroj, et al.
Published: (2015-04-01)

Biaxial extensional flow of molten thermoplastics
by: Rhi-Sausi Galindo, Jorge.
Published: (1979)

Acoustomechanics of semicrystalline polymers
by: Fengxian Xin, et al.
Published: (2016-01-01)

The Feasibility of an Internal Gas-Assisted Heating Method for Improving the Melt Filling Ability of Polyamide 6 Thermoplastic Composites in a Thin Wall Injection Molding Process
by: Thanh Trung Do, et al.
Published: (2021-03-01)

Structure and flow properties of glass fiber-filled thermoplastics
by: Tran, Khoa Dinh
Published: (1979)

Thermoplastic Pultrusion: A Review
by: Kirill Minchenkov, et al.
Published: (2021-01-01)

Experimental Study to Optimize Shrinkage Behavior of Semi-Crystalline and Amorphous Thermoplastics
by: M. Abbasalizadeh, et al.
Published: (2018-12-01)

Editorial: Advanced Thermoplastic Composites and Manufacturing Processes
by: Patricia Krawczak, et al.
Published: (2020-07-01)

Molding, structure and mechanical properties of short glass fiber-reinforced thermoplastic composites
by: Doshi, Shailesh R.
Published: (1983)

Grenzflächen beim Mehrkunststoffspritzgießen
by: Kühnert, Ines
Published: (2006)

Recycling and Reprocessing of Thermoplastic Polyurethane Materials towards Nonwoven Processing
by: Bastian Wölfel, et al.
Published: (2020-08-01)

Study of Monitoring Method and Melt Flow Behavior in Compression Molding Process Using Thermoplastic Sheets Reinforced with Discontinuous Long-Fibers
by: Masatoshi Kobayashi
Published: (2021-02-01)

Direct Joule Heating as a Means to Efficiently and Homogeneously Heat Thermoplastic Prepregs
by: Jochen Wellekötter, et al.
Published: (2020-12-01)

Development of Carbon Fiber-Reinforced Thermoplastics for Mass-Produced Automotive Applications in Japan
by: Yi Wan, et al.
Published: (2021-03-01)

Analysis of the Thermoplastic Composite Overmolding Process: Interface Strength
by: Remko Akkerman, et al.
Published: (2020-02-01)

The Role of Structure and Interactions in Thermoplastic Starch–Nanocellulose Composites
by: Emília Csiszár, et al.
Published: (2021-09-01)

Thermal & morphological evaluation of linear and radial SEBS-polypropylene blends
by: Martha Belem Mendienta-García, et al.
Published: (2013-01-01)

Influence of injection molding parameters on electrical resistivity of carbon nanotube reinforced polycarbonate
by: Dönmez Sinan, et al.
Published: (2016-03-01)

Influence of Interleaved Films on the Mechanical Properties of Carbon Fiber Fabric/Polypropylene Thermoplastic Composites
by: Jong Won Kim, et al.
Published: (2016-05-01)

Thermoplastic composites in medical implants
by: Loh, Galay
Published: (2006)