Numerical Simulation of Galvanic Corrosion between Carbon Steel and Low Alloy Steel in a Bolted Joint
The galvanic corrosion of a bolt joint combining carbon steel end plate and low alloy steel bolt was investigated electrochemically in a 1 M HCl solution. The corrosion parameters of the joint components were used for numerical simulation using Comsol Multiphysics software to analyze the galvanic co...
Main Authors: | Rachid Radouani, Younes Echcharqy, Mohamed Essahli |
---|---|
Format: | Article |
Language: | English |
Published: |
Hindawi Limited
2017-01-01
|
Series: | International Journal of Corrosion |
Online Access: | http://dx.doi.org/10.1155/2017/6174904 |
Similar Items
-
Corrosion of bare and galvanized steel in gypsum
by: Mercedes Gómez, et al.
Published: (1988-12-01) -
Effect of hot dip galvanization on the fatigue strength of steel bolted connections
by: S.M.J. Razavi, et al.
Published: (2017-06-01) -
Effect of hot dip galvanization on the fatigue strength of steel bolted connections
by: S.M.J. Razavi, et al.
Published: (2017-07-01) -
Failure Analysis of High Strength Galvanized Bolts Used in Steel Towers
by: Jose Alberto Álvarez, et al.
Published: (2016-07-01) -
Galvanic Mechanism of Localized Corrosion for Mild Steel in Carbon Dioxide Environments
by: Han, Jiabin
Published: (2009)