Friction Model of Industrial Robot Joint with Temperature Correction by Example of KUKA KR10
The quality of industrial robots essentially depends on the properties of their kinematic couples. This research has involved conducting an experimental study of the friction torque in a joint of the KUKA KR10 industrial robot and building its model. It has been established that the largest impact o...
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Hindawi Limited
2019-01-01
|
| Series: | Journal of Robotics |
| Online Access: | http://dx.doi.org/10.1155/2019/6931563 |
| Summary: | The quality of industrial robots essentially depends on the properties of their kinematic couples. This research has involved conducting an experimental study of the friction torque in a joint of the KUKA KR10 industrial robot and building its model. It has been established that the largest impact on friction in the joint is caused by its axial load and velocity, as well as the temperature of the mechanism, which is generally not homogeneous. It is not possible to measure temperature fields in the joints of a serial industrial robot directly. This study has set forth a method to estimate friction torque taking into account the temperature factor indirectly. For this, we have used the motor temperature available for measuring in combination with special periodical motions, performed by the robot, during which we estimated the actual friction torque in the joint and calculated a temperature correction based on our findings. |
|---|---|
| ISSN: | 1687-9600 1687-9619 |