Semiconductor Optical Microcavities for Chip-Based Cavity QED
<p>Optical microcavities can be characterized by two key quantities: an effective mode volume Veff, which describes the per photon electric field strength within the cavity, and a quality factor Q, which describes the photon lifetime within the cavity. Cavities with a small Veff and a high Q o...
| Summary: | <p>Optical microcavities can be characterized by two key quantities: an effective mode volume Veff, which describes the per photon electric field strength within the cavity, and a quality factor Q, which describes the photon lifetime within the cavity. Cavities with a small Veff and a high Q offer the promise for applications in nonlinear optics, sensing, and cavity quantum electrodynamics (cavity QED). Chip-based devices are particularly appealing, as planar fabrication technology can be used to make optical structures on a semiconductor chip that confine light to wavelength-scale dimensions, thereby creating strong enough electric fields that even a single photon can have an appreciable interaction with matter. When combined with the potential for integration and scalability inherent to microphotonic structures created by planar fabrication techniques, these devices have enormous potential for future generations of experiments in cavity QED and quantum networks.</p>
<p>This thesis is largely focused on the development of ultrasmall Veff, high-Q semiconductor optical microcavities. In particular, we present work that addresses two major topics of relevance when trying to observe coherent quantum interactions within these semiconductor-based systems: (1) the demonstration of low optical losses in a wavelength-scale microcavity, and (2) the development of an efficient optical channel through which the sub-micron-scale optical field in the microcavity can be accessed. The two microcavities of specific interest are planar photonic crystal defect resonators and microdisk resonators.</p>
<p>The first part of this thesis details the development of photonic crystal defect microcavities. A momentum space analysis is used to design structures in graded square and hexagonal lattice photonic crystals that not only sustain high Qs and small Veffs, but are also relatively robust to imperfections. These designs are then implemented in a number of experiments, starting with device fabrication in an InAsP/InGaAsP multi-quantum-well material to create low-threshold lasers with Qs of 1.3x10^4, and followed by fabrication in a silicon-on-insulator system to create passive resonators with Qs as high as 4.0x10^4. In the latter experiments, an optical fiber taper waveguide is used to couple light into and out of the cavities, and we demonstrate its utility as an optical probe that provides spectral and spatial information about the cavity modes. For a cavity mode with Q ~ 4x10^4, we demonstrate mode localization data consistent with Veff ~ 0.9(λ/n)^3.</p>
<p>In the second part of this thesis, we describe experiments in a GaAs/AlGaAs material containing self-assembled InAs quantum dots. Small diameter microdisk cavities are fabricated with Q ~ 3.6x10^5 and Veff ~ 6(λ/n)^3, and with Q ~ 1.2x10^5 and Veff ~ 2(λ/n)^3. These devices are used to create room-temperature, continuous-wave, optically pumped lasers with thresholds as low as 1μW of absorbed pump power. Optical fiber tapers are used to efficiently collect emitted light from the devices, and a laser differential efficiency as high as 16% is demonstrated. Furthermore, these microdisk cavities have the requisite combination of high Q and small Veff to enable strong coupling to a single InAs quantum dot, in that the achievable coupling rate between the quantum dot and a single photon in the cavity is predicted to exceed the decay rates within the system. Quantum master equation simulations of the expected behavior of such fiber-coupled devices are presented, and progress towards such cavity QED experiments is described.</p>
|
|---|