Development of a Calibration Tool using CCP and XCP on CAN Bus

• Main Author: Shivam, Satyesh
• Other Authors: Technische Universität Chemnitz, Fakultät für Informatik
• Format: Dissertation
• Language: English
• Published: Universitätsbibliothek Chemnitz 2016
• Subjects: ECU Test; Entwicklungsmuster; Kalibrierung; XCP; CCP; ECU Testing; Calibration; Design Patterns; ddc:000; Test; Kalibrieren <Messtechnik>
• Online Access: http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-216041; http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-216041; http://www.qucosa.de/fileadmin/data/qucosa/documents/21604/Satyesh_Shivam_Thesis.pdf; http://www.qucosa.de/fileadmin/data/qucosa/documents/21604/signatur.txt.asc

Testing of the Electronic Control Unit is a very important step before delivering the software to customer. Due to increasing complexity in the requirements and the timing constraints, it is needed that the testing should be proper and on time. To meet the timing constraints it is needed to automate the entire process of testing. Although the current testing tool support the automation process, it is very slow. In this thesis a new tool has been developed which will support calibration using CCP and XCP on CAN bus. Secondly, the tool will also provide the feature of automation, where user can write their own script to test the ECU. This will make the entire process of testing very fast. Finally both the solutions will be compared with respect to time for deducing the final conclusion.