Generation of a High Temperature Material Data Base and its Application to Creep Tests with French or German RPV-steel

• Main Authors: Willschütz, H.-G., Altstadt, E.
• Other Authors: Forschungszentrum Rossendorf, Institut für Sicherheitsforschung
• Format: Others
• Language: English
• Published: Forschungszentrum Dresden 2010
• Subjects: Creep and Plasticity of RPV-steel; Tube failure experiments FEM-Simulation
• Online Access: http://nbn-resolving.de/urn:nbn:de:bsz:d120-qucosa-29413; http://nbn-resolving.de/urn:nbn:de:bsz:d120-qucosa-29413; http://www.qucosa.de/fileadmin/data/qucosa/documents/2941/4583.pdf

Considering the hypothetical core melt down scenario for a light water reactor (LWR) a possible failure mode of the reactor pressure vessel (RPV) and its failure time has to be investigated for a determination of the loadings on the containment. Numerous experiments have been performed accompanied with material properties evaluation, theoretical, and numerical work /REM 1993/, /THF 1997/, /CHU 1999/. For pre- and post-test calculations of Lower Head Failure experiments like OLHF or FOREVER it is necessary to model creep and plasticity processes. Therefore a Fi-nite Element Model is developed at the FZR using a numerical approach which avoids the use of a single creep law employing constants derived from the data for a limited stress and temperature range. Instead of this a numerical creep data base (CDB) is developed where the creep strain rate is evaluated in dependence on the current total strain, temperature and equivalent stress. A main task for this approach is the generation and validation of the CDB. Additionally the implementation of all relevant temperature dependent material properties has been performed. For an evaluation of the failure times a damage model according to an approach of Lemaitre is applied. The validation of the numerical model is performed by the simulation of and com-parison with experiments. This is done in 3 levels: starting with the simulation of sin-gle uniaxial creep tests, which is considered as a 1D-problem. In the next level so called "tube-failure-experiments" are modeled: the RUPTHER-14 and the "MPA-Meppen"-experiment. These experiments are considered as 2D-problems. Finally the numerical model is applied to scaled 3D-experiments, where the lower head of a PWR is represented in its hemispherical shape, like in the FOREVER-experiments. This report deals with the 1D- and 2D-simulations. An interesting question to be solved in this frame is the comparability of the French 16MND5 and the German 20MnMoNi55 RPV-steels, which are chemically nearly identical. Since these 2 steels show a similar behavior, it should be allowed on a lim-ited scale to transfer experimental and numerical data from one to the other.