Complex oxides of the system Cu-Ni-Fe-O: synthesis parameters, phase formation and properties

This thesis describes the convenient routes and the preparation conditions (temperature, oxygen partial presssure) which lead to the formation of single phase materials within the quaternary system Cu-Ni-Fe-O. The investigated compositions are the solid solutions CuxNi1-xFe2O4, the ferrites occurrin...

Full description

Bibliographic Details
Main Author: Kenfack, Flaurance
Other Authors: Technische Universität Dresden, Mathematik und Naturwissenschaften, Chemie und Lebensmittelchemie, Institut für Anorganische Chemie
Format: Doctoral Thesis
Language:English
Published: Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden 2004
Subjects:
Online Access:http://nbn-resolving.de/urn:nbn:de:swb:14-1105366432765-06401
http://nbn-resolving.de/urn:nbn:de:swb:14-1105366432765-06401
http://www.qucosa.de/fileadmin/data/qucosa/documents/1244/1105366432765-0640.pdf
Description
Summary:This thesis describes the convenient routes and the preparation conditions (temperature, oxygen partial presssure) which lead to the formation of single phase materials within the quaternary system Cu-Ni-Fe-O. The investigated compositions are the solid solutions CuxNi1-xFe2O4, the ferrites occurring in the phase triangle Cu0.5Ni0.5Fe2O4 -Cu0.9Fe2.1O4 - Cu0.5Fe2.5O4 and some copper-nickel oxide solid solutions. Three synthesis routes have been used, namely (i) the preparation and the thermal decomposition of freeze-dried carboxylate precursors, (ii) the preparation and the oxidation of intermetallic phases and (iii) the preparation and the heat treatment in air of mixed oxide/metallic powders. The thermal decomposition of freeze-dried Cu-Ni-Fe formate has been found as a suitable method for preparing single spinel phases within the Cu-Ni-Fe-O system. In comparison with the conventional solid state reaction, the required temperature is much lower. Concerning the solid solution CuxNi1-xFe2O4 , a single phase spinel is formed at 1000¢XC for x < 0.7; for CuO is identified as second phase. In this latter range the formation of a pure phase required an increase of the iron content in the mixture. The other single spinel phases in the phase triangle Cu0.5Ni0.5Fe2O4 - Cu0.9Fe2.1O4 - Cu0.5Fe2.5O4 have been synthesized under special synthesis p(O2)/T-conditions. For copper ferrites Cu1-xFe2+xO4 with x ?­ 0.1, 0.2, 0.33, 0.4 and 0.5, the change in the conductivity with the temperature is irreversible. The deviation from the linearity of the conductivity ?ã as a function of the temperature occurs due to the thermal history of these samples. The saturation magnetic moment (nB) at 5K, of some synthesized CuxNi1-xFe2O4 compounds has been determined. It has been found that nB increases with the nickel content in the ferrite sample.