A 440pJ/bit 1Mb/s 2.4GHz multi-channel FBAR-based TX and an integrated pulse-shaping PA
A 2.4GHz TX in 65nm CMOS defines three channels using three high-Q FBARs and supports OOK, BPSK and MSK. The oscillators have -132dBc/Hz phase noise at 1MHz offset, and are multiplexed to an efficient resonant buffer. Optimized for low output power ≈-10dBm, a fully-integrated PA implements 7.5dB dyn...
Main Authors: | Paidimarri, Arun (Contributor), Mercier, Patrick Philip (Contributor), Chandrakasan, Anantha P. (Contributor), Nadeau, Phillip (Contributor) |
---|---|
Other Authors: | Massachusetts Institute of Technology. Department of Electrical Engineering and Computer Science (Contributor) |
Format: | Article |
Language: | English |
Published: |
Institute of Electrical and Electronics Engineers (IEEE),
2015-01-13T19:00:24Z.
|
Subjects: | |
Online Access: | Get fulltext |
Similar Items
-
Multi-channel 180pJ/b 2.4GHz FBAR-based receiver
by: Nadeau, Phillip, et al.
Published: (2015) -
A 2.4 GHz Multi-Channel FBAR-based Transmitter With an Integrated Pulse-Shaping Power Amplifier
by: Paidimarri, Arun, et al.
Published: (2015) -
A 0.68V 0.68mW 2.4GHz PLL for ultra-low power RF systems
by: Paidimarri, Arun, et al.
Published: (2015) -
A +10dBm 2.4GHz Transmitter with sub-400pW Leakage and 43.7% System Efficiency
by: Paidimarri, Arun, et al.
Published: (2015) -
The influence of design parameters on the performance of FBAR in 10–14 GHz
by: Nor N.I.M., et al.
Published: (2017-01-01)