An Improved Abrasive Flow Processing Method for Complex Geometric Surfaces of Titanium Alloy Artificial Joints

An Improved Abrasive Flow Processing Method for Complex Geometric Surfaces of Titanium Alloy Artificial Joints

Precise processing for complex geometric surfaces of titanium alloy artificial joints has higher technical difficulties. This paper addresses the matter by proposing an improved abrasive flow processing method. According to the micro-cutting principle, the processing mechanism on curvature surface o...

Full description

Bibliographic Details
Main Authors:	Li Zhang, Zhimin Yuan, Dapeng Tan, Yi Huang
Format:	Article
Language:	English
Published:	MDPI AG 2018-06-01
Series:	Applied Sciences
Subjects:	abrasive flow complex surface titanium alloy artificial joint material removal model multi-segment profiling flow passage
Online Access:	http://www.mdpi.com/2076-3417/8/7/1037

Similar Items

Effect of Magnetic Head Shape on Processing of Titanium Alloy Wire by Magnetic Abrasive Finishing
by: Wenlong Li, et al.
Published: (2020-03-01)

Abrasive waterjet (AWJ) titanium tangential turning evaluation
by: S. Hloch, et al.
Published: (2014-10-01)

ABRASIVE ABSORPTION STUDY IN AWJ CUTTING
by: Bogdan BARABAŞ, et al.
Published: (2016-11-01)

Methods for producing permanent joints of aluminum and titanium alloys
by: B. M. Nemenenok, et al.
Published: (2020-04-01)

Simple Approach for Evaluation of Abrasive Mixing Efficiency for Abrasive Waterjet Rock Cutting
by: Yohan Cha, et al.
Published: (2021-02-01)

The Influence of Material Type and Hardness on the Number of Embedded Abrasive Particles during Airborne-Particle Abrasion
by: Klimek, L., et al.
Published: (2022)

Research on removal function of fluid hydrodynamic fixed abrasive grinding
by: Pengfei Liu, et al.
Published: (2020-07-01)

Production and Properties of Electron-Beam-Welded Joints on Ti-TiB Titanium Alloys
by: Petro Loboda, et al.
Published: (2020-04-01)

Abrasive jet machining of glass: Experimental investigation with artificial neural network modelling and genetic algorithm optimisation
by: El Shimaa Abdelnasser, et al.
Published: (2016-12-01)

Hot deformation behavior of TC18 titanium alloy
by: Jia Bao-Hua, et al.
Published: (2013-01-01)

EFFECTS OF ABRASIVES DURING ACCELERATED SIMULATION OF MECHANICAL CORROSION OF CEMENT COMPOSITES USING ABRASIVE WATER FLOW
by: Petr Hlaváček, et al.
Published: (2019-07-01)

NaC1-induced hot corrosion of a titanium aluminide alloy
by: Yao, Zhimin
Published: (2008)

The Predictive Model of Surface Texture Generated by Abrasive Water Jet for Austenitic Steels
by: Ján Kmec, et al.
Published: (2020-05-01)

Experimental investigation into nano-finishing of β-TNTZ alloy using magnetorheological fluid magnetic abrasive finishing process for orthopedic applications
by: Chander Prakash, et al.
Published: (2021-03-01)

Quality analysis of T-tube with solid-liquid two-phase abrasive flow polished
by: Junye Li, et al.
Published: (2017-06-01)

Stress modelling of welded titanium alloy (grade 5) pipes
by: Inyang, Etienying Edem
Published: (2016)

Homemade abrasion tester and its application for abrasion resistance testing of crease points on down fabrics
by: Yidie GUAN, et al.
Published: (2017-02-01)

Application of the Strain Compensation Model and Processing Maps for Description of Hot Deformation Behavior of Metastable β Titanium Alloy
by: Oleksandr Lypchanskyi, et al.
Published: (2021-04-01)

Beta Titanium Alloys Produced from Titanium Hydride: Effect of Alloying Elements on Titanium Hydride Decomposition
by: Caterina Chirico, et al.
Published: (2020-05-01)

Hot deformation behavior and constitutive equation of TB8 titanium alloy with a lamellar structure of α phase
by: ZHOU Ya-li, et al.
Published: (2021-01-01)

Microstructural characterization of titanium alloys with fretting damage
by: Swalla, Dana Ray
Published: (2005)

Microstructure Evolution and Material Flow Behavior in Friction-Stir Welded Dissimilar Titanium Alloys
by: Gonser, Matthew J.
Published: (2010)

Modeling and analysis of a novel rotational magnetorheological abrasive flow finishing process
by: Vipin Kumar Sharma
Published: (2021-09-01)

Electrochemical behaviour of titanium alloys in artificial saliva
by: Mareci Daniel, et al.
Published: (2005-01-01)

Electrochemical behaviour of titanium alloys in artificial saliva
by: DANIEL MARECI, et al.
Published: (2005-06-01)

Microstructure Control of Welded Joints of Dissimilar Titanium Alloys by Isothermal Forging
by: Yongqiang Zhang, et al.
Published: (2020-07-01)

Abrasion wear resistance of different artificial teeth opposed to metal and composite antagonists
by: Pâmela Carbone Mello, et al.
Published: (2009-10-01)

Effect of Abrasive Machining on the Electrical Properties Cu86Mn12Ni2 Alloy Shunts
by: Siti Nabilah Misti, et al.
Published: (2017-07-01)

Investigation of the Restored Joint for Aluminum Alloy
by: Chao Chen, et al.
Published: (2020-01-01)

Magneto-Rheological Fluid Assisted Abrasive Nanofinishing of β-Phase Ti-Nb-Ta-Zr Alloy: Parametric Appraisal and Corrosion Analysis
by: Sunpreet Singh, et al.
Published: (2020-11-01)

Brazing of Titanium with Aluminium Alloys
by: Winiowski A., et al.
Published: (2017-06-01)

Constitutive Model Prediction and Flow Behavior Considering Strain Response in the Thermal Processing for the TA15 Titanium Alloy
by: Jiang Li, et al.
Published: (2018-10-01)

Progress in Research on Flow Softening Behavior of Near β Titanium Alloys During Hot Compression Deformation Process
by: LIU Shao-fei, et al.
Published: (2017-02-01)

Mechanical properties of dilute zinc - titanium alloys
by: Waldron, Robert James
Published: (2011)

Investigation on kerf taper in abrasive waterjet machining of aluminium alloy 6061-T6
by: Shu Wang, et al.
Published: (2021-11-01)

Parameters Optimization and Numerical Simulation for Soft Abrasive Flow Machining
by: Qiaoling YUAN, et al.
Published: (2014-08-01)

Initial β Grain Size Effect on High-Temperature Flow Behavior of Tb8 Titanium Alloys in Single β Phase Field
by: Qiuyue Yang, et al.
Published: (2019-08-01)

Flow Field Analysis Inside and at the Outlet of the Abrasive Head
by: Zdenek Riha, et al.
Published: (2021-07-01)

The single factor experiment of the non-linear tube in abrasive flow machining
by: Fengyu Sun, et al.
Published: (2017-03-01)

Research on Abrasive Belt Based Machining Technology for Milling Shaped Aero-Engine Blades
by: Lei Qiu, et al.
Published: (2019-01-01)