|
|
|
|
| LEADER |
02476 am a22002413u 4500 |
| 001 |
95997 |
| 042 |
|
|
|a dc
|
| 100 |
1 |
0 |
|a Barton, Taylor W.
|e author
|
| 100 |
1 |
0 |
|a Massachusetts Institute of Technology. Department of Electrical Engineering and Computer Science
|e contributor
|
| 100 |
1 |
0 |
|a Massachusetts Institute of Technology. Microsystems Technology Laboratories
|e contributor
|
| 100 |
1 |
0 |
|a Perreault, David J.
|e contributor
|
| 100 |
1 |
0 |
|a Perreault, David J.
|e contributor
|
| 100 |
1 |
0 |
|a Barton, Taylor W.
|e contributor
|
| 100 |
1 |
0 |
|a Gordonson, Joshua M.
|e contributor
|
| 700 |
1 |
0 |
|a Gordonson, Joshua M.
|e author
|
| 700 |
1 |
0 |
|a Perreault, David J.
|e author
|
| 245 |
0 |
0 |
|a Transmission Line Resistance Compression Networks and Applications to Wireless Power Transfer
|
| 260 |
|
|
|b Institute of Electrical and Electronics Engineers (IEEE),
|c 2015-03-12T19:27:06Z.
|
| 856 |
|
|
|z Get fulltext
|u http://hdl.handle.net/1721.1/95997
|
| 520 |
|
|
|a Microwave-to-dc rectification is valuable in many applications, including RF energy recovery, dc-dc conversion, and wireless power transfer. In such applications, it is desired for the microwave rectifier system to provide a constant RF input impedance. Consequently, variation in rectifier input impedance over varying incident power levels can hurt system performance. To address this challenge, we introduce multiway transmission line resistance compression networks (TLRCNs) for maintaining near-constant input impedance in RF-to-dc rectifier systems. A development of TLRCNs is presented, along with their application to RF-to-dc conversion and wireless power transfer. We derive analytical expressions for the behavior of TLRCNs, and describe two design methodologies applicable to both single and multistage implementations. A 2.45-GHz four-way TLRCN network is implemented and applied to create a 4-W resistance compressed rectifier system that has narrow-range resistive input characteristics over a 10-dB power range. It is demonstrated to improve the impedance match to mostly resistive but variable input impedance class-E rectifiers over a 10-dB power range. The resulting TLRCN plus rectifier system has >50% RF-to-dc conversion efficiency over a >10-dB input power range at 2.45 GHz (peak efficiency 70%), and standing wave ratio <;1.1 over a 7.7-dB range, despite a nonnegligible reactive component in the rectifier loads.
|
| 546 |
|
|
|a en_US
|
| 655 |
7 |
|
|a Article
|
| 773 |
|
|
|t IEEE Journal of Emerging and Selected Topics in Power Electronics
|
