Performance of PES/LSMM-OGCN photocatalytic membrane for phenol removal: effect of OGCN loading

In designing a photocatalytic oxidation system, the immobilized photocatalyst technique becomes highly profitable due to its promising capability in treating organic pollutants such as phenols in wastewater. In this study, hydrophiLic surface modifying macromolecules (LSMM) modified polyethersulfone...

Full description

Bibliographic Details
Main Authors: Salim, N. E. (Author), Nor, N. A. M. (Author), Jaafar, J. (Author), Ismail, A. F. (Author), Matsuura, T. (Author), Qtaishat, M. R. (Author), Othman, M. H. D. (Author), Rahman, M. A. (Author), Aziz, F. (Author), Yusof, N. (Author)
Format: Article
Language:English
Published: MDPI AG, 2018.
Subjects:
Online Access:Get fulltext
LEADER 02404 am a22002413u 4500
001 79695
042 |a dc 
100 1 0 |a Salim, N. E.  |e author 
700 1 0 |a Nor, N. A. M.  |e author 
700 1 0 |a Jaafar, J.  |e author 
700 1 0 |a Ismail, A. F.  |e author 
700 1 0 |a Matsuura, T.  |e author 
700 1 0 |a Qtaishat, M. R.  |e author 
700 1 0 |a Othman, M. H. D.  |e author 
700 1 0 |a Rahman, M. A.  |e author 
700 1 0 |a Aziz, F.  |e author 
700 1 0 |a Yusof, N.  |e author 
245 0 0 |a Performance of PES/LSMM-OGCN photocatalytic membrane for phenol removal: effect of OGCN loading 
260 |b MDPI AG,   |c 2018. 
856 |z Get fulltext  |u http://eprints.utm.my/id/eprint/79695/1/AhmadFauziIsmail2018_PerformanceofPESLSMMOGCNPhotocatalytic.pdf 
520 |a In designing a photocatalytic oxidation system, the immobilized photocatalyst technique becomes highly profitable due to its promising capability in treating organic pollutants such as phenols in wastewater. In this study, hydrophiLic surface modifying macromolecules (LSMM) modified polyethersulfone (PES) hybrid photocatalytic membranes incorporated with oxygenated graphitic carbon nitride (OGCN) was successfully developed using phase inversion technique. The effectiveness of the hybrid photocatalytic membrane was determined under different loading of OGCN photocatalyst (0, 0.5, 1.0, 1.5, 2.0, and 2.5 wt%). The best amount of OGCN in the casting solution was 1.0 wt% as the agglomeration did not occur considering2·h the stability of the membrane performance and morphology. The highest flux of 264 L/m was achieved by PES/LSMM-OGCN1.5wt% membrane. However, the highest flux performance was not an advantage in this situation as the flux reduced the rejection value due to open pores. The membrane with the highest photocatalytic performance was obtained at 1.0 wt% of OGCN loading with 35.78% phenol degradation after 6 h. Regardless of the lower rejection value, the performance shown by the PES/LSMM-OGCN1.0wt% membrane was still competent because of the small difference of less than 1% to that of the PES/LSMM-OGCN0wt% membrane. Based on the findings, it can be concluded that the optimisation of the OGCN loading in the PES hybrid photocatalytic membrane indeed plays an important role towards enhancing the catalyst distribution, phenol degradation, and acceptable rejection above all considerations. 
546 |a en 
650 0 4 |a TP Chemical technology