Effect of Thickness Reduction on Cold Rolling Process to Microstructure and Brass Hardness

Brass is an alloy between copper (Cu) and zinc (Zn) where the majority of the elements are copper. Brass that undergoes a cold rolling process will experience changes in microstructure and mechanical properties. This study aims to find out the effect of cold rolling process on changes in microstruct...

Full description

Bibliographic Details
Main Authors:	Darmawan Agung Setyo, Febriantoko Bambang Waluyo, Anggono Agus Dwi, Riyadi Tri Widodo Besar, Hamid Abdul
Format:	Article
Language:	English
Published:	EDP Sciences 2018-01-01
Series:	MATEC Web of Conferences
Online Access:	https://doi.org/10.1051/matecconf/201824801001

id	doaj-fc32479c8e514089ac980d8819448e7a
record_format	Article
spelling	doaj-fc32479c8e514089ac980d8819448e7a2021-02-02T03:27:20ZengEDP SciencesMATEC Web of Conferences2261-236X2018-01-012480100110.1051/matecconf/201824801001matecconf_estic2018_01001Effect of Thickness Reduction on Cold Rolling Process to Microstructure and Brass HardnessDarmawan Agung Setyo0Febriantoko Bambang Waluyo1Anggono Agus Dwi2Riyadi Tri Widodo Besar3Hamid Abdul41Department of Mechanical Engineering, Faculty of Engineering, Universitas Muhammadiyah Surakarta1Department of Mechanical Engineering, Faculty of Engineering, Universitas Muhammadiyah Surakarta1Department of Mechanical Engineering, Faculty of Engineering, Universitas Muhammadiyah Surakarta1Department of Mechanical Engineering, Faculty of Engineering, Universitas Muhammadiyah Surakarta2Department of Mechanical Engineering, Faculty of Engineering, Universitas BatamBrass is an alloy between copper (Cu) and zinc (Zn) where the majority of the elements are copper. Brass that undergoes a cold rolling process will experience changes in microstructure and mechanical properties. This study aims to find out the effect of cold rolling process on changes in microstructure and hardness of brass. The composition of brass is analyzed by using Energy Dispersive Spectroscopy technique, while microscope optic is used to obtain microstructure photograph of brass. The hardness of brass is measured before and after cold rolling process. The test results show that cold rolling process causes the increase of hardness on brass, change of grain shape, and the appearance of deformation bands on brass.https://doi.org/10.1051/matecconf/201824801001
collection	DOAJ
language	English
format	Article
sources	DOAJ
author	Darmawan Agung Setyo Febriantoko Bambang Waluyo Anggono Agus Dwi Riyadi Tri Widodo Besar Hamid Abdul
spellingShingle	Darmawan Agung Setyo Febriantoko Bambang Waluyo Anggono Agus Dwi Riyadi Tri Widodo Besar Hamid Abdul Effect of Thickness Reduction on Cold Rolling Process to Microstructure and Brass Hardness MATEC Web of Conferences
author_facet	Darmawan Agung Setyo Febriantoko Bambang Waluyo Anggono Agus Dwi Riyadi Tri Widodo Besar Hamid Abdul
author_sort	Darmawan Agung Setyo
title	Effect of Thickness Reduction on Cold Rolling Process to Microstructure and Brass Hardness
title_short	Effect of Thickness Reduction on Cold Rolling Process to Microstructure and Brass Hardness
title_full	Effect of Thickness Reduction on Cold Rolling Process to Microstructure and Brass Hardness
title_fullStr	Effect of Thickness Reduction on Cold Rolling Process to Microstructure and Brass Hardness
title_full_unstemmed	Effect of Thickness Reduction on Cold Rolling Process to Microstructure and Brass Hardness
title_sort	effect of thickness reduction on cold rolling process to microstructure and brass hardness
publisher	EDP Sciences
series	MATEC Web of Conferences
issn	2261-236X
publishDate	2018-01-01
description	Brass is an alloy between copper (Cu) and zinc (Zn) where the majority of the elements are copper. Brass that undergoes a cold rolling process will experience changes in microstructure and mechanical properties. This study aims to find out the effect of cold rolling process on changes in microstructure and hardness of brass. The composition of brass is analyzed by using Energy Dispersive Spectroscopy technique, while microscope optic is used to obtain microstructure photograph of brass. The hardness of brass is measured before and after cold rolling process. The test results show that cold rolling process causes the increase of hardness on brass, change of grain shape, and the appearance of deformation bands on brass.
url	https://doi.org/10.1051/matecconf/201824801001
work_keys_str_mv	AT darmawanagungsetyo effectofthicknessreductiononcoldrollingprocesstomicrostructureandbrasshardness AT febriantokobambangwaluyo effectofthicknessreductiononcoldrollingprocesstomicrostructureandbrasshardness AT anggonoagusdwi effectofthicknessreductiononcoldrollingprocesstomicrostructureandbrasshardness AT riyaditriwidodobesar effectofthicknessreductiononcoldrollingprocesstomicrostructureandbrasshardness AT hamidabdul effectofthicknessreductiononcoldrollingprocesstomicrostructureandbrasshardness
_version_	1724307739778220032

Effect of Thickness Reduction on Cold Rolling Process to Microstructure and Brass Hardness

Similar Items