Nanoindentation approach on investigating micromechanical properties of joining from green solder materials

Nanoindentation approach on investigating micromechanical properties of joining from green solder materials

This work investigates the micromechanical properties of Sn96.5Ag3.0Cu (SAC 305) on Immersion Tin (ImSn) surface finished after subjected to high temperature storage (HTS) at 180°C for 200 to 1000 h period. Nanoindentation approach was used to measure the micromechanical properties of the solder. It...

Full description

Bibliographic Details
Main Authors:	Maria Abu Bakar (Author), Azman Jalar (Author), Abdul Razak Daud (Author), Roslina Ismail (Author), Nur Azida Che Lah (Author), Najib Saedi Ibrahim (Author)
Format:	Article
Language:	English
Published:	Penerbit Universiti Kebangsaan Malaysia, 2016-08.
Online Access:	Get fulltext

Similar Items

Kesan pigmen pewarna terhadap pertumbuhan sebatian antara logam sambungan pateri Sn-3.0Ag-0.5Cu
by: Azman Jalar, et al.
Published: (2018)

Kesan penuaan sesuhu terhadap sifat mikro kekerasan pempaterian Sn-Ag-Cu/CNT/Cu menggunakan pelekukan nano
by: Norliza Ismail, et al.
Published: (2019)

Effect of temperature on strain-induced hardness of lead-free solder wire using nanoindentation approach
by: Norliza Ismail, et al.
Published: (2020)

Penilaian semula pengukuran kuantitatif stereometri terhadap pertumbuhan sebatian antara logam bagi sambungan pateri
by: Maria Abu Bakar, et al.
Published: (2018)

Kesan kemasan permukaan berbeza terhadap sifat mikromekanik sambungan pateri Sac 0307 menggunakan pendekatan pelekukan nano
by: Maria Abu Bakar, et al.
Published: (2018)

Characterization of Oxide Growth on Surface of Al-Mg-Si Welded Joint
by: Azman Jalar, et al.
Published: (2014-01-01)

Nanoindentation relaxation study and micromechanics of Cement-Based Materials
by: Venkovic, Nicolas
Published: (2016)

Nanoindentation analysis of the micromechanical anisotropy in mouse cortical bone
by: Michele Casanova, et al.
Published: (2017-01-01)

Kesan penambahan tiubnano karbon terhadap pertumbuhan lapisan sebatian antara logam sistem pateri Sn-Ag-Cu/Cu akibat penuaan terma
by: Norliza Ismail, et al.
Published: (2018)

Phases Micromechanical Properties of Ni-base Superalloy Measured by Nanoindentation
by: Lembit KOMMEL, et al.
Published: (2012-03-01)

Micromechanical Properties of Steel-Fiber-Reinforced Cementitious Composites Characterized with Nanoindentation
by: Yan-Ru Zhao, et al.
Published: (2021-01-01)

Effect of shock wave on constant load behaviour of Pb-Free/CNT solder joint
by: Norliza Ismail, et al.
Published: (2020)

Pengawalan pertumbuhan sebatian antara logam sambungan pateri-papan litar bercetak menggunakan salutan nikel
by: Maria Abu Bakar, et al.
Published: (2018)

Calibration of a Constitutive Model from Tension and Nanoindentation for Lead-Free Solder
by: Xu Long, et al.
Published: (2018-11-01)

Effect of coating element on joining stability of Sn-0.3Ag-0.7Cu solder joint due to aging test
by: Atiqah Mohd Afdzaluddin, et al.
Published: (2020)

Research of Joining Brittle Nonmetallic Materials with an Active Solder
by: Roman Koleňák, et al.
Published: (2014-01-01)

Kesan gelombang kejutan terhadap sifat mikromekanik sambungan pateri SAC 0307/ENiG menggunakan pendekatan pelekukan nano
by: Maria Abu Bakar, et al.
Published: (2019)

Research on the Underfill Filler Particles for Reliability of Flip-Chip Solder Interconnects by Micromechanical
by: 鍾培原
Published: (2001)

The Study of Cu-Wire Bonding and BGA Solder Ball Joining
by: Kuan-lin Huang, et al.
Published: (2009)

Automatic Joining of Electrical Components to Smart Textiles by Ultrasonic Soldering
by: Sebastian Micus, et al.
Published: (2021-01-01)

Application of the Solders with Magnesium Alloy to Joining and to Surface Metallization of Alumina
by: Hsien-Hsueh Lee, et al.
Published: (2009)

Joining of Magnesium Alloys and Aluminum Alloys Using Sn-Zn Solders
by: Jun-Yen Lee, et al.
Published: (2010)

The Study on the Joining of Ceramic/Copper using Ultrasonics-Aided Activated Solder Technique
by: Chen-Fa Tsai, et al.
Published: (2005)

Effect of Mg on the properties of Lead-Free solders and its Application to joining ceramics
by: Li-Chang Liu, et al.
Published: (2007)

Micromechanisms and micromechanics of Zircaloy-4
by: Evans, Christabel
Published: (2014)

Thermal Cycling of (RE)BCO-Based Superconducting Tapes Joined by Lead-Free Solders
by: Michal Skarba, et al.
Published: (2021-02-01)

Fracture strength of different soldered and welded orthodontic joining configurations with and without filling material
by: Jens Johannes Bock, et al.
Published: (2008-10-01)

Corrosive Properties and Application of Ceramic Metallization and Joining of Magnesium and Aluminum Containing Active Solders
by: Guo-Yang Shiu, et al.
Published: (2014)

Joining of Electromagnetic Steel Using Low Melting Point Aluminum Brazes and Active Solders
by: Ming-Jyun Chen, et al.
Published: (2015)

Effect of scan rate on corrosion inhibition of carbon steel in the presence of rice straw extract - potentiodynamic studies
by: Solhan Yahya, et al.
Published: (2014)

Multiscale modelling of nanoindentation of multi-layered systems
by: Gheewala, Ismail
Published: (2010)

Editorial: Novel Materials for Green Soldering and Brazing
by: M. A. Fazal, et al.
Published: (2021-09-01)

Effect of isothermal aging and copper substrate roughness on the SAC305 solder joint intermetallic layer growth of high temperature storage (HTS)
by: Rabiah Al Adawiyah Ab Rahim, et al.
Published: (2020)

Finite Element Simulation of Nanoindentation on Fused Silica
by: Che-yuan Hung, et al.
Published: (2008)

Dynamic nanoindentation by instrumented nanoindentation and force microscopy: a comparative review
by: Sidney R. Cohen, et al.
Published: (2013-11-01)

Fracture Toughness Study on Bulk Metallic Glasses and Novel Joining Method Using Bulk Metallic Glass Solder
by: Suh, Jin-Yoo
Published: (2009)

Platform to develop exhaust gas sensors manufactured by glass-solder-supported joining of sintered yttria-stabilized zirconia
by: F. Schubert, et al.
Published: (2016-01-01)

Green state joining for injection-molded parts
by: Lin, Yi-Shao
Published: (2012)

Stencil printing of solder paste for reflow soldering of surface mount technology assembly
by: Ismail, Ismarani
Published: (1995)

On the Nanoindentation of the Carbon Nanotubes
by: Petre P. Teodorescu, et al.
Published: (2010-01-01)