| Summary: | Reinforced concrete Special Moment Frame (RC-SMF) with irregularity in dimension experiences large inelastic deformation under ground motion. The building code for designing structural elements generally is focused on satisfying the strength and serviceability. On the other hand, the displacement-based design (DBD) procedure is based on building performance level. This paper presents a devoted study of designing structural elements of 8 story RC-SMF with vertical irregularity using the DBD method. This method is mainly using energy-work balance concept with pre-selected yield mechanism and target drift. Moreover, a new lateral force distribution method is used in this study which accounts for inelastic dynamic response and higher mode effects. Strong column-weak beam mechanism is used to design beam and column, and beam moment capacity of each floor is calculated by equating external work to internal work approach. Furthermore, column design strength is taken as the combination of factored gravity loads and maximum expected strength of the beam. The time history analysis results show that story drift is below than the target drift and achieve the desired performance level. Moreover, the results also show lateral force distribution is very close to the lateral shear distribution which obtained from time history analysis.
|
|---|
